上海市公交柴油车碳烟排放的评估与分析

介绍了上海市道路交通以及公交汽车拥有量的发展；按照发动机购置年份、机型以及车队等统计上海市公交柴油车碳烟排放状况；追踪某一车队同一机型连续几年来的百公里油耗以及碳烟排放水平，分析了影响公交柴油车碳烟排放的各种因素；最后从管理方面提出加强I／M制度以降低公交柴油车碳烟排放。     

基于CAN的混合动力汽车控制系统体系结构研究

在分析某型混合动力汽车的结构与工作原理的基础上，基于CAN总线技术，研究了控制系统的网络拓扑结构、节点功能及信息传递方式，以及硬件设计中的节点通信接口结构和控制系统的软件结构。其研究方法和结论为混合动力汽车以及其它类型车辆控制系统的研究和开发提供了理论依据和技术基础。     

我国清洁汽车的发展及对策

简述了我国清洁汽车的发展概况和存在的主要问题,重点提出我国清洁汽车“应加快燃油汽车先进排放控制技术的研发与应用;代用燃料汽车的发展重点应继续放在单一燃料燃气汽车上;混合动力汽车应加快发展,但自主开发应谨慎”等对策及建议。     

后置发动机城市公交车冷却系统的定性分析

简要介绍后置发动机城市公交客车冷却系统的布置结构,定性分析影响后置发动机城市公交客车冷却系统散热效果的各种原因,明确提高冷却系统散热效果的途径以及设计中的处理建议、注意事项等。     

EQ6110混合动力电动汽车再生制动控制策略研究

分析了电机再生制动对车辆制动性能的影响以及典型城市公交客车运行工况特点，提出了适于EQ6110HEV的再生制动控制策略——低制动强度时优先采用再生制动，高强度时按比例复合再生制动与摩擦制动。仿真计算表明：在各种循环工况下，EQ6110HEV采用这种再生制动控制策略均有较好的节能效果，可降低能耗10％～25％。     

基于CCP协议的HEV用ECU标定系统设计

CCP协议是基于CAN总线通信方式的车用ECU标定协议，具有通信可靠、传输速度快、通用性好等优点。在实时内核环境下设计了一套基于CCP协议的标定系统，并使用该系统实现了对混合动力电动汽车(HEV)动力系统中多个ECU同时标定的工作。     

基于ADVISOR2002混合动力汽车控制策略模块开发

介绍了混合动力汽车仿真软件ADVISOR中的并联控制策略，结合课题的实际情况，对ADVISOR2002的并联控制策略进行了二次开发，并针对某一车型进行了仿真对比，结果表明所提出的控制策略不仅能够鲁棒地在ADVISOR2002界面中运行，而且合理、可靠，满足实际需要。     

Performance Evaluation of Hybrid-Drive Buses and Potential Fuel Savings in Brazilian Urban Transit

Transporting more than 55 million passengers per day, buses are the main transit mode in Brazil. Most of these vehicles use diesel oil and this situation causes dependence on oil, extensive greenhouse gas emissions and increasing air pollution in urban areas. In order to improve this situation the options for Brazilian cities include the use of alternative fuels and new propulsion technologies, such as hybrid vehicles. This article proposes a procedure for evaluating the performance of a recently developed Brazilian hybrid-drive technology. A simple procedure is presented to compare hybrid-drive buses with conventional diesel buses in urban operation focusing on fuel economy and the potential for reducing diesel oil consumption through the use of hybrid-drive buses. Field tests carried out by the authors indicate that fuel consumption improvement through the use of hybrid-drive buses would certainly exceed 20%, resulting in lower fuel costs and reduced carbon dioxide (CO₂) emissions.     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

基于MTG的永磁电机启动性能研究

高速永磁电机是MTG发电的关键技术之一，通常采用变频调速的启动方法。高速和高频的特性，决定了高速电机的设计与普通电机有较大的不同。通过建立数学模型，采用仿真的方法可以较准确获得永磁电机的启动性能。