超大型群桩基础承载特性离心模型试验研究

通过18根和64根群桩离心模型试验,获得了荷载~沉降关系曲线、桩身轴力分布,研究了在竖向荷载作用下超大型群桩基础的承载变形特性和群桩效应,分析了桩身轴力分布、桩顶荷载分布等变化规律。     

五河口斜拉桥超长大直径工程试桩研究

为获取五河口斜拉桥超长大直径工程桩的极限承载力值，对2根直径2．5m桩长95m的工程桩，采用桩基静栽试验自平衡法单、双荷载箱技术进行试桩研究，为最终确定桥墩桩基础设计提供了直观的参考依据。该试桩方法适合特大型桥梁桩基施工场地小、试验时间短、试桩荷载大的要求，试桩经注浆补强工艺后可作工程桩应用。     

高速公路沥青混凝土桥面病害分析与处治

文章通过对高速公路混凝土桥面铺装出现病害问题,分析病害产生的原因,提出了相应的设计、施工及养护等方面的改进建议和具体方案,对桥面铺装设计和施工有一定的参考价值。     

屏山渡湘江大桥设计

屏山渡湘江大桥采用预应力混凝土连续箱梁,跨径组合为45 270 45m,桥墩高度仅7·4m。文章简要介绍了该桥的总体方案设计、上部结构设计、计算要点以及底板上弯钢束布置,为类似桥梁的设计提供借鉴。     

公路客运班车报停制度研究

公路客运峰谷现象明显,在运能、运力有限的情况下,如何才能更好地满足客运高峰期(如春运)的交通需求是政府和企业的一项重要课题。现有的政策并没有使有限的客运资源得到最合理的利用,给能源和环境都带来了一定的影响。文章较系统地从企业和政府两个角度论述了建立班车报停制度的必要性和可行性,通过对客运线路的调查,对公路客运班车报停制度的社会经济效益作了定性和定量分析。     

沉管隧道地震响应分析

文章采用田村重四郎和冈本舜三提出的沉埋隧道地震响应分析的数学模型,对南京长江越江隧道(沉管段)方案进行了地震响应的纵向受力分析。分析中采用了隧址处100年超越概率为2%的人工合成地震加速度,考虑了不同管段的联结方式和不同的计算参数,对初步设计中沉管段结构的安全性进行了论证,所提供的数据曾为设计单位所采纳[1]。     

Experiential Incrementalism: On the Theory and Technique to Implement Transport Plans and Policies

The paper describes an approach to the vexing problem of transport planning and policy. It deals jointly with three questions, which in today's practice are addressed separately: How are hypotheses about transport problems and alternatives to their solution developed? How can a good plan or policy be identified? What is the process of implementing a transport plan or policy? In doing this the paper has the ambitious objective of proposing a new model and process for transport planning and policy. It is applicable in developed and developing countries and is not restricted to the transport sector. The paper builds on, and is a reinterpretation of two cornerstone transport planning and decision-making models – the CATS (Chicago Area Transportation Study) Planning and Design Model and Braybrooke and Lindblom's Disjointed Incrementalism. It advances a technique of experiential incrementalism (termed polisanalysis) to develop and implement plans and policies. It proposes that problems should be diagnosed by observation and continuous data collection; that their continuous analysis, finding the “cure”, and implementation take place through the method of experiential incrementalism. In this method interventions are grounded on the theories of neoinstitutional economics and psychoanalysis and derived using contact function, explained in the paper, which renders the method scientific replicability. Experiential incrementalism can employ a wider array of options in planning and policy than is presently thought possible. Like other scientific methods, its application requires rigorous training.     

Modelling of wheels and rail discontinuities in dynamic wheel-rail contact analysis

A classification of wheel-rail contact is given. Difference is made between modelling of a running wheel with continuous single-point-contact, as is common practice in wheel-rail contact analysis, and a wheel with transient double- or multi-point-contact, which may occur for rail irregularities with curvatures larger than that of the wheel circumference. It is shown that application of the first model for these irregularities will strongly underestimate the contact forces as it does not describe occurring mechanisms correctly. Further, it is shown that in principle it is not possible to describe the second type of contact fully correct with a lumped wheel model. Both wheel models are formulated mathematically for some basic contact cases. Afterwards, results are applied to a linear track model. Analytical closed-form solutions are found in the frequency domain for arbitrary type of contact and numerically transformed to the time domain. Finally, the necessity is shown to avoid situations where transient multiple-point-contact may occur (like rail joints) in practice.     

Tractor-semitrailer model for vehicles carrying liquids

This article presents a model for solving solid-fluid interactions in vehicles carrying liquids. A tractor-semitrailer model is developed by incorporating suspension systems and tire dynamics. Owing to the solid-fluid interaction, equations of motion for the vehicle system are coupled. To simplify the complicated solution procedure, the coupled equations are solved separately using two different codes. Each code is analyzed separately; but as the parameters of the two codes depend on each other, the codes must be connected at the end of each time step. To determine the dynamic behavior of the system, different braking moments are applied. As the braking moments increase, braking time decreases. However, it turns out that increasing the braking moment to more than a certain level produces no significant results. It is also shown that vehicles carrying fluids need a greater amount of braking moments in comparison to vehicles carrying solids during braking. In addition, as the level of the fluid inside the tanker increases, from one-third to two-third of the tanker's volume, the sloshing forces applied to the tanker's walls increase. It was also concluded that the strategy used in this article to solve for the solid-fluid interaction by incorporating vehicle dynamic effects represents an effective method for determining the dynamic behavior of vehicles carrying fluids in other critical maneuvers.     

提前右转的科学性论证

分析了十字交叉路口直行车流和右转车流产生交通分流冲突的原因,以及因此而造成的交通事故隐患。为解决这个问题,笔者在借鉴国内外交通冲突技术(TCT)的理论研究成果的基础上,建立了十字路口直行车流和右转车流分流冲突模型,并用北京市火神庙十字路口的调查统计数据对模型进行了验证,从而在理论上证明了"提前右转"对于减少交通冲突,提高交叉路口安全的科学性,对于交叉路口设计和改造具有较强的指导意义。