内河船舶波浪载荷研究

利用内河波浪散布图和修订波浪谱对内河系列船舶进行了波浪载荷的计算预报,首次分析了内河船舶波浪载荷的规律和特点,并与俄罗斯内河登记局(RRR)和法国-德国船级社(B-G)的内河规范载荷对应的等效模数要求进行了比较分析。结合实船测试结果表明：波浪载荷变化规律与国外同类规范一致,预报波浪载荷水平与测试结果及国外同类规范要求相当。内河船舶波浪载荷预报应考虑航速和水深的影响,载荷预报结果可以作为制定内河波浪载荷公式的基础。     

双月池对某援潜救生船运动性能及波面升高的影响

介绍某援潜救生船配设双月池的船型特点,规划双月池和不带月池2种方案来评估双月池开口对援潜救生船船体运动性能的影响。采用三维势流理论对2个方案的运动性能进行计算,得到船体运动响应函数,对船舶运动性能进行短期预报,研究总结双月池效应对援潜救生船运动的影响规律。对比双月池内水面和舷外波面升高的情况,比较两个位置处波面升高的差异性,总结双月池波面升高对潜水钟收放的影响。     

半透空沉箱式防波堤的消波性能试验研究

提出一种新型防波堤——半透空沉箱式防波堤。在玻璃水槽中进行系列水工模型试验,量测在不同波高、周期波浪作用下,半透空沉箱防波堤前后的波浪特征参数,分析半透空沉箱防波堤对不同特征波浪的反射率,波浪周期与波浪尖锐度之关系。探讨该防波堤结构的消波原理与性能,根据试验分析结果,选出最优的透空率及内置斜坡坡度,试验结论可为开敞式港区码头的防波消波方案设计与规划提供一种新思路。     

透空式防波堤透浪的数值模拟

基于FLUENT求解器,以N-S方程为控制方程,采用动量源方法及追踪自由面的VOF方法,建立了同时具有造波和消波功能的数值波浪水槽。利用该数值水槽对透空堤的透浪、越浪问题进行数值模拟,并与物理模型试验进行比较,结果表明:数值模拟能较好地复演防波堤越浪、透浪过程。     

多体浮式防波堤消波特性数值模拟

多体浮式防波堤消波特性是决定其应用价值的重要因素,基于三维势流理论,通过使用Ansys Workbench软件和AQWA Graphical Supervisor(AGS)图像后处理软件,对多体浮式防波堤在不同入射角和浮筒吃水深度下的消波效果展开研究。结果表明,在入射角度为90°时,多浮筒浮式防波堤能够最大程度地消减波浪。同时,透射系数随吃水深度的增加而不断减小,但结构稳定性会下降。因此,实际工程中应尽量保证浮式防波堤的迎浪面与波浪的来波方向垂直,这样可以获得较好的消波效果,同时应尽量避免选择吃水深度过大的浮式防波堤。     

Effect of Explosion in a Gas Pipeline Compartment of a Utility Tunnel on Neighboring Metro Tunnels北大核心CSCD

In this paper the numerical simulation analysis of the effect of explosion in the gas pipeline compartment of a utility tunnel on neighboring metro tunnels was conducted using the software AUTODYN. The results show that the TNT equivalent in a fireproof partition with length of 200 m is 41.6 kg when the gas concentration in the gas pipeline compartment reaches 10%; the blast wave has much effect on the crown and arch waist of the round metro tunnel and it’s necessary to take some protective measures in both areas; when the surrounding soil is sand, the utili- ty tunnel is above the round metro tunnel and their alignments are in the same direction, the greater the vertical spacing between the utility tunnel and the metro tunnel, the smaller the effect of the blast wave on the metro tunnel; when the vertical spacing is 7.2 m, the maximum dynamic tensile stress is 1.86 MPa (including the static stress value of 1 MPa in the tunnel segment) and it is slightly smaller than the designed tensile strength of metro tunnel (about 1.89 MPa). The maximum vibration velocity and the maximum displacement meet the structural stability require- ments, so it is suggested the vertical spacing between the utility tunnel and metro tunnel shall not be less than 7.2 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Soil Body Deformation Caused by Construction of a Double-Line Shield Tunnel with Multiple Factors北大核心CSCD

