公路工程土石方填筑的施工质量控制

在石料丰富的山区高速公路高填方路段进行施工,经常采用土石混填路堤。从选择料场、控制土石层的虚铺厚度、何时碾压、控制土的含水量、碾压遍数及压路机吨位、检测等方面进行了阐述,分析了土石路基常见病害的形成原因,并提出相应的施工工艺和控制措施。     

聚合物水泥混凝土复合式路面关键技术研究

聚合物水泥混凝土（犘犆犆）复合式路面是针对普通水泥路面的缺陷而提出的一种新型路面结构形式。文章对犘犆犆的材料选择与制备以及路用性能进行了研究,指出犘犆犆在强度、刚度、抗弯拉疲劳性能、耐久性能等方面相对普通水泥混泥土有着明显的优势,同时结合工程实例,分析了犘犆犆复合式路面关键施工技术中存在的问题,并提出相应的解决措施。     

道路运输企业质量评价体系研究

文章分析了现有道路运输企业质量评价体系的不足,提出了新的道路评价方法,为将来的道路运输管理和规划提供了一个基础。     

百色-罗村口高速公路沥青路面施工控制要点

文章结合广西百色-罗村口高速公路施工工程实例,分析了广西高速公路沥青路面施工中存在的主要问题,提出了高速公路沥青路面施工控制要点,对我国南方地区高速公路沥青路面施工具有一定的参考价值。     

开口加劲肋正交异性钢桥面铺装力学分析

文章以开口加劲肋正交异性钢桥面铺装体系作为研究对象,建立了包括桥面板和铺装的整体三维有限元分析模型,研究了荷载作用下铺装层的力学特性。分析表明,横向拉应力是开口加劲肋正交异性钢桥面铺装设计的一个重要控制指标;开口加劲肋正交异性钢桥面铺装层间剪应力较大,在铺装结构设计时应注意选择具有较强抗剪强度的粘结材料;开口加劲肋正交异性钢桥面铺装对车辆荷载的应力应变响应具有很强的局部效应。     

Assessing asymmetric response effect of behavioral intention to service quality in an integrated psychological decision-making process model of intercity bus passengers: a case of Taiwan

This study introduces the concept of loss aversion to consumer behavioral intention at the personal psychological level to develop an integrative structural equation model for analyzing traveler psychological decision making. In this model, the relationship between behavioral intention and service quality is a non-smooth function based on the theory of loss aversion. The expectation service quality in the SERVQUAL model proposed by Parasuraman, Zeithaml, and Berry (PZB) serves as a reference point. This model can be applied to analyze the effect of non-smooth response of behavioral intention to service quality in a traveler psychological decision-making process model. Intercity travel among cities in Taiwan is used as an empirical example. Data were gathered in cities in Taiwan via a questionnaire survey, and the model was tested using path analysis performed by LISREL. The empirical result shows that all causal relationships are statistically significant. Service quality loss influences repurchase intention more than does Service quality gain. Finally, this study concludes by discussing managerial implications and suggesting directions for future research.

The problem of cold starts: A closer look at mobile source emissions levels

While the phenomenon of excess vehicle emissions from cold-start conditions is well known, the magnitude and duration of this phenomenon is often unclear due to the complex chemical processes involved and uncertainty in the literature on this subject. This paper synthesizes key findings regarding the influence of ambient and engine temperatures on light-duty vehicle (LDV) emissions. Existing literature, as well as analytical tools like the U.S. Environmental Protection Agency’s Motor Vehicle Emission Simulator (MOVES), indicate that while total vehicle emissions have dropped significantly in recent years, those associated with cold starts can still constitute up to 80% for some pollutant species. Starting emissions are consistently found to make up a high proportion of total transportation-related methane (CH₄), nitrous oxide (N₂O), and volatile organic compounds (VOCs). After 3–4 min of vehicle operation, both the engine coolant and the catalytic converter have generally warmed, and emissions are significantly lower. This effect lasts roughly 45 min after the engine is shut off, though the cooling rate depends greatly on the emission species and ambient temperature. Electrically (pre-)heated catalysts, using the bigger batteries available on hybrid drivetrains and plug-in vehicles, may be the most cost-effective technology to bring down a sizable share of mobile source emissions. Trip chaining (to keep engines warm) and shifting to non-motorized modes for shorter trips, where the cold start can dominate emissions, are also valuable tactics.     

钢箱梁桥面环氧沥青铺装施工工艺

通过环氧沥青混凝土铺装施工技术,探讨在气候恶劣、建设条件复杂的桥区,进行大规模环氧沥青混凝土铺装的施工工艺改进情况。     

地铁暗挖隧道二次衬砌施工质量控制浅析

文章根据深圳轨道交通二期工程安托山站—侨香站暗挖区间的二次衬砌施工经验,分析了地铁暗挖隧道二次衬砌施工质量的影响因素以及二次衬砌施工过程中容易发生的质量问题,并提出了具体的控制措施。通过经验总结,使地铁施工的管理、质量控制、施工通病防治上升一个台阶。     

Multi-objective optimization for asphalt pavement maintenance plans at project level: Integrating performance,cost and environment

Traditionally, asphalt pavement maintenance mainly considers pavement performance and cost and largely ignores the environment while substantial amount of environmental burdens are released in the process. In this study, a multi-objective optimization model was developed integrating the three elements in order to optimize the asphalt pavement maintenance plans at the project level. Pavement performance element was decided as the multiplier of pavement serviceability index and traffic volume. Cost element was represented by the net present value, including components of agency cost, vehicle operation cost and salvage value. Environmental element, integrating energy consumption, global warming potential, acidification potential and respiratory effects potential, was measured by the life cycle assessment model. A hypothetic asphalt pavement maintenance case study was conducted using the developed multi-objective optimization model and harvested 103 sets of feasible combinations of maintenance plans, each of which is non-dominated by the others. Trade-offs analysis was performed among the three objectives and visualized in both two- and three-dimension forms. It is found there is an opportunity of reducing the cost and environmental impacts to 80.3% and 77.8% and increasing the pavement performance to 146.6% compared to the base case. However, they are mutually compromised and cannot be reached simultaneously. The developed model reveals the quantitatively interactive relationship of the three objectives and helps optimize the asphalt pavement maintenance plans.