新建地铁车站零距离下穿既有线区间影响分析

暗挖隧道下穿既有地铁施工,势必会引起既有地铁结构附加变形和差异沉降,影响其结构及运营安全,需要进行变形和内力分析,以便采取必要保护措施.文章以某暗挖车站密贴下穿既有地铁区间为例,采用FLAC3D和SAP 2000模拟,分析既有地铁区间变形和内力发展规律,评价结构和运营安全受影响的程度,为安全保护提供决策依据.     

Hybrid model for prediction of bus arrival times at next station

Effective prediction of bus arrival times is important to advanced traveler information systems (ATIS). Here a hybrid model, based on support vector machine (SVM) and Kalman filtering technique, is presented to predict bus arrival times. In the model, the SVM model predicts the baseline travel times on the basic of historical trips occurring data at given time‐of‐day, weather conditions, route segment, the travel times on the current segment, and the latest travel times on the predicted segment; the Kalman filtering‐based dynamic algorithm uses the latest bus arrival information, together with estimated baseline travel times, to predict arrival times at the next point. The predicted bus arrival times are examined by data of bus no. 7 in a satellite town of Dalian in China. Results show that the hybrid model proposed in this paper is feasible and applicable in bus arrival time forecasting area, and generally provides better performance than artificial neural network (ANN)–based methods. Copyright © 2010 John Wiley & Sons, Ltd.     

沉管隧道地震响应分析

文章采用田村重四郎和冈本舜三提出的沉埋隧道地震响应分析的数学模型,对南京长江越江隧道(沉管段)方案进行了地震响应的纵向受力分析。分析中采用了隧址处100年超越概率为2%的人工合成地震加速度,考虑了不同管段的联结方式和不同的计算参数,对初步设计中沉管段结构的安全性进行了论证,所提供的数据曾为设计单位所采纳[1]。     

从河床冲淤分析沉管法修建长江水下隧道问题

文章从三峡水库泥沙入库量的减少以及三峡水库对泥沙的拦截作用两个方面分析了三峡水库对长江中下游河床冲刷的影响,具体剖析了现有冲刷数值模拟的最大冲刷量远较实际冲刷量为小的原因,因此得出了在三峡以下长江中下游不宜采用沉管法修建长江水下隧道的结论。对于重庆地区朝天门两江隧道的修建方案问题,文章在分析了决定修建沉管隧道方案可行性的两个关键参数,即河床水深和水流流速后,指出只要采取相应工程措施,采用沉管法修建两江隧道是可行的。     

清管器在输油管道中的运动规律研究

在分析清管物理模型的基础上,建立了清管器前段塞流动的特征参数计算模型、动态数学模型以及相应的数值计算方法,并进行了数值模拟。利用数学模拟方法可以计算清管过程中管线的压力分布,利用压力分布可以跟踪清管球在管线内的运行,这为混输管路的运行管理提供了理论依据。     

下穿既有公路的土江冲隧道双层管棚设计及监测分析

位于常—吉高速公路上的土江冲隧道是一座下穿既有公路的四车道连拱隧道,施工中为了控制地面沉降,在洞口段采用双层管棚作为辅助施工方法,保证了隧道施工安全和319国道的畅通;在隧道开挖过程中,掌子面附近的管棚变形最大,隧道开挖纵向影响范围为1.5~2.0倍开挖高度。文章介绍了管棚设计、施工情况和监测结果。     

On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Structural Optimization and Strength Analysis of the Lifting Arm of a Wet Shotcrete Spraying Unit北大核心CSCD

Wet shotcrete spraying units are widely used in underground engineering, for railways, highways, water conservancy and hydropower stations, municipal works, mining and military and other industries. Structural analysis and mechanical behavior optimization are conducted regarding the lifting arm of a TKJ series shotcrete spraying unit, and optimization of the hinge point position and working scope of the lifting arm is realized. The optimal layout scheme for the hinge force is given based on the Monte Carlo method, the hinge force of the lifting arm is improved for the mean and maximum values, and the maximum and average hinge force of the lifting cylinder decrease by 23.14% and 7.70%, respectively, compared with that of the original scheme. The static strength is checked using Ansys-Workbench for the optimized scheme, and the results show that the optimized scheme has a larger safety re-serve and that the structural design is more reasonable than the original scheme. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

快速公交系统站台停靠时间模型研究

快速公交系统停靠站台停车延误是影响快速公交运行车速的关键因素之一,因此构建快速公交系统站台停靠时间模型是提升快速公交服务水平的基础理论研究。本文选取盐城BRT-1号线的起始站、中途站、客流离散站等三类站点为研究对象,综合运用数理统计法与数据挖掘法,构建快速公交系统站台停靠时间模型,并对该模型的合理性进行了检验。研究表明:盐城市BRT-1号线三类站台的快速公交车辆停靠时间与上下车乘客人数呈线性关系,即快速公交车辆停靠时间与上下车乘客人数的检验参数R2均大于0.8。     

A macroscopic theory for unsignalized intersections

The following paper presents a dynamic macroscopic model for unsignalized intersections which accounts for time-limited disruptions in the minor stream flow, even in free-flow conditions when the average flow demand is satisfied. It introduces a deterministic fictive traffic light to represent an average alternating sequence of available and busy time periods for insertion depending on the major stream flow. Two allocation schemes of the total outflow during green periods are developed to model the influence or non-influence of the minor stream over the major stream flow. The aggregation of the resulting dynamic flow variations gives relevant capacity values. Moreover, the model predicts accurate average vehicle delay and queue length estimates compared to theoretical and empirical data. It has three easy-to-measure parameters and can be integrated into a dynamic macroscopic simulation tool for urban networks.