基于LabVIEW和PXI的电力机车电气综合性能测试系统

介绍了电力机车电气综合性能测试平台的基本组成,从硬件平台、软件设计等方面详细分析了基于LabVIEW和PXI的电力机车电气综合性能测试系统的开发应用。     

钢桥面板顶板-纵肋连接接头的疲劳性能

对钢桥面板整体模型进行了有限元分析。结果表明,顶板横向应力在横桥向的分布表现出类似弹性支承多跨连续梁的受力特点,且顶板横向应力基本全部为弯曲应力,膜应力很小,在顶板-纵肋连接处纵肋应力远小于顶板横向应力。顶板-纵肋连接处的应力纵向和横向影响线很短,疲劳验算可不考虑同一车辆轴重间的相互影响及多车效应。增加顶板厚度可大大降低顶板的应力幅,铺装层的完整性对钢桥面板十分重要。此外,还对该类型接头的疲劳分级及现行欧洲规范Eurocode和美国规范AASHTO LRFD的相关条款进行了分析。为考虑车辆荷载通过引起的非成比例多轴疲劳效应,轮荷载滚动加载足尺模型试验和分析方法需要进一步深入研究。     

Impact of inerter nonlinearities on vehicle suspension control

This paper discusses the nonlinear properties of inerters and their impact on vehicle suspension control. The inerter was recently introduced as an ideal mechanical two-terminal element, which is a substitute for the mass element, where the applied force is proportional to the relative acceleration across the terminals. Until now, ideal inerters have been applied to vehicle, motorcycle and train suspension systems, in which significant performance improvement was achieved. However, due to the mechanical construction, some nonlinear properties of the existing mechanical models of inerters are noted. This paper investigates the inerter nonlinearities, including friction, backlash and the elastic effect, and their influence on vehicle suspension performance. A testing platform is also built to verify the nonlinear properties of the inerter model.     

The effects of wheelset driving system suspension parameters on the re-adhesion performance of locomotives

In this study, in order to examine the effects of a wheelset driving system suspension parameters on the re-adhesion performance of locomotives, the stick–slip vibration was analysed according to theoretical and simulation analysis. The decrease of the slip rate vibration amplitude improved the stability of the stick–slip vibration and the re-adhesion performance of locomotives. Increasing the longitudinal guide stiffness of the wheelset and the motor suspension stiffness were proposed as effective measures to improve the re-adhesion performance of locomotives. These results showed that the dynamic slip rate was inversely proportional to the series result of the square root of the longitudinal guide and motor suspension stiffness. The larger the motor suspension stiffness was, the smaller the required longitudinal guidance stiffness was at the same re-adhesion time once the wheel slip occurred, and vice versa. The simulation results proved that the re-adhesion time of the locomotive was approximately proportional to amplitude of the dynamic slip rate. When the stick–slip vibration occurred, the rotary and the longitudinal vibrations of the wheelset were coupled, which was confirmed by train's field tests.     

大跨度地下结构不同施工方法对围岩力学行为的影响

结合某工程，对断面在１００ｍ＾２以上的大跨度地下结构进行模型试验和有限元计算分析，探讨了不同施工方法引起周围介质的力学行为，提出了判断优化施工方法的依据。     

浮置板式轨道结构隔振效果仿真研究

建立列车—轨道结构耦合系统有限元模型,将轨道不平顺作为列车—轨道结构耦合系统的激励源,对普通碎石道床轨道结构和浮置板式轨道结构的列车—轨道结构耦合系统动力学性能进行仿真研究,对比分析这2种类型的轨道结构系统振动响应与系统振动传递函数,评价浮置板式轨道结构的隔振效果。分析结果表明,浮置板式轨道结构与普通碎石道床轨道结构相比,振动加速度降低约70%,距线路5 m处大地振动加速度响应峰值降低约62.8%,相应Z振级衰减约10 dB,竖向振动加速度频率范围由0~200 Hz降到0~60 Hz,有效起到了振动隔离效果。     

铁道机车风笛声学性能试验研究

针对鸣笛噪声对铁路沿线和附近居民以及铁路工作人员带来严重干扰的问题,将JA型风笛与现有的风笛进行了对比,结合标准对JA型风笛进行了现场试验和声学性能分析,为提供既能满足险情信号的要求又能符合环保要求的设备提供了参考。     

"中华之星"高速列车信息显示系统

针对“中华之星”高速列车的控制与网络系统结构的特点和要求，设计开发了以嵌入式操作系统WinCE．net为核心的智能显示单元(IDU)．具有全新的数据交换方式和显示方式，还介绍了机车显示系统设计及提高系统性能的方法．使之更稳定高速地运行。     

高中速客专和高低速客货共线铁路不同坡段组合的动力学性能之比较研究

本文运用车辆-轨道耦合动力学新理论,仿真计算了列车以不同速度匹配通过不同类型纵断面时动力学性能的各项指标,并且根据现行铁道机车车辆动力学性能评定规范加以评价。结果表明:在本文设定的不同类型纵断面条件下,如单面坡划为多坡段或凹型坡加设分坡平段或凸型坡加设分坡平段,无论是高中速客车还是高低速客货混跑,采用新设计方案计算得到的指标略大于采用原设计方案得到的相应值,但差异不明显;所有方案下,除个别指标外,安全性指标均未超过合格限值,平稳性指标属优良等级。     

船体外板鞍形板自重成型的数学模型

应用弹性力学壳体理论分析和ANSYS软件数值模拟,对船体鞍形外板在自重作用下引起的变形进行计算,在此基础上应用逐步回归方法建立了鞍形板自重成型的数学模型.