振动法测量斜拉桥索力的关键技术

基于振动法测量原理,就影响测量斜拉桥索力的关键因素对索力测试精度的影响作一分析,由此可针对各影响因素提出实际测量中应注意的问题和信号处理方法。实践证明,该方法可有效避免振动法索力测量中不利因素的效应,且得出较好的测量结果。     

大伙房水库输水工程掺合料试验分析

在大伙房水库输水工程中使用的掺和料主要包括微硅粉和粉煤灰两种。作为隧洞断面岩石支撑和衬砌的重要手段之一——喷射混凝土支护,对TBM隧洞掘进机掘进进度和安全影响极大。喷射混凝土的性能以及可操作性在一定程度上取决于掺和料的品种、性能及掺量等。经过大量的现场试验和现场应用,取得很好的效果。     

船舶调度闸外编排算法

为了提高船闸的通过能力,优化船舶进闸调度,分析了三峡船闸船舶的平均过闸间隔时间,提出了闸外编排的概念,分析了船舶在进闸调度中的操作流程,以安全性和进闸耗时为目标,建立了闸外编排的数学模型,设计了相应的启发式求解算法,将模型的目标和约束条件通过启发式方法生成船舶在闸外的排序法则。数值试验分析结果表明闸外编排数学模型切实可行,排序算法可以生成安全高效的进闸方案,闸外编排的实现考虑了船舶进闸时间和安全性原则,缩短了闸次间隔时间,提高了日开闸次数,有效地提高了通航设施的整体通过能力。     

Experimental and finite element analysis of fatigue strength for 300 mm2 copper power conductor

The fatigue strength of a 300 mm² stranded copper conductor was investigated experimentally and by finite element (FE) analysis. An analytical model was also developed and validated. Wires taken from the outer layer of the conductor were fatigue tested in tension–tension loading and compared with similar data for wires taken from a 95 mm² conductor. The wire cross section was deformed due to the compacting process that was applied during fabrication. When corrected for stress concentrations due to the deformation the data for the two sets of wire fell within the same scatter-band. Full scale testing was carried out in a specially designed rig with constant tensile load and reversed displacement controlled bending with a fixed curvature variation. The loading is a simulation of the loading of a power cable hanging from a floating vessel through a bellmouth. Conductors were tested in two states; dry and lubricated. A finite element model was established for the copper conductor. The model was formulated by a combination of elastic beam and beam-contact elements that included the effects of friction. The effect of local bending due to contact forces was included in the model. Two contact conditions were investigated; the point (trellis) contact between adjacent layers of wire and the inline contact within each layer and between the first layer (centre wire) and the second layer. The FE model was validated by a calibration test of a full scale conductor, and by sensitivity studies varying the size and the number of elements of the model. Fatigue analysis of the conductor was carried out, based on the S–N curve for individual wires. Taking into account the effects of friction and local bending, agreement was obtained between predicted and experimental fatigue strength of the conductor, for the FE model as well as the analytical model.     

钢绞线斜拉索在狭窄空间内的特殊张拉工艺

对于塔内空间极其狭窄的斜拉桥，其斜拉索安装、张拉等极其困难。以贵州省某斜拉桥为例，介绍一种特殊、简便、高效、经济的斜拉索张拉施工方法，可以较好地解决因塔内空间狭窄而导致不便开展斜拉索相关工序的难题。     

先张法槽式张拉台座承力杆设计分析

本文介绍了先张法槽式张拉台座的力杆的设计分析。分别从承受的张拉力、结构稳定分析、强度验算、确定横向联系梁间距和纵向变形方面对工程实际进行验算。解决了梁板加宽后张拉力增加而张拉台座承力杆截面不需要增大的实际问题。     

桥墩盖梁加固设计与施工探讨

以实际工程为背景，探讨了体外预应力加固桥墩盖梁的方法，经过优化设计采用钢锚梁进行预应力锚固。介绍了钢锚梁的具体构造，采用土木仿真有限元软件模拟分析，对盖梁混凝土承载能力、正常使用和持久状况应力、钢锚梁强度和稳定性进行研究，研究结果验证了加固措施的合理性，探讨了加固施工工艺。     

装载机连杆机构优化设计

结合传统设计方法和现代优化方法有效地解决了原设计中装载机不能满足平移性和自动放平性的问题;在用作图法确定铰接点大致位置的基础上,建立了连杆机构参数化模型,并对模型进行了优化研究。结果表明:新机构能满足平移性和自动放平性要求。该方法对类似的机构优化问题有一定的参考价值。     

钢-混凝土组合梁体外预应力体系施工技术

介绍钢-混凝土组合梁体外预应力钢索施工中技术难点及施工内容。     

提高斜拉索索力估算精度的一种新方法

根据斜拉桥拉索振动的特点,建立了考虑垂度及斜度影响的振动微分方程,并利用奇异摄动解法进行求解。不仅考虑了索的刚度,而且将索的边界条件假定为简支和固支耦合的情况,在此基础上提出了频率法的索力计算实用公式。分析比较了目前国内外的其他主要计算公式,结果表明该公式具有高精度和计算方便的特点。将该实用计算公式用于南京长江三桥施工控制中,通过对实际斜拉索测试得到的各阶频率进行计算,并与设计索力和压力传感器得到的索力进行对比分析。计算表明该公式能够满足实际工程的需要,可广泛适用于频率法测估各种索类结构的内力。