Considering the influence of many factors (soil loss, frontal additional thrust, the friction force of the shield shell and the additional grouting force), a method for improving the uniform soil body movement model is pro-posed, and a mechanical calculation model is established to study the calculation method for soil body deformation caused by double-line parallel shield driving. Based on the Mindlin solutions of elastic mechanics, the theoretical solutions for soil body deformations caused by the last three factors are calculated; considering the uniform soil body movement model, the theoretical solutions for soil body deformations caused by soil loss are calculated, then the to-tal theoretical solutions for soil body deformations under multiple factors are obtained by means of superposition. The vertical surface settlement, vertical horizontal displacement, and vertical displacements of the soil body at different depths of Hangzhou Metro Line 1 are calculated to analyze the variation laws. Meanwhile the influential factors for horizontal displacement variation are studied. The research shows that with a change of depth, the settlement of the soil body changes within the scope of 10 to 13 m in the horizontal direction near where the maximum settlement occurs;the direction of the horizontal displacement of the soil body changes with a change of the positional relationship be-tween the calculation points and the tunnel; and with an increase of interval J for the two tunnels, the horizontal dis-placement of the soil body of a deep double-line tunnel decreases while the displacement near the surface changes slightly. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

整体推进式桩基码头结构设计与施工

针对在拉美和非洲地区部分码头建设中,存在大型船机设备缺乏和长周期波较为明显、常规打桩船作业和预制构件安装困难的问题,基于一般桩基码头结构,在设计和施工两个方面进行优化,采用桩顶施工行走平台方法施工,利用桩基自身作为支撑结构,大量采用叠合式上部结构,实现将海上施工转化为陆上施工的创新,形成整体推进式桩基码头结构,规避大型船机设备缺乏和长周期波较为明显的问题,具有良好的经济性和对强震区的适应性。     

不规则波作用下的港域波浪条件试验研究

针对数学模型很少能较好地模拟天然海浪的多向性、不规则性的特点,基于港口波浪整体物理模型试验,对不规则波作用下港域内测点的波高扰动系数的分布规律进行研究。结果表明:在绕射作用为主的掩护区域,多向波的绕射性能大于单向波,波浪扰动系数较大;波浪绕射、反射作用均十分强烈的掩护区域,多向不规则波与单向不规则波的扰动系数看不出明显的大小关系。以反射作用为主的掩护良好区域,单向不规则波的扰动系数较多向不规则波的要大,且受反射作用越大的区域,单向波的扰动系数大的越多。在以绕射作用为主的掩护区域,波浪分布对周期的敏感性较差;在以反射作用为主的掩护良好区域,波高分布对周期的敏感性较强。在绕射、反射都较强的情况下有可能单向波作用下的港内波高大于单向波,用单向不规则波来模拟反而是偏安全的。在进行港内波况整体模型试验时需要根据实际的工程条件做出综合考虑来决定波型,必要时要对单向、多向不规则波都要进行试验以确定最佳方案。     

Mike21软件桩群概化方法在高桩码头中的应用

码头前沿水域的横流过大容易导致船舶撞击码头或系船缆绳断裂,进而引发安全事故,因此研究码头前沿水域的流场状况对码头轴线合理选取和船舶的安全靠泊有着非常重要的意义。基于桩群概化方法,采用Mike21软件中的三角形网格水动力模块(FM模块)对曹妃甸矿石一期、矿石三期高桩码头附近的流场进行了数值模拟,并与现场实测流速、流向进行对比验证,确定了模型中的桩群影响参数。在此基础上,深入研究相邻高桩码头桩群阻力对周边海域的影响,并对码头前横流进行计算和分析。此方法实施简单、计算效率高,对大范围海域影响研究结果合理,对高桩码头前沿水域有关流速、流向的计算结果更加准确,对码头轴线合理选取和船舶安全靠泊有重要的参考意义。