Predicting the adoption of connected autonomous vehicles: A new approach based on the theory of diffusion of innovations

On the grounds that individuals heavily rely on the information that they receive from their peers when evaluating adoption of a radical innovation, this paper proposes a new approach to forecast long-term adoption of connected autonomous vehicles (CAVs). The concept of resistance is employed to explain why individuals typically tend to defer the adoption of an innovation. We assume that there exists a social network among individuals through which they communicate based on certain frequencies. In addition, individuals can be subject to media advertisement based on certain frequencies. An individual’s perceptions are dynamic and change over time as the individual is exposed to advertisement and communicates with satisfied and dissatisfied adopters. We also explicitly allow willingness-to-pay (WTP) to change as a result of peer-to-peer communication. An individual decides to adopt when (i) there is a need for a new vehicles; (ii) his/her WTP is greater than CAV price; and (iii) his/her overall impression about CAVs reaches a cutoff value. Applicability of the proposed approach is shown using a survey of employees of the University of Memphis. Our results show that the automobile fleet will be near homogenous in about 2050 only if CAV prices decrease at an annual rate of 15% or 20%. We find that a 6-month pre-introduction marketing campaign may have no significant impact on adoption trend. Marketing is shown to ignite CAV diffusion but its effect is capped. CAV market share will be close to 100% only if all adopters are satisfied with their purchases; therefore, the probability that an individual becomes a satisfied adopter plays an important role in the trend of adoption. The effect of the latter probability is more pronounced as time goes by and is also more prominent when CAV price reduces at greater rates. Some caveats may be inserted when considering the study results as the findings are subject to sample bias and data limitations.     

Capturing correlation with a mixed recursive logit model for activity-travel scheduling

Representing activity-travel scheduling decisions as path choices in a time–space network is an emerging approach in the literature. In this paper, we model choices of activity, location, timing and transport mode using such an approach and seek to estimate utility parameters of recursive logit models. Relaxing the independence from irrelevant alternatives (IIA) property of the logit model in this setting raises a number of challenges. First, overlap in the network may not fully characterize perceptual correlation between paths, due to their interpretation as activity schedules. Second, the large number of states that are needed to represent all possible locations, times and activity combinations imposes major computational challenges to estimate the model. We combine recent methodological developments to build on previous work by Blom Västberg et al. (2016) and allow to model complex and realistic correlation patterns in this type of network. We use sampled choices sets in order to estimate a mixed recursive logit model in reasonable time for large-scale, dense time-space networks. Importantly, the model retains the advantage of fast predictions without sampling choice sets. In addition to estimation results, we present an extensive empirical analysis which highlights the different substitution patterns when the IIA property is relaxed, and a cross-validation study which confirms improved out-of-sample fit.     

System energy optimisation strategies for metros with regeneration

Energy and environmental sustainability in transportation are becoming ever more important. In Europe, the transportation sector is responsible for about 30% of the final end use of energy. Electrified railway systems play an important role in contributing to the reduction of energy usage and CO₂ emissions compared with other transport modes. For metro-transit systems with frequently motoring and braking trains, the effective use of regenerated braking energy is a significant way to reduce the net energy consumption. Although eco-driving strategies have been studied for some time, a comprehensive understanding of how regeneration affects the overall system energy consumption has not been developed. This paper proposes a multi-train traction power network modelling method to determine the system energy flow of the railway system with regenerating braking trains. The initial results show that minimising traction energy use is not the same as minimising the system energy usage in a metro system. An integrated optimisation method is proposed to solve the system energy-saving problem, which takes train movement and electrical power flow into consideration. The results of a study of the Beijing Yizhuang metro line indicate that optimised operation could reduce the energy consumption at the substations by nearly 38.6% compared to that used with the existing ATO operation.     

Large-scale dynamic transportation network simulation: A space-time-event parallel computing approach

This paper describes a computationally efficient parallel-computing framework for mesoscopic transportation simulation on large-scale networks. By introducing an overall data structure for mesoscopic dynamic transportation simulation, we discuss a set of implementation issues for enabling flexible parallel computing on a multi-core shared memory architecture. First, we embed an event-based simulation logic to implement a simplified kinematic wave model and reduce simulation overhead. Second, we present a space-time-event computing framework to decompose simulation steps to reduce communication overhead in parallel execution and an OpenMP-based space-time-processor implementation method that is used to automate task partition tasks. According to the spatial and temporal attributes, various types of simulation events are mapped to independent logical processes that can concurrently execute their procedures while maintaining good load balance. We propose a synchronous space-parallel simulation strategy to dynamically assign the logical processes to different threads. The proposed method is then applied to simulate large-scale, real-world networks to examine the computational efficiency under different numbers of CPU threads. Numerical experiments demonstrate that the implemented parallel computing algorithm can significantly improve the computational efficiency and it can reach up to a speedup of 10 on a workstation with 32 computing threads.     

