全回转起重船多系统耦合运动响应仿真分析

根据运动学基本原理,计入船-吊物、船-锚链耦合影响以及起重船自身受到的外环境载荷,建立船舶多系统运动模型。利用MATLAB/Simulink软件进行仿真,对多系统耦合作用下的船舶运动进行数值分析。分别在不同的遭遇浪向角和不同的吊臂回转角下,对船舶在各自由度上的位移进行比较,得到其对船舶运动参数的影响规律。结果表明:起重船运动过程中因计入多系统耦合影响,自身运动也表现出更为符合实际的运动特性,为准确预报全回转起重船多系统的运动响应提供了更为科学的理论依据。     

可变截面涡轮增压瞬态性能仿真研究

为研究可变截面涡轮喷嘴开度对发动机的性能影响,建立GT-power和MATLB/Simulink联合仿真模型。采用GT-power软件建立的TBD234V12可变截面涡轮增压柴油机仿真模型研究发动机稳态性能,联合MATLB/Simulink软件建立的可变截面涡轮增压柴油机控制模型,对发动机瞬态性能进行仿真计算。结果表明:在发动机瞬态工况下,可变截面涡轮增压系统可以明显改善常规增压柴油机的动力性、经济性和动态响应特性,并且有效降低增压柴油机的时滞性,涡轮迟滞时间的降幅约为30%。     

Mechanism of Tunnel Water Inflow Caused by Bending Failure of a Waterproof Dike Based on a Circular Thin Plate Mechanical Model北大核心CSCD

Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Emission rates of intermodal rail/road and road-only transportation in Europe: A comprehensive simulation study

Intermodal rail/road transportation combines advantages of both modes of transport and is often seen as an effective approach for reducing the environmental impact of freight transportation. This is because it is often expected that rail transportation emits less greenhouse gases than road transportation. However, the actual emissions of both modes of transport depend on various factors like vehicle type, traction type, fuel emission factors, payload utilization, slope profile or traffic conditions. Still, comprehensive experimental results for estimating emission rates from heavy and voluminous goods in large-scale transportation systems are hardly available so far. This study describes an intermodal rail/road network model that covers the majority of European countries. Using this network model, we estimate emission rates with a mesoscopic model within and between the considered countries by conducting a large-scale simulation of road-only transports and intermodal transports. We show that there are high variations of emission rates for both road-only transportation and intermodal rail/road transportation over the different transport relations in Europe. We found that intermodal routing is more eco-friendly than road-only routing for more than 90% of the simulated shipments. Again, this value varies strongly among country pairs.     

Situation analysis forecasting: the case of European maritime clusters

Within the literature concerned with aspects of competitiveness, innovation and strategic management of industrial clusters, the body regarding forecasting of strategic management is still nascent. This work aspires to render a contribution within the domain of strategic management forecasting, through the indicative case of European maritime clusters. For this end, a two-tier model is formulated. A quantitative strengths, weaknesses, opportunities, and threats (SWOT) methodology that derives from the fusion of a quondam situation analysis and crosstabs’ theory is generated. This leads to the utilization of the crosstab’s conditional probabilities as transition probabilities; the latter are called to compile the transition matrix of a Markov chain. Through this methodology, and the successive Markov chain’s transition matrices, strategic forecasts are extracted for a devised European maritime cluster case. This work relinquishes a novel application with respect to strategic management forecasting, that provides a dichotomy of practical interpretations and scenarios for quantitative situation analysis. Thus, it may enable effective real-time decision-making for strategic management and/or policy drafting. The situation analysis forecasting model may find applicability in a plethora of practical and theoretical cases, wherein forecasting may be desirable. It may as well pertain to an intrinsic methodology for situation analysis forecasting of maritime clusters.     

