A passenger car driver model for higher lateral accelerations

Due to increasing demands for time and cost efficient vehicle and driver assistant systems development, numerical simulation of closed-loop manoeuvres becomes increasingly important. Thus, the driver has to be considered in the modelling. On the basis of a two-layer approach to model a driver's steering behaviour, the field of application is extended to higher lateral accelerations in this study. An analytical method to determine the driver parameters is presented, which is based on the two-wheel vehicle model. The simulation results are determined using a full vehicle model including all essential nonlinearities. Standard manoeuvres in the nonlinear range of vehicle handling behaviour are performed. A cornering manoeuvre is chosen to show the characteristics of the proposed driver model.     

斯太尔汽车双前轴转向机构分析及其应用

本文在对斯太尔重型汽车的双轴转向传动机构进行分析的基础上建立了数学模型,研究了各部分的传动过程,并采用MATLAB语言编写了转向传动机构分析程序,对转向轴内外轮之间,前后轮间的转角匹配,以及最小转弯半径的匹配关系进行了优化。     

不同优化方法对斜拉桥成桥状态的影响分析探究

参考工程案例实用数据,借助有限元数理计算方式,基于零点移位法和最小屈曲应变能法,对斜拉索桥成桥状态数理计算开展专题分析探究。经过相关索力、弯矩及线形比对,分析了不同优化计算方法对该类型桥梁成桥状态的影响,以为同类斜拉索桥工程应用提供研究和技术参考,助力建设安全牢固的斜拉索桥梁。     

How well a single-track linear model captures the lateral dynamics of long combination vehicles

ABSTRACT

The effect of centre-of-gravity heights on the high-speed performance measures of long combination vehicles including truck with double centre-axle trailers, Nordic, and A-double combination vehicles is investigated. The high fidelity three-dimensional models, used in this research, are validated against physical test data. These models are often accurate in terms of the actual dynamic behaviours of the vehicle. On the other hand, the simple yaw-plane single-track models with linear tires require less number of vehicle parameters. In this paper, it is investigated how accurate the estimations of performance measures are at high forward speeds by such single-track linear (STL) models. The influence of load height is especially studied. The high-speed performance-based standard or PBS measures considered are rearward amplifications of both lateral acceleration and yaw velocity; lateral load transfer; yaw damping and high-speed transient offtracking. The results show that tire relaxation has a large effect and it is rather easy to add to an STL model, so it is assumed to be modelled in STL. With realistically high payload and a required accuracy of PBS measures of approximately 10%, only the accuracy of rearward amplification of yaw velocity calculated by the frequency response is fulfilled by the STL. With low payload, the same statement is valid, but with around 5% in required accuracy. The roll dynamics effects are more important than the tire non-linearities.     

电磁环境船模预测技术的误差分析研究

基于缩比船模原理,从模型限制误差、方法误差和问题本身的误差等方面分析电磁环境船模预测技术的主要误差源,并在此基础上分别论述上述误差源对电磁环境预测精度产生的影响.可以有针对性地采取相应措施控制误差,以更好地获取逼近于实船的电磁环境分布特性.     

基于冲突技术法的主路优先交叉口通行能力研究

在分析主路优先交叉口交通特性的基础上，确定交通流优先等级，引入冲突技术法构建通行能力模型。以442型交叉口为例，给出不同车道布局形式下的通行能力计算模型。通过实例分析，给出了模型中各参数的建议值，并验证了模型的有效性。     

宝马车系诊断设备及电控发动机的重点组成部件

介绍宝马发动机电控系统诊断信息、车间诊断设备、电控发动机的重点组成部件。     

Application of time-variant predictive control to modelling driver steering skill

The paper addresses the need for improved mathematical models of human steering control. A multiple-model structure for a driver's internal model of a nonlinear vehicle is proposed. The multiple-model structure potentially offers a straightforward way to represent a range of driver expertise. The internal model is combined with a model predictive steering controller. The controller generates a steering command through the minimisation of a cost function involving vehicle path error. A study of the controller performance during an aggressive, nonlinear steering manoeuvre is provided. Analysis of the controller performance reveals a reduction in the closed-loop controller bandwidth with increasing tyre saturation and fixed controller gains. A parameter study demonstrates that increasing the multiple-model density, increasing the weights on the path error, and increasing the controller knowledge range all improved the path following accuracy of the controller.     

EVS耦合地层-岩性三维地质建模方法在南宁地铁工程中的应用

为解决地质建模软件Earth Volumetric Studio（EVS）存在的地层建模方法无法对钻孔揭露地层比较复杂的情形进行层序划分，岩性建模方法无法生成连续光滑的层间界面等问题，以南宁市轨道交通3号线青秀山站至博艺路站区间段为研究对象，提出一种同时具有表达复杂透镜体和清晰的地质层面能力的EVS地层-岩性建模方法。通过工程实例将该方法分别与地层建模和岩性建模方法进行对比分析和交叉验证计算，结果表明采用地层-岩性建模方法建立的模型比单独使用地层模型和岩性模型更能反映实际的地质情况，且模型具有更高的精度，模型的相对误差和均方根误差较地层建模方法明显降低。     

基于期望熵的人才流动模型及其选择

Shannon熵可以表示模型不稳定性。本文提出了期望熵的概念并在此基础上建立了人才流动模型。本文还讨论了该模型的选择，并通过抽样调查进行了验证。