京沪高速铁路中小跨度桥梁结构选型初探

结合秦沈客运专线和其它国家或地区高速铁路桥型的选择 ,对京沪高速铁路中小跨度桥梁的刚度、造价等方面进行分析 ,结论是箱形截面梁性能优于T梁 ,在地基条件好的区段连续梁优于简支梁。     

UHPC薄板屈曲试验及临界板厚比研究

UHPC材料是一种新型纤维增强水泥基复合材料,利用材料强度高的特点设计建造桥梁通常为薄壁箱形结构,薄壁箱梁存在剪力滞效应、扭转畸变、翘曲失稳等问题。为研究UHPC箱梁顶板翘曲失稳,指导UHPC薄壁箱梁结构避免局部失稳破坏先于材料强度破坏,进行不同边界条件均布加载的19个UHPC薄板屈曲荷载试验研究。结果表明:UHPC板的屈曲主要有局部受压破坏、单方向裂缝破坏和双向裂缝破坏3种;屈曲荷载计算应引入材料和制作修正系数0.7;UHPC板最大幅值位于h/2高度,并只产生一个半波。最后对屈曲荷载试验值进行有限元计算分析对比,并通过欧拉公式推导UHPC箱梁顶板的临界板厚比限值。     

Numerical simulation on truncated oval-nosed projectile penetrating into stiffened plate北大核心CSCD

[Objectives]In this paper, the numerical simulation method is used to study the anti-penetration performance and energy absorption mode of a stiffened plate, as well as the influence of different stiffened bars on the flight attitude of the projectile body.[Methods] Finite element software LS-DYNA is used to simulate the process of a truncated oval-nosed projectile penetrating a stiffened plate, and the results of the numerical simulation are compared with an experiment to verify the reliability of the numerical simulation method. The momentum method and mass equivalence method are used to predict the residual velocity of the projectile, and the applicability of different theoretical methods within different velocity ranges is compared. The deformation energy of different regions of the stiffened plate is then extracted to analyze the influence of the initial velocity of the projectile body on the energy absorption mode of the target plate. Finally, the structure of the stiffeners is changed and the influence of the relative position of the stiffeners on the penetration attitude of the projectile body is analyzed.[Results]The results show that the mass equivalence method is more accurate than the momentum method in predicting the residual velocity of the stiffened plate when the initial velocity of the projectile body is in the range of 300–900 m/s. The ratio of the deformation energy of the stiffened plate to the energy loss of the projectile body decreases with the increase of the initial velocity of the projectile body. The effect of a T-stiffened plate on trajectory is greater than that of a rectangular-stiffened plate.[Conclusions]The related calculation method and research results have certain reference value for research and engineering application surrounding the anti-penetration of stiffened plates. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Dynamic response of stiffened plate under internal blast: Experimental and numerical investigation

Stiffened plates are the basic units of ships, aircraft and other structures. The purpose of this paper is to investigate the dynamic response of stiffened plates under internal blast loading. A combined experimental and numerical investigation was carried out on the cabin structures with unstiffened, single-stiffened and double-stiffened plates. The characteristics of internal blast wave, the effects of stand-off distance and the stiffener position on the deflection and failure modes of stiffened plates were sequentially analyzed. It was interestingly found that the deflection first decreased and then increased with the increase of stand-off distance. Additionally, despite of the reinforcement on the deformation resistance, the stiffeners tended to reduce the damage tolerance of the target plates. This research provides the basic data and theoretical support for the blast resistance design of ships, aircraft and other structures.     

船舶开孔梁局部屈曲的无网格MLPG分析方法

[目的]针对船舶开孔梁板易产生局部屈曲效应、受到较高的集中载荷作用会产生明显的结构响应和屈曲破坏力的问题,提出采用无网格数值方法对该类问题进行数值分析。[方法]首先,以问题域离散节点为基础建立其紧支函数,运用加权余量法建立系统位移场离散方程,并由移动最小二乘法构造离散节点的形函数,以获得位移函数的逼近函数;然后,结合经简化的屈曲评估法,将屈曲方程特征值求解进行降阶处理,得到更为精确的屈曲载荷因子;最后,进行算例演示,比较所提方法和传统计算方法并进行验证。[结果]结果显示,所提方法有效,其结果与原结构有着更高的契合度。[结论]针对开孔板梁的无网格法数值分析特性可为分析各种形状的蜂窝状板梁结构提供一种新的思路。     

Geometric Nonlinear Formulation for a Rectangular Plate with Large Deformation

Absolute nodal coordinate formulation for a rectangular plate with large deformation was improved. Based on nonlinear elastic theory, a precise strain expression is used to derive the equations of motion. Both shear strain and transverse normal strain are taken into account. Different from the previous absolute nodal coordinate formulation, the absolute nodal coordinates, which describe the displacement and slope of the element nodes, are separated into three parts: the absolute nodal coordinates in X, Y and Z directions, respectively, so that the dimension of the mass, stiffness and force matrices is reduced. Furthermore, by using constant matrices, which can be calculated and saved before simulation, the nonlinear stiffness matrices can be calculated by matrix multiplication for each time step, so that the computational efficiency can be improved. Finally, simulation example of a rectangular plate with large deformation was used to verify the accuracy and efficiency of the present formulation.     

CLINICAL COMPARISION OF THE TREATMENT OF CERVICAL PROLAPSE OF INTERVERTEBRAL DISC BY USING CAGE OR TITANIUM PLATE

In the past,cervical prolapse of intervertebraldisc,a more common cervical vertebral disease,wasoftentreated withremoval of nucleus pulposus com-bined with autogenous iliac crest graft(AICG)andtitaniumplate.In recent years,cage becomes moreand more popular and is accepted gradually.Goodclinical effects have been achieved in the treat mentof cervical prolapse of intervertebral disc by usingSolis cage.However,at present few reports havebeen available to describe the clinical effects of trea-ti…     

连续箱梁桥内力增大系数的计算模型

提出了具有一对弹簧支承的计算模型,用来计算连续箱梁桥的内力增大系数.用本模型所得到的一个算例的分析结果与按传统方法的分析值吻合甚好,并且它比后者在计算过程上得到了一定程度的简化.     

粘贴钢板法在石拱桥加固中的应用

粘贴钢板加固法是桥梁加固中采用得较多的一种方法,下面就粘贴钢板法在拱桥加固中的应用作了简单介绍,并详细对计算方法和施工工艺作了进一步探讨.     

墙背填料为砂性土的短卸荷板式挡土墙离心模型试验

本文利用离心模型试验技术对短卸荷板式挡土墙进行了试验分析，在墙背填料为砂性土的情况下，通过对墙体位移的控制，得到了主动极限状态下的墙背土压力及卸荷板上的土压力的大小和分布。