Tradable network permits: A new scheme for the most efficient use of network capacity

Akamatsu et al. (2006) proposed a new transportation demand management scheme called “tradable bottleneck permits” (TBP), and proved its efficiency properties for a single bottleneck model. This paper explores the properties of a TBP system for general networks. An equilibrium model is first constructed to describe the states under the TBP system with a single OD pair. It is proved that equilibrium resource allocation is efficient in the sense that the total transportation cost in a network is minimized. It is also shown that the “self-financing principle” holds for the TBP system. Furthermore, theoretical relationships between TBP and congestion pricing (CP) are discussed. It is demonstrated that TBP has definite advantages over CP when demand information is not perfect, whereas both TBP and CP are equivalent for the perfect information case. Finally, it is shown that the efficiency result also holds for more general demand conditions.     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

A new logit‐artificial neural network ensemble for mode choice modeling: a case study for border transport

Logit model is one of the statistical techniques commonly used for mode choice modeling, while artificial neural network (ANN) is a very popular type of artificial intelligence technique used for mode choice modeling. Ensemble learning has evolved to be very effective approach to enhance the performance for many applications through integration of different models. In spite of this advantage, the use of ANN‐based ensembles in mode choice modeling is under explored. The focus of this study is to investigate the use of aforementioned techniques for different number of transportation modes and predictor variables. This study proposes a logit‐ANN ensemble for mode choice modeling and investigates its efficiency in different situations. Travel between Khobar‐Dammam metropolitan area of Saudi Arabia and Kingdom of Bahrain is selected for mode choice modeling. The travel on this route can be performed mainly by air travel or private vehicle through King Fahd causeway. The results show that the proposed ensemble gives consistently better accuracies than single models for multinomial choice problems irrespective of number of input variables. Copyright © 2015 John Wiley & Sons, Ltd.     

Prioritizing road extension projects with interdependent benefits under time constraint

Since transportation projects are costly and resources are limited, prioritizing or sequencing the projects is imperative. This study was inspired by a client who asked: “I have tens of approved road extension projects, but my financial resources are limited. I cannot construct all the projects simultaneously, so can you help me prioritize my projects?” To address this question, the benefits and costs of all the possible scenarios must be known. However, the impacts (or benefit) of road extension projects are highly interdependent, and in sizable cases cannot be specified thoroughly. We demonstrate that the problem is analogous to the Traveling Salesman Problem (TSP). Dynamic change in travel demand during construction is another aspect of the complexity of the problem. The literature is yet to provide efficient methods for large cases. To this end, we developed a heuristic methodology in which the variation of travel demand during the construction period is considered. We introduce a geometrical objective function for which a solution-finding policy based on “gradient maximization” is developed. To address the projects’ interdependency, a special neural network (NN) model was devised. We developed a search engine hybridized of Ant Colony and Genetic Algorithm to seek a solution to the TSP-like problem on the NN based on gradient maximization. The algorithm was calibrated and applied to real data from the city of Winnipeg, Canada, as well as two cases based on Sioux-Falls. The results were reliable and identification of the optimum solution was achievable within acceptable computational time.     

Competitiveness of container terminal operating companies in South Korea and the industry–university–government network

Burgeoning container port facilities have fostered intensified competition among container terminal operating companies (CTOCs). However, despite research into their survival strategies which identified antecedents of competitiveness including hard factors such as facilities, available cargo and cargo processing ability, softer factors spanning human resource management, networks and strategic alliances with universities and government agencies in industry–university–government (I–U–G) networks have been overlooked. This study aims to examine both hard and softer antecedents of competitiveness as perceived by 152 professionals in South Korean CTOCs; empirical relationships among these antecedents, I–U–G networks, and competitiveness itself; and the significance of the I–U–G network in establishing and improving competitiveness. Posited antecedents of competitiveness included human resources, facilities, service quality, customer orientation, reputation, and government support policy as independent variables; the I–U–G network as a moderating variable; and competitiveness as a dependent variable. Empirical structural relationships revealed that excepting government support policy, each variable significantly affected CTOC competitiveness. Further, the I–U–G network moderated the relationships between the antecedents of competitiveness and competitiveness. Because an effective I–U–G network was pivotal in controlling CTOC competitiveness, improved competitiveness requires not only differentiation of human resources, facilities, service quality, customer orientation, and reputation factors but also I–U–G network developments.     

基于VRML的虚拟现实技术在数字管道中的应用

介绍了虚拟现实建模语言(VRML),将基于VRML的虚拟现实技术和HTML、 JavaScript相结合,并应用到数字管道中,构建了真实感强、交互性强的可视化虚拟石油管道场景和管道泄漏模型,实现了石油管道虚拟场景的漫游,以及用户与虚拟场景的交互,并及时、直观地反映管道泄漏.应用结果表明:将基于VRML的网络交互式虚拟现实技术应用到数字管道,促进了数字管道的信息共享,提高了数字管道的决策管理效率.