基于模糊综合评价法的城市综合管廊结构健康评价方法研究

为解决城市综合管廊结构健康状况评估结果无法量化和指导运维的问题，通过分析模糊综合评价理论在交通隧道结构健康评价方法研究中的应用，依照类比思想，利用该理论建立城市综合管廊结构健康状况评价体系。首先，依据有关养护规定和调研结果，基于不同需求分别建立管廊结构的本体完好状况和本体结构状况评价指标体系； 其次，以交通隧道和综合管廊养护经验为基础，划分各指标的分级判定标准； 然后，采用层次分析法，计算评价指标的权重分配； 最后，采用柯西分布型隶属函数和矩阵型隶属函数确定各指标的隶属度，建立一级和二级模糊综合评价模型，赋予评价向量中各评语相应分值，将评价向量单值化，判定管廊结构健康状况。采用所提出的评价方法应用于实际工程，所得评价结果与经验评判得到的结果相同。     

Studying the benefits of carpooling in an urban area using automatic vehicle identification data

Carpooling has been considered a solution for alleviating traffic congestion and reducing air pollution in cities. However, the quantification of the benefits of large-scale carpooling in urban areas remains a challenge due to insufficient travel trajectory data. In this study, a trajectory reconstruction method is proposed to capture vehicle trajectories based on citywide license plate recognition (LPR) data. Then, the prospects of large-scale carpooling in an urban area under two scenarios, namely, all vehicle travel demands under real-time carpooling condition and commuter vehicle travel demands under long-term carpooling condition, are evaluated by solving an integer programming model based on an updated longest common subsequence (LCS) algorithm. A maximum weight non-bipartite matching algorithm is introduced to find the optimal solution for the proposed model. Finally, road network trip volume reduction and travel speed improvement are estimated to measure the traffic benefits attributed to carpooling. This study is applied to a dataset that contains millions of LPR data recorded in Langfang, China for 1 week. Results demonstrate that under the real-time carpooling condition, the total trip volumes for different carpooling comfort levels decrease by 32–49%, and the peak-hour travel speeds on most road segments increase by 5–40%. The long-term carpooling relationship among commuter vehicles can reduce commuter trips by an average of 30% and 24% in the morning and evening peak hours, respectively, during workdays. This study shows the application potential and promotes the development of this vehicle travel mode.     

State estimation in roll dynamics for commercial vehicles

Accurate lateral load transfer estimation plays an important role in improving the performance of the active rollover prevention system equipped in commercial vehicles. This estimation depends on the accurate prediction of roll angles for both the sprung and the unsprung subsystems. This paper proposes a novel computational method for roll-angle estimation in commercial vehicles employing sensors which are already used in a vehicle dynamic control system without additional expensive measurement units. The estimation strategy integrates two blocks. The first block contains a sliding-mode observer which is responsible for calculating the lateral tyre forces, while in the second block, the Kalman filter estimates the roll angles of the sprung mass and those of axles in the truck. The validation is conducted through MATLAB/TruckSim co-simulation. Based on the comparison between the estimated results and the simulation results from TruckSim, it can be concluded that the proposed estimation method has a promising tracking performance with low computational cost and high convergence speed. This approach enables a low-cost solution for the rollover prevention in commercial vehicles.     

Design of tyre force excitation for tyre–road friction estimation

Knowledge of the current tyre–road friction coefficient is essential for future autonomous vehicles. The environmental conditions, and the tyre–road friction in particular, determine both the braking distance and the maximum cornering velocity and thus set the boundaries for the vehicle. Tyre–road friction is difficult to estimate during normal driving due to low levels of tyre force excitation. This problem can be solved by using active tyre force excitation. A torque is added to one or several wheels in the purpose of estimating the tyre–road friction coefficient. Active tyre force excitation provides the opportunity to design the tyre force excitation freely. This study investigates how the tyre force should be applied to minimise the error of the tyre–road friction estimate. The performance of different excitation strategies was found to be dependent on both tyre model choice and noise level. Furthermore, the advantage with using tyre models with more parameters decreased when noise was added to the force and slip ratio.     

