船舶制造企业质量信息管理系统框架模型研究

针对船舶制造企业质量信息管理普遍存在的质量管理体系与实际生产不一致、质量信息断层和信息孤岛等问题,本文提出了一种面向产品全生命周期的质量信息管理集成方案,以质量过程控制为基础,通过规范质量信息的内容和信息传递的渠道,将大量纵横交错汇聚在产品建造过程中的既离散又相关的质量信息有机地联系起来,实现各相关部门（船东、企业内部、供应商）质量信息的透明．     

空气净化器风道的计算机仿真

在进行空气净化器风道结构的设计中,风道的结构形式对风量起着重要的影响。本文利用ICEPAK计算机仿真软件在设计阶段对空气净化器的风道进行模拟仿真,建立了风道的仿真模型及建模过程,仿真出风道进口处与出口处的空气流速的变化值,进一步研究离心风机的风量与滤层阻力、流量、流速的影响关系。通过实验比较,在不同滤器种类的情况下,验证了风阻对风量的影响大小,证明了空气净化器风道计算机仿真的正确性。     

Two-dimensional numerical simulation and experiment on strongly nonlinear wave–body interactions

A constrained interpolation profile (CIP)-based Cartesian grid method for strongly nonlinear wave–body interaction problems is presented and validated by a newly designed experiment, which is performed in a two-dimensional wave channel. In the experiment, a floating body that has a rectangular section shape is used. A superstructure is installed on the deck and a small floating-body freeboard is adopted in order to easily obtain water-on-deck phenomena. A forced oscillation test in heave and a wave–body interaction test are carried out. The numerical simulation is performed by the CIP-based Cartesian grid method, which is described in this paper. The CIP scheme is applied in the Cartesian grid-based flow solver. New improvements of the method include an interface-capturing method that applies the tangent of hyperbola for interface capturing (THINC) scheme and a virtual particle method for the floating body. The efficiency of the THINC scheme is shown by a dam-breaking computation. Numerical simulations on the experimental problem for both the forced oscillation test and the wave–body interaction test are carried out, and the results are compared to the measurements. All of the comparisons are reasonably good. It is shown, based on the numerical examples, that the present CIP-based Cartesian grid method is an accurate and efficient method for predicting strongly nonlinear wave–body interactions.     

基于Petri网的现代造船车间工作流建模研究

面向生产过程控制,分析了现代造船车间生产作业流程与作业活动,提出以工作流管理系统为集成平台的车间生产过程管理,应用模块化着色网MCPN建立系统过程模型.动态适应性的系统过程模型是以基本子流程为模块,以作业任务为核心,自下而上建立的模块化Petri网结构,可体系化、参数化描述现代造船车间生产物流与作业流.     

舰舰导弹对敌水面舰艇突防能力评估模型初探

舰舰导弹是对水面舰艇攻击的主要武器之一,导弹突防能力是评价导弹性能的重要指标.根据反导武器系统的特点,建立了单发和多发导弹对敌舰攻击的突防能力模型.     

Quasisteady theory for the hydrodynamic forces on a circular cylinder undergoing vortex-induced vibration

Vortex-induced vibrations of a rigid circular cylinder were studied by constructing a theory based on a wake oscillator model under quasisteady approximations, thereby evaluating vortex-induced hydrodynamic forces acting on the cylinder. A lock-in limit line representing the boundary for the occurrence of frequency lock-in was also theoretically derived. Hydrodynamic forces in forced oscillation problems estimated by the theory were compared with measured ones. Although some discrepancies were found, particularly in cases with high-frequency oscillations, good agreement was achieved in most cases. Accordingly, we conclude that the present theory captures well real phenomena in the wake downstream of a cylinder subjected to a flow.     

集装箱船舶大型化现状与未来发展预测

美国次贷危机对全球实体经济影响的加深以及国际石油价格的剧烈变化短期内可能改变集装箱船舶大型化的趋势,但是从长期看,全球集装箱船舶大型化的趋势仍将继续。本文利用相关数据,分析预测未来集装箱船舶大型化的发展状况。     

潜艇非稳态流场计算流体力学不确定度分析

依照ITTC推荐规程对美国DARPA潜艇模型SUBOFF光体在不考虑自由表面情况下的CFD计算进行不确定度分析。选取中间尺度的时间步长,验证中采用细、中、粗三套网格。在最精细的网格上进行不同时间步长的研究。最后对潜艇表面压力计算进行确认。     

基于CFD方法的螺旋桨性能计算与分析

为实现快速预报螺旋桨敞水性能,并根据需要准确读取指定类型和指定位置的数据,利用FLUENT流体计算软件对螺旋桨敞水实验进行数值模拟,根据数值计算的结果绘制敞水性能曲线,并与实验结果进行比较,分别研究进速系数的变化和入射角的变化对螺旋桨性能的影响。     

大型集装箱船参数横摇模型试验和数值模拟研究

以4000TEU集装箱船为研究对象,通过系列自航模型试验,确定其在迎浪规则波中发生参数横摇的限界。试验结果显示：在迎浪规则波中,参数横摇通常发生在波浪遭遇周期为横摇固有周期一半的附近;对应不同遭遇频率时参数横摇的发生,存在一个临界波高;航速的增加和舭龙骨的安装将使参数横摇发生的临界波高增加;当有初始干扰时,参数横摇发生的临界波高较小。而且,数值模拟结果与模型试验结果比较吻合。