南京地铁3号线浦珠路站满足大直径盾构整体始发结构托换技术研究

为满足南京地铁3号线浦珠路站大直径盾构整体始发的需要,对该站原分体始发结构进行调整。通过分析大直径盾构整体始发技术对地铁车站的影响,总结出地铁车站在大盾构整体始发条件下结构设计的处理方法及难点。根据车站工程地质,利用混凝土梁柱临时托换体系满足始发要求,并采用SAP2000有限元软件建立二维及三维模型进行模拟分析,提出转换始发的关键技术。得出采用临时结构托换技术解决大直径盾构整体始发技术是可行的,且临时结构托换体系对原结构尺寸未产生影响。通过分析验证了混凝土梁柱体系在在地铁车站结构受力体系临时转换时的适用性。     

Privacy protection method for fine-grained urban traffic modeling using mobile sensors

With the ubiquitous nature of mobile sensing technologies, privacy issues are becoming increasingly important, and need to be carefully addressed. Data needs for transportation modeling and privacy protection should be deliberately balanced for different applications. This paper focuses on developing privacy mechanisms that would simultaneously satisfy privacy protection and data needs for fine-grained urban traffic modeling applications using mobile sensors. To accomplish this, a virtual trip lines (VTLs) zone-based system and related filtering approaches are developed. Traffic-knowledge-based adversary models are proposed and tested to evaluate the effectiveness of such a privacy protection system by making privacy attacks. The results show that in addition to ensuring an acceptable level of privacy, the released datasets from the privacy-enhancing system can also be applied to urban traffic modeling with satisfactory results. Albeit application-specific, such a “Privacy-by-Design” approach would hopefully shed some light on other transportation applications using mobile sensors.     

Estimates of vertical mixing during a Lagrangian experiment off the Galician coast

An adjoint 1-D model was used to determine vertical diffusivity coefficients from temperature profiles collected within a filament escaping from the Galician coast following an upwelling event. The optimisation scheme ended with relatively high diffusivity values within the thermocline (9×10⁻⁵ m² s⁻¹). Such high values are relevant for biogeochemical exchanges between surface and deep waters in stratified areas.The optimised values were several orders of magnitude higher than the bulk of diffusivity measurements recorded with a free-falling device; however, the optimisation solution was consistent with the arithmetic mean of the measurements in the thermocline (7.7×10⁻⁵ m² s⁻¹), giving more weight to the few largest values. Below the thermocline, the data assimilation method failed because of the three-dimensional nature of the advective field of the upwelling system. Ignoring this advective forcing in the model led to estimates that were two orders of magnitude too high.The results suggest that turbulent mixing is a random process where a few intense events determine the average mixing that drives the long-term evolution of the water column structure. This statistical property is very important when one wants to use instantaneous diffusivity measurements for modelling purposes.     

汽车硅油风扇离合器性能试验方法研究和测试台研制

通过对汽车硅油风扇离合器工况的模拟和高效测试方法的研究,研制测试其各项技术参数的数控自动测试台。实现对产品性能的自动、高效、准确的判定。     

装载机连杆机构优化设计

结合传统设计方法和现代优化方法有效地解决了原设计中装载机不能满足平移性和自动放平性的问题;在用作图法确定铰接点大致位置的基础上,建立了连杆机构参数化模型,并对模型进行了优化研究。结果表明:新机构能满足平移性和自动放平性要求。该方法对类似的机构优化问题有一定的参考价值。     

高原湿地公路盲管排水系统设计研究

国道213线郎木寺至川主寺公路改建工程通过我国最大的高原湿地——若尔盖湿地，设计中掌握公路附近湿地的地下水流特征才能确定盲管的管径和铺设密度。为此，在对郎川公路和若尔盖湿地资料收集和实地调查的基础上，通过在典型地区进行抽水试验获得实测数据，并采用数值模拟得到地下水流模型，从而进行盲管排水系统设计。     

初应力法模拟隧道开挖过程的有限元原理及列式

阐述有限元方法模拟隧道开挖过程的理论和公式,提出分析中的若干基本概念和问题,描述采用ANSYS软件模拟开挖的原理和步骤。通过算例说明模拟分析的有效性。     

联拱隧道施工的数值模拟

利用隧道专用软件“同济曙光”对某联拱隧道两种不同的施工方案了进行数值模拟，通过比较，优选合理的施工方案，指导公路隧道的的设计和施工。     

点燃式CNG发动机燃烧过程研究

利用混合气形成和燃烧三维模型建立了针对CA6SE1—21N增压点燃式CNG发动机的数值模拟研究平台,并对模型进行了试验验证,同时研究了该发动机混合气形成和燃烧的缸内微观变化历程。验证结果表明,CNG发动机混合气形成及燃烧过程的数值模拟结果和试验结果吻合较好,所选模型适合对CNG发动机进行模拟分析。模拟结果表明,缸内混合气形成可分为大幅度掺混和弱流动混合两个阶段;采用螺旋进气道与平缸盖时,在压缩后期逐渐形成强涡流、低滚流的刚性涡;点火时刻缸内混合气呈上稀下浓的分布,不利于提高点火稳定性和火焰传播速度。