机动车交通流比功率与能耗模型研究

为研究机动车交通流能耗,将机动车交通流比功率(VSP)作为研究对象.从最常见的单车比功率研究出发,使用气体动力学交通流模型联系单车比功率与交通流整体比功率,以此建立交通流比功率模型.为使此模型具备更显著的物理意义,将交通流比功率分为两部分,一部分为平衡交通流状态下的比功率,另一部分为偏离平衡交通流状态导致的比功率变化量,模型中的交通流参数与变量能够通过现有的交通流探测设备获取.将比功率理论模型从单车扩展到了交通流,用数学公式反应了交通流状态与比功率的关系,并且证明了交通流比功率能够通过交通流参数进行估计.并由交通流比功率出发,推导出交通流比功公式.此外研究了平衡态交通流比功率及比功与密度的关系.为研究机动车交通流能耗探索了新的思路.     

城市交通状态的空间依赖性和异质性分析

有关城市交通状态空间特征的研究相对匮乏。从空间角度分析城市宏观交通特征,首先,针对城市路网几何形态和交通数据的关系提出适合于城市交通数据分析的空间模型。然后,以从长期的浮动车数据中提取的路段行程速度作为描述交通状态的实验数据,分别采用空间自相关和核密度估计法定量分析路网行程速度的空间依赖性和空间异质性,并分析其在典型时段的空间分布特征。结果显示:城市交通状态的关联性在空间上随着路段间距的增长而衰减;城市交通状态的空间分布特征随时间变化,受路网结构和区域功能的影响在空间中呈现集聚特征。     

基于人头目标检测的商场人流量自动统计

针对商场人流量自动统计中行人遮挡情况下计数的困难,提出基于人头目标检测的商场人流量自动统计算法.首先提取Haar特征训练Adaboost人头目标分类器,再利用Camshift算法对目标进行跟踪,使用Kalman缩小跟踪目标的搜索范围,最后利用人头模板匹配方法,判断目标是否属于同一行人.实验结果表明,此方法平均正确率达到98.2%,且统计每个行人目标只需19 ms.     

基于特征熵权与样本加权的大跨桥梁多车道交通荷载聚类模型

为满足交通流荷载作用下大跨桥梁结构评估的需要,研究了基于荷载参数特征的交通流状态划分方法。首先,基于实测交通流数据,按照车道属性统计分析得到交通流的单位小时特征参数样本,选择单位小时内车型比例、车头间距及交通流速度作为交通流状态划分的参考特征;其次,改进经典k-means聚类算法以增强其对高维、复杂交通流荷载分类的鲁棒性,即通过引入特征熵值来表征各特征参数对聚类效果的重要性,同时计算样本点与周围样本点的接近程度来赋予样本点权值,以削弱样本离散性对聚类质量的不利影响;最后,通过聚类算法得到11种具有不同参数特征的交通流荷载,分析了其作用下某大跨斜拉桥拉索应力响应及造成的疲劳损伤。结果表明：改进算法的聚类质量指标比原始k-means算法提高了40%以上,对交通流状态划分具有良好的适用性;通过算法得到的不同类别的交通流荷载的特征参数差异性明显,其占有率也大不相同,同一类别的交通流荷载各样本特征参数聚拢效果良好;同车道内不同类别的交通流荷载的拉索等效应力差别较大,其变异系数均在0.2以上,尤其在考虑了不同交通流荷载模型的占有率后,这种差异性进一步增大。上述结果表明该交通流荷载聚类与模拟方法是有...     

基于VHDL有限状态机的交通信号灯控制系统设计

交叉路口交通灯控制的现状,对交通顺畅十分重要.以可编程逻辑器件(CPLD)为核心,应用VDHL语言和有限状态机的方法设计交通信号灯控制系统,在MAX+PLUS Ⅱ环境下进行了仿真实验,结果显示该设计符合设计要求,通过实验,验证了设计的正确性.     

关于图的谱半径的新的上界

主要得到了一个关于图的谱半径的新的上界,并举例说明在某些情况下我们的结果是好的.