新建结构与运营地铁车站接驳关键技术

以深圳地铁新建3号线老街站换乘综合体与运营地铁车站接驳工程为实例,对运营车站临时加固防护、分部切割既有结构、新旧结构接驳等关键技术展开论述。提出运用金刚石绳锯与金刚石水钻相结合的一种静力切割工艺,很好地解决了该工程作业环境复杂、技术要求高、风险大等难题,安全、高效地完成了新建结构与运营地铁车站接驳工程。     

Weight threshold estimation of falling UAVs (Unmanned Aerial Vehicles) based on impact energy

Different weight thresholds for drone operations have been specified by regulatory agencies in different countries, without detailed backgrounds of guidelines. Therefore, this paper aims to study weight thresholds by focusing different levels of injuries caused by the impact of the drones on human head of different weights dropped at various heights. The work covers drone free drop modelling, FEM (finite element method) based impact modeling, and comparable drop impact experiments. The analyses and experiments were conducted accordingly to two individual commercially-available groups: small and large drones in weights. Two well-established indicators defining head injuries due to impact, which are known as Head Injury Criterion (HIC) and Abbreviated Injury Scale (AIS), are used in the present weight threshold study. The proposed AIS level for the weight threshold estimation has been set at AIS level 3, which indicates major skull fracture, in the further analysis through the probability of fatality. The main focus of the present work is to perform a parametric study and to present a reliable model to estimate the weight thresholds of the drone operations based on HIC and AIS. In conclusion, the results obtained and presented in this paper have demonstrated and provided a comprehensive analysis of possible direct injuries of a falling drone impacting a human head, with relevant data of impact or injury levels associated with HIC and AIS obtained for a drone with different weights falling from various heights.     

基于“1+3”的复合型人才课程体系的探索与实践——以新能源汽车技术专业为例

当前时期,针对复合型人才教学体系的创新,应当有对性地构建起更加完善的人才培养体系,并做好对于学生的专业性知识技能和专业性职业技能优化培养。结合现阶段的新能源汽车技术专业培养,要针对把握性教学标准和教学要求,做好有效性的更新和完善,本文主要结合基于"1+3"的复合型人才课程体系的探索与实践展开了研究分析。     

基于模糊综合评价法的馈能悬架结构方案评价

馈能型悬架是可以回收悬架之间振动能量的新型悬架,研究国内外几种馈能型悬架方案的结构和工作原理,运用模糊综合评价法对馈能型悬架的结构方案进行评价.结果表明液电馈能型悬架方案具有明显的优势,是最可行的馈能型悬架结构方案.     

长江口新一代车客渡船的设计特点

介绍长江口新一代车客渡船的设计特点，包括：节能效果显著的非对称双尾鳍船型；富有个性的新颖船舶外观造型；以及既经济实用又能体现时代气息的舱室装潢设计。     

Network equilibrium models with battery electric vehicles

The limited driving ranges, the scarcity of recharging stations and potentially long battery recharging or swapping time inevitably affect route choices of drivers of battery electric vehicles (BEVs). When traveling between their origins and destinations, this paper assumes that BEV drivers select routes and decide battery recharging plans to minimize their trip times or costs while making sure to complete their trips without running out of charge. With different considerations of flow dependency of energy consumption of BEVs and recharging time, three mathematical models are formulated to describe the resulting network equilibrium flow distributions on regional or metropolitan road networks. Solution algorithms are proposed to solve these models efficiently. Numerical examples are presented to demonstrate the models and solution algorithms.     

隧道铣挖法铣挖参数数值模拟研究

基于PRO/E建立艾卡特ER1500-1XL铣挖头模型导入LS-DYNA中,选择DRUCKER-PRAGER本构模型模拟岩土材料,刚体模拟铣挖头进行铣削岩土仿真。通过数值模拟方法改变隧道铣挖法中铣削参数(吃刀深度,截割厚度,铣挖方式),结合现场资料得到隧道铣挖规律。结果如下:(1)截齿荷载平均值差异不大时差异系数较大是截齿破坏的主要原因;(2)吃刀深度和垂直摆动速度与单位比能耗呈指数关系,加大吃刀深度比摆动速度对加大截割厚度更有效,截割阻力与截割厚度成线性关系;(3)铣挖尽量采用顺切,较为省力,延长截齿寿命。     

结构-电磁激励下某电驱总成噪声控制

针对某电动汽车电驱总成的噪声问题，依据电驱总成车内噪声产生机理，进行整车状态声振特性测试，运用不同工况组合下的频谱特征和阶次特征等分析方法，识别出该电驱总成噪声问题为结构共振和电磁激励所致。针对结构共振问题，考虑电驱总成结构耦合特性、电机材料复杂多样性和线圈绕组质量，建立电驱总成有限元分析模型，求解出电驱总成的模态和振动响应，并通过敲击法模态试验得到模态参数进而对有限元模型进行验证，在此基础上以模态应变能为依据对电驱总成结构的局部刚度进行优化，提升结构共振频率，降低共振风险。针对电磁激励问题，以电驱总成中的永磁同步电机为研究对象，建立电磁仿真分析模型，以影响磁通密度的转子槽口的槽形、槽宽、槽深和槽间角度4个因素建立正交试验设计表，通过极差值得到各因素对齿槽转矩和输出转矩的影响水平，最后以降低齿槽转矩、加工工艺简单和对输出转矩影响小为目标，运用16组具有代表性的电磁方案，完成256个参数组合的寻优，并对优化方案进行了数值仿真计算。研究结果表明：优化方案的改善效果较显著；研究可为电动汽车车内噪声改善提供试验技术支持，并为电驱总成的结构共振噪声和电磁噪声控制提供方法参考。     

“1+X”证书制度下的汽车检测与维修专业“三教”存在问题研究

在教学过程中,"师资,教材,教法"是基本内容,教学质量指标也受到影响。本文以新能汽车检验维修专业为例,对职教二十条进行了分析。职业教育"三教一体化"改革的重要性,同时,针对教师,教材和教学方法等问题提出了切实可行的改革思路,仅供相关人员参考。     

瞬态统计能量分析法中动态响应误差分析

统计能量分析方法能够有效预示舰船和车辆等结构的高频振动及噪声。本文通过建立两子结构耦合模型，利用差分法研究了瞬态统计能量分析中参数误差对子结构响应能量的影响，同时给出了参数误差与所导致能量误差的关系函数。结果表明：对于外载荷直接激励的子结构，内损耗因子和耦合损耗因子的误差都会导致被预示总能量的减小。对于外载荷间接激励的子结构，内损耗因子的误差会导致峰值能量的减小，而耦合损耗因子的误差会导致峰值能量的增加。本文内容对改进动力学系统数值模型以及提高结构振动和噪声预示精度有一定的帮助。