基于Matlab油船意外泄油性能的程序设计

基于概率方法的意外泄油性能参数计算是2010年1月1日及以后新造船破舱稳性需要评估的性能之一,满足一定的衡准要求方可。根据油船的分舱分别进行船底破损概率和船侧破损概率的插值,然后按照一定的公式求出船底破损后与船侧破损后的泄油量的加权之和,即意外泄油性能参数。由于手工计算费时费力,文章基于Matlab平台,开发了意外泄油性能参数的自动计算程序模块。计算结果与文献结果相比较,证明了本程序的计算精度,具有较好的工程实用价值。     

Environmental and transport effects of warehouse relocationing: evidence from Norway

Reducing traffic volumes and CO2-emissions from freight transport has proven difficult in many countries. Although the increasing suburbanization of warehouses is seen as a relevant land use trend, comprehensive analyses of their impact remain scarce. This study uses real data in modeling transport, costs, environmental and modal effects from warehouse relocations around Oslo and Trondheim (Norway). Results indicate that for Oslo, traffic performance (ton-km), CO2-emissions, and transport costs increase following warehouse suburbanization. For Trondheim, transport performance and CO2-emissions increase less, while transport costs decrease marginally. We conclude that specific case characteristics (geography and trade patterns) are important in determining the strength and direction of effects, and expect that common concomitant developments (warehouse centralization and consolidation) would lead to more pronounced results. Our findings confirm some, but challenge other, findings from the relatively scarcely literature available. Finally, the study's more general insights and observations can help advance similar analyses beyond Norway.     

导电密封胶对不锈钢车体电阻点焊焊接性能影响研究

分析了电阻点焊原理,对相同的点焊搭接方式,分别采用3种工况进行焊接试验。3种工况分别采用相同焊接参数对搭接接触面涂导电密封胶和不涂导电密封胶的试件进行焊接;优化焊接参数后,对搭接接触面涂导电密封胶的试验件进行焊接。对3种工况下完成的焊接试件进行拉伸力检测试验、金相熔核尺寸检测和缺陷检测试验,对熔核直径、拉伸力、熔核内部缺陷的试验结果进行分析。试验结果表明:导电密封胶对电阻点焊的焊接性能存在影响;通过适当优化焊接参数,可以提高涂导电密封胶试件的焊接性能,焊接质量能够满足产品焊接要求。     

电子车辆识别技术的性能、安全性和成本分析及应用

电子车辆识别(EVI)是利用电子信号对车辆进行自动识别和监测的技术.随着RFID技术的不断发展,EVI应用的领域和范围不断扩大,这对EVI的性能、安全性和成本提出了更高的要求.     

Estimation of delay variability at signalized intersections for urban arterial performance evaluation

Urban arterial performance evaluation has been broadly studied, with the major focus on average travel time estimation. However, in view of the stochastic nature of interrupted flow, the ability to capture the characteristics of travel time variability has become a critical step in determining arterial level of service (LOS). This article first presents a stochastic approach that integrates classic cumulative curves and probability theories in order to investigate delay variability at signalized intersections, as a dominant part of the link travel time variability. This serves as a basis for arterial travel time estimation, which can be obtained through a convolution of individual link travel time distributions. The proposed approach is then applied in the estimation of travel time along one arterial in Shanghai, China, with abundant automatic vehicle identification (AVI) data sources. The travel time variability is evaluated thoroughly at 30-min intervals, with promising results achieved in comparison to the field measurements. In addition, the estimated travel time distributions are utilized to illustrate the probability of multiple LOS ranges, namely, reliability LOS. The results provide insights into how we might achieve a more reliable and informative understanding of arterial performance.     

Effectiveness of travel time reliability indicators in the light of the assessment of dynamic managed lane strategy

ABSTRACT

The aim of traffic management is to ensure a high quality of service for a maximum number of users by decreasing congestion and increasing safety. Uncertainty of travel times decreases the quality of service and leads end users to modify their plans regardless of the average travel time. Indicators describing travel time reliability are being developed and should be used in the future both for the optimization and for the assessment of active traffic management operations. This article discusses the efficiency of certain reliability indicators in an ex-post assessment of a traffic management strategy. Ex-post assessment is based on an observational before–after study. As some factors other than the studied management strategy may intervene between the two periods, and as most reliability indicators require knowledge of the full travel time distribution and not only its average, a methodology is developed for the identification of the impact of these exogenous factors on the whole distribution. Many reliability indicators are split into different parts allowing the identification of the part due to the management strategy impact. The methodology is tested numerically on a managed lane operation consisting of Hard Shoulder Running (HSR) at rush hour on a section of a French motorway. The variation of some reliability indicators appears misleading, whereas the splitting of the indicators increases our understanding of the strategy and highlights its impact. The paper gives the reliability assessment of the HSR field test and discusses different reliability indicators to identify their potential performances and shortcomings.     

基于响应面和遗传算法的柴油机瞬态过程喷油参数优化

基于台架试验数据,利用响应面法建立了某工程机械用柴油机瞬态过程喷油参数与性能的近似高精度模型,基于此模型采用遗传算法对瞬态过程喷油参数分别进行离线优化研究。结果表明:采用单目标优化确定的燃油消耗率(BSFC)、NO_x比排放量和颗粒质量(PM)比排放量的优化极限分别可达180.23g/(kW·h),8.92g/(kW·h)和0.011 8g/(kW·h),相对原机可降低多达4.5%,34.0%和37.3%。双目标优化的Pareto解集表明,相比于同时优化BSFC和NO_x比排放量,BSFC和PM比排放量更容易同时得到优化。采用权重因子适应度函数的三目标优化结果对应的BSFC,NO_x比排放量及PM比排放量分别为184.70g/(kW·h),12.62g/(kW·h)和0.012 2g/(kW·h),较原机分别降低2.1%,6.6%和35.3%。改进优化模型后,性能优化Pareto解集对应的BSFC和PM比排放量水平都非常接近其优化极限,但NO_x比排放量相对其优化极限仍然较高。     

水泥粉煤灰碎石基层材料路用性能的研究

对水泥粉煤灰碎石基层材料的各项路用性能进行了试验研究.研究表明,水泥粉煤灰稳定碎石兼具水泥和二灰稳定材料的优点,将其作为路面基层材料是可行的.     

二灰冷再生沥青路面基层路用性能研究

通过对原路材料进行材料组成分析,并且通过对几种不同配合比的冷再生材料的无侧限抗压强度、劈裂强度、冲刷性能的初步研究,对二灰冷再生材料的性能做出了初步评价.二灰冷再生材料基本可以满足规范对沥青路面的半刚性基层的要求.     

Power network parameter estimation method based on data mining technology

The parameter values which actually change with the circumstances, weather and load level etc.produce great effect to the result of state estimation. A new parameter estimation method based on data mining technology was proposed. The clustering method was used to classify the historical data in supervisory control and data acquisition (SCADA) database as several types. The data processing technology was impliedto treat the isolated point, missing data and yawp data in samples for classified groups. The measurement data which belong to each classification were introduced to the linear regression equation in order to gain the regression coefficient and actual parameters by the least square method. A practical system demonstrates the high correctness, reliability and strong practicability of the proposed method.