多模式混合交通网络流星分配模型及算法

在现代城市交通系统中,由于有多种交通模式存在,出行者通常采用从一种交通模式换乘到另一种交通模式的方法来节省时间和金钱。采用状态转移网络来描述这种多模式交通网络的结构,同时以路段上的混合交通阻抗函数为基础,对多模式交通网络中的各种费用加以分析,从而可得到多模式交通网络流量分配的模型和算法。     

基于自适应小生境遗传算法的混合交通网络设计双层规划模型

在现有的交通网络设计问题研究基础上,采用双层规划模型来描述混合网络设计问题,其中上层模型综合考虑网络阻抗、投资额以及CO的排放总量三方面因素,建立起以三者之和最小为目标的优化函数;下层模型为用户均衡模型。根据所建模型的特征,利用一种基于自适应方法和小生境技术的改进遗传算法进行求解。实例计算证明：此模型和算法是研究混合交通网络设计问题的有效方法。     

MELP语音算法在数字对讲机上的应用

针对如何寻求一种能够适合数字对讲机调制速率的声码器问题,本文提出了混合激励线性预测(MELP)算法.MELP语音编码算法对传统二元激励线性预测声码器做了改进,通过分析其关键技术,并与其它通信系统的声码器进行对比,对MELP应用于数字对讲机平台的可能性做了详细的论证,实验结果表明MELP算法在数字对讲机领域有着广泛的应用前景,这为数字对讲机的发展做出了新的探索.     

城市轨道交通列车时刻表与车底运用整合优化模型

基于单条城市轨道线路,分析客流需求、列车时刻表及车底运用之间的密切联系, 以运行安全、资源限制、列车容纳能力等作为主体约束,综合考虑公司运营费用和乘客出行费 用,构建基于客流分布的城市轨道交通列车时刻表与车底运用整合优化模型,并采用线性处 理方法,将模型转化为混合整数线性规划(MILP)模型.最后,以北京地铁亦庄线为实例,利用 ILOG CPLEX对模型进行求解.结果表明,与既有的优化方法相比,本文模型得到的列车运行 计划方案能够更好地节约成本,提高车底利用效率,满足城市轨道交通乘客和运营企业双方 的利益.     

突发环境下城市道路网关键路段集识别

为了更好地判断出突发环境下城市道路网络中的关键路段,本文结合路网脆弱性分析方法,构建了一种涵盖单条到多条路段失效的关键路段集识别模型.首先,对路网进行随机攻击,运用网络效率、最大连通子图等鲁棒性指标寻找潜在关键路段;然后,引入0-1变量,建立一个含道路通行能力约束的非线性优化模型;再以此为基础,用分段线性化手段处理目标函数与约束条件,将模型转化为一个混合0-1规划问题;最后,以分支定界法求解模型并设计算例验证.结果表明：突发环境下的路网关键路段集一般不是若干关键路段的简单集成,其构成元素在几何拓扑层面上也不具有邻接关系;而且随着失效路段数的增多,路网鲁棒性与总阻抗变化量之间会呈现出较显著的负相关关系,可用“逆向”曲线进行刻画,效果良好.     

温拌SBS沥青混合料旋转压实特性

采用旋转压实仪(SGC)成型温拌SBS沥青混合料试件,根据体积参数的变化规律确定了最佳拌合温度,根据旋转压实曲线对温拌沥青混合料和热拌沥青混合料的压实特性进行了对比分析.分析结果表明:与热拌沥青混合料相比,用旋转压实法确定温拌沥青混合料成型温度降低约20℃,动稳定度提高30%,低温抗裂和抗水损害能力相差不大.在压实初期...     

宁波大榭第二大桥总体设计

大榭第二大桥为大榭岛对外与北仑联结的第二座特大型跨海桥梁工程,全长约5.5 km,由主桥、大榭侧及北仑侧引桥、炮台岗深路堑及老329国道简易立交组成,主桥采用大型单索面帆形混合塔斜拉桥.介绍了全桥总体布置、主桥及两侧引桥结构的设计与构思.     

Asymptotic calculation of wave period statistics in non-Gaussian mixed sea

This article concerns the calculation of the wave period probability densities in non-Gaussian mixed sea states.The calculations are carried out by incorporating a second order nonlinear wave model into an asymptotic analysis method which is a novel approach to the calculation of wave period probability densities.Since all of the calculations are performed in the probability domain,the approach avoids long time-domain simulations.The accuracy and efficiency of the asymptotic analysis method for calculating the wave period probability densities are validated by comparing the results predicted using the method with those predicted by using the Monte-Carlo simulation(MCS) method.     

Synchronized Production and Transportation Planning Using Subcontracted Vehicles in a Production-Distribution Network

Abstract

Effective management of interfaces between procurement, supply, production and distribution for higher efficiency in the supply chain is an important issue in global manufacturing, where the synchronization of production and transportation planning represents important savings in operational costs. This paper focuses on the synchronization of production planning and transportation planning in a production distribution network, where transportation is subcontracted to a professional transportation enterprise (PTE) for vehicle-hiring. Dynamic and flexible numbers of vehicles are used to cater for fast changing market demands. Thus, the number of vehicles to be hired is viewed from the planning point of view as an operational decision considered simultaneously with production and transportation planning. A mathematical model – SPTP/MTDS – for synchronized production and transportation planning under multiple times and direct shipping strategy (MTDS) is discussed, and a Lagrange relaxation decomposition-based two layer decision procedure (LRD-TLDP) is developed. By introducing artificial decision variables and Lagrange multipliers, SPTP/MTDS is decomposed into a production decision sub-problem (SPTP-PD), and a distribution decision sub-problem (SPTP-DD). A priority-based assignment heuristic and a partial chain-based genetic algorithm are developed to solve SPTP-PD and SPTP-DD, respectively. An illustration of the application of the model in an electronic appliance manufacturing enterprise in China is presented.     

Converting mixed pedestrian flows into equivalent commuters using standard pedestrian equivalent factors

This paper develops the concept of standard pedestrian equivalent (SPE) factors for converting a mixed pedestrian flow into an equivalent commuter flow. After a comprehensive review of passenger car equivalent (PCE) methodologies, the equal total travel time method is utilised for SPE estimation. A micro-simulation approach is employed for the formulation of the total travel time–flow relationship. Field data collected on walking speed distributions for commuters and older adults in Australia are used as model inputs. An independent samples t-test confirms the significant difference between walking speeds of commuters and older adults. For this paper, a unidirectional flow on flat walkways is initially considered and evaluated across proportions of older people, different flows and different walkway widths. The introduction of older adults significantly increases total travel time especially under congested conditions. Results of this investigation can be used for evaluation or design of pedestrian facilities experiencing similar flow conditions.