Genetics of traffic assignment models for strategic transport planning

This paper presents a review and classification of traffic assignment models for strategic transport planning purposes by using concepts analogous to genetics in biology. Traffic assignment models share the same theoretical framework (DNA), but differ in capability (genes). We argue that all traffic assignment models can be described by three genes. The first gene determines the spatial capability (unrestricted, capacity restrained, capacity constrained, and capacity and storage constrained) described by four spatial assumptions (shape of the fundamental diagram, capacity constraints, storage constraints, and turn flow restrictions). The second gene determines the temporal capability (static, semi-dynamic, and dynamic) described by three temporal assumptions (wave speeds, vehicle propagation speeds, and residual traffic transfer). The third gene determines the behavioural capability (all-or-nothing, one shot, and equilibrium) described by two behavioural assumptions (decision-making and travel time consideration). This classification provides a deeper understanding of the often implicit assumptions made in traffic assignment models described in the literature. It further allows for comparing different models in terms of functionality, and paves the way for developing novel traffic assignment models.     

Assessing the impact of reduced visibility on traffic crash risk using microscopic data and surrogate safety measures

Due to the difficulty of obtaining accurate real-time visibility and vehicle based traffic data at the same time, there are only few research studies that addressed the impact of reduced visibility on traffic crash risk. This research was conducted based on a new visibility detection system by mounting visibility sensor arrays combined with adaptive learning modules to provide more accurate visibility detections. The vehicle-based detector, Wavetronix SmartSensor HD, was installed at the same place to collect traffic data. Reduced visibility due to fog were selected and analyzed by comparing them with clear cases to identify the differences based on several surrogate measures of safety under different visibility classes. Moreover, vehicles were divided into different types and the vehicles in different lanes were compared in order to identify whether the impact of reduced visibility due to fog on traffic crash risk varies depending on vehicle types and lanes. Log-Inverse Gaussian regression modeling was then applied to explore the relationship between time to collision and visibility together with other traffic parameters. Based on the accurate visibility and traffic data collected by the new visibility and traffic detection system, it was concluded that reduced visibility would significantly increase the traffic crash risk especially rear-end crashes and the impact on crash risk was different for different vehicle types and for different lanes. The results would be helpful to understand the change in traffic crash risk and crash contributing factors under fog conditions. We suggest implementing the algorithms in real-time and augmenting it with ITS measures such as VSL and DMS to reduce crash risk.     

Intermodal transport in freight distribution: a literature review

There has been significant growth in research on intermodal transport in freight distribution since the 1990s. Differentiating itself from previously published literature reviews, this paper evaluates the current state of this research using Systematic Literature Review methodology. The complementary aims are: (a) to identify the research lines developed and to propose a criterion for classifying the literature, and (b) to discuss the empirical evidence that identifies existing interrelationships. The analysis has enabled three main lines of research to be identified. The first research line, basic principles of intermodal transport, groups together works related to the definition of intermodal transport and the results obtained using this transportation system. The second, improvements to the way that intermodal transport systems work, frames elements and variables that impact intermodal transport systems’ logistics efficiency, such as quality of service, information and communication systems, and freight planning and linkages among system operators to provide an adequate service. Finally, the third line, intermodal transport system modelling, identifies the main variables used to optimise these transport systems, the different focuses and approaches used in modelling, and the advantages and disadvantages of each focus. These research lines take in more specific sublines that incorporate articles that develop related research questions. Lastly, the discussion of the content of each of these research sublines enables us to identify gaps in the literature and comment on directions for future research.     

Long-term impact of the Shinkansen on rail and air demand: analysis with data from Northeast Japan

This paper analyses how the high-speed rail construction in Northeast Japan (Tohoku) has affected total demand and interregional travel patterns. We use annual interregional passenger data from 1989 to 2012 and apply regression analysis with the demand between Tokyo and the Tohoku prefectures as the dependent variable. We distinguish particularly between the ‘Full-’ and the ‘Mini-’ Shinkansen, where the latter are branch services running with reduced speed. We find that the ‘Full-Shinkansen’ quickly increases rail and total public transport trips and generates additional rail demand year on year. The ‘Mini-Shinkansen’ impacts are less pronounced. Furthermore, our analysis shows that the Shinkansen has shifted some demand from air to rail once it started operation and increased rail share gradually. We therefore suggest that predictions of demand impacts should carefully distinguish immediate from gradual impacts. We also discuss differences in regional demand in that not all prefectures have gained equally from Shinkansen construction.