基于车辆自动定位数据的有轨电车运行效率分析与应用

结合有轨电车线路的现有车辆自动定位数据,分析有轨电车运行效率及其相关影响因素。其中,影响因素从站台、路段、交叉口3个方面进行考虑。定性分析了不同站台型式、站台位置、交叉口类型的属性特征,并量化不同路段的路段长度、所包含的交叉口个数,同时考虑了交叉口控制策略对有轨电车运行时间的影响。以某已运营的有轨电车线路为例,通过建立多元线性回归模型,从不同层面探究不同因素对已运营有轨电车线路运行效率的影响。最后用模型对有轨电车新建线路的运行效率进行预测,并提出建议。     

GPS动态定位中自适应卡尔曼滤波模型的建立及其算法研究

采用描述机动载体运动的“当前”统计模型，建立了一种新的ＧＰＳ动态定位自适应卡尔曼滤波模型。为了进一步提高滤波器的动态性能，提出一种改进的自适应滤波算法，大大提高了ＧＰＳ动态定位卡尔曼滤波器的跟踪能力，改善了滤波效果。计算机仿真结果验证了该算法的有效性。     

现代船舶动力定位系统设计

围绕现代动力定位系统的设计问题,讨论系统的构建、数学建模、控制器设计和推力器的推力分配,重点给出了基于扩展Kalman滤波的动力定位LQG控制器设计算法。     

作动器故障时摆式电动车组受电弓主动倾摆控制系统的自动容错控制方法

通过分析摆式电动车组受电弓主动倾摆控制系统的结构和工作原理,建立其状态方程和非完全失效故障情况下作动器模型.考虑到倾摆控制系统参数和作动器故障的不确定性,采用基于参考模型的自适应容错控制策略,通过将故障作动器损失的驱动力平均分配给其他无故障的作动器,实现作动器驱动力的重组.以某摆式电动车组的受电弓主动倾摆控制系统作动器发生故障为例,对电动车组以120km·h-1速度通过半径为800m的圆曲线线路时的容错控制进行仿真研究.结果表明;倾摆控制系统能够跟踪给定的参数输出并使状态跟踪误差迅速收敛为0,基于自适应容错控制技术设计的自适应故障补偿控制器能够有效实现部分作动器故障后作动器驱动力的重组,表明给出的自适应容错控制方法完全适用于摆式电动车组受电弓主动倾摆控制系统的不确定性运行环境.     

AS-900HL多平台激光雷达测量系统在河道地形测量中的应用

数字城市的发展对基础数据提出更高的要求,获取地表三维空间信息的需求日渐增加。AS-900HL多平台激光雷达测量系统是一种集成高精度激光扫描仪与惯性导航的系统,可搭载在多种平台进行数据采集,具有工作效率高、扫描速度快、测点密度大、成果形式多样等特点。以鸭绿江白马浪至云峰大坝段河道地形测量为实例,对AS-900HL在河道地形测量的应用进行探讨。该河段地形高低起伏巨大,不具备直接接触测量的条件,由于对岸是朝鲜,无法登陆架设远程测量设备,也不能采用无人机航飞,属于实施难度很大的特殊河段。通过踏勘、路线设计、外业采集、内业处理和成果输出,验证了该系统在河道地形测量中的可行性。该系统适用于河道地形测量,尤其在特殊困难河段,能填补常规测量技术无法施测的空缺,可推动数字航道和数字城市建设。     

动车组车轮多边形机理分析

介绍了高速动车组车轮多边形的形成机理以及与转向架结构之间的关系。转向架一系悬挂和定位结构不同,在动车组运行过程中对转向架固定轴距的影响也不同。当采用转臂定位结构时,由于一系钢弹簧的沉浮运动,使车轮在钢轨方向产生有规律的微小滑动,造成车轮多边形磨耗。     

基于多旅行商问题的应急设施服务区划分模型

基于多旅行商问题，增设集散中心需求及应急服务设施资源容量约束条件，以最小化遍历区域内全部集散中心的综合旅行时间成本为优化目标，构建一种应急设施服务区划分模型，确定各应急设施的服务区范围.设计一种复合算法求解模型，首先基于P-中值选址模型的优化理念，形成初始方案；继而加入禁忌搜索算法，结合LKH求解器对模型进行迭代优化求得最优解.基于宁波市北仑区实际拓扑网络进行案例分析，验证了模型和求解方法的有效性.     

A generic data assimilation framework for vehicle trajectory reconstruction on signalized urban arterials using particle filters

With trajectory data, a complete microscopic and macroscopic picture of traffic flow operations can be obtained. However, trajectory data are difficult to observe over large spatiotemporal regions—particularly in urban contexts—due to practical, technical and financial constraints. The next best thing is to estimate plausible trajectories from whatever data are available. This paper presents a generic data assimilation framework to reconstruct such plausible trajectories on signalized urban arterials using microscopic traffic flow models and data from loops (individual vehicle passages and thus vehicle counts); traffic control data; and (sparse) travel time measurements from whatever source available. The key problem we address is that loops suffer from miss- and over-counts, which result in unbounded errors in vehicle accumulations, rendering trajectory reconstruction highly problematic. Our framework solves this problem in two ways. First, we correct the systematic error in vehicle accumulation by fusing the counts with sparsely available travel times. Second, the proposed framework uses particle filtering and an innovative hierarchical resampling scheme, which effectively integrates over the remaining error distribution, resulting in plausible trajectories. The proposed data assimilation framework is tested and validated using simulated data. Experiments and an extensive sensitivity analysis show that the proposed method is robust to errors both in the model and in the measurements, and provides good estimations for vehicle accumulation and vehicle trajectories with moderate sensor quality. The framework does not impose restrictions on the type of microscopic models used and can be naturally extended to include and estimate additional trajectory attributes such as destination and path, given data are available for assimilation.     

基于信令数据的出行强度影响因素分析模型

为探究城市交通出行强度影响因素及不同因素的影响程度，本文从土地利用与交通基础设施建设两方面出发，分析包括土地利用混合指数，职住混合率熵指数，公共交通站点 500 m覆盖率，路网可达性等17个指标与出行强度的相关关系；基于相关系数和拟合优度分析，提取7个与出行强度强相关指标，基于所识别指标构建北京市中心城区出行强度多元回归模型.模型结果表明，职住混合率熵指数对出行强度的影响最为显著，公共交通站点覆盖率对出行强度的影响比道路网密度和可达性更为明显.此外，给出单一土地利用/交通基础设施指标对出行强度拟合结果的离群特征分析方法，用于评估不同区域基础设施供给与交通出行需求之间的平衡关系.     

A driver advisory system with dynamic losses for passenger electric multiple units

Driver advisory systems, instructing the driver how to control the train in an energy efficient manner, is one the main tools for minimizing energy consumption in the railway sector. There are many driver advisory systems already available in the market, together with significant literature on the mathematical formulation of the problem. However, much less is published on the development of such mathematical formulations, their implementation in real systems, and on the empirical data from their deployment. Moreover, nearly all the designed driver advisory systems are designed as an additional hardware to be added in drivers’ cabin. This paper discusses the design of a mathematical formulation and optimization approach for such a system, together with its implementation into an Android-based prototype, the results from on-board practical experiments, and experiences from the implementation. The system is based on a more realistic train model where energy calculations take into account dynamic losses in different components of the propulsion system, contrary to previous approaches. The experimental evaluation shows a significant increase in accuracy, as compared to a previous approach. Tests on a double-track section of the Mälaren line in Sweden demonstrates a significant potential for energy saving.