200万桶FPSO涂装生产模式的探索与实践

论述了上海外高桥造船有限公司（SWS）涂装部在建造200万桶浮式生产储油船（FPSO）时采用的生产组织管理模式,这对于SWS后续建造类似项目的涂装施工提供了良好的借鉴。     

Egg production and associated losses of carbon, nitrogen and fatty acids from maternal biomass in Calanus finmarchicus before the spring bloom

We present concurrent data on ingestion, egg production and the loss of maternal biomass in pre-spring bloom female Calanus finmarchicus incubated under conditions representative of those in situ in the North Atlantic. A balanced metabolic budget was constructed and used to examine the relative importance of ingestion and biomass for fuelling egg production during the incubations. Ingested carbon was not sufficient to meet the observed demands for egg production. More than 80% of the carbon utilised by the females was instead derived from their biomass. Fatty acid analysis demonstrated that the storage reserves, 20:1 (n−9) and 22:1 (n−11), were virtually absent before experimentation began, and therefore could not have been used to supply the carbon required for egg production during the incubations. The C:N mass-specific ratio of the biomass utilised was 4.1, suggesting that the females had instead catabolised protein in order to meet their metabolic demands. These results suggest that C. finmarchicus adopts a sacrificial reproductive strategy when food availability is low.     

基于Petri网的现代造船车间工作流建模研究

面向生产过程控制,分析了现代造船车间生产作业流程与作业活动,提出以工作流管理系统为集成平台的车间生产过程管理,应用模块化着色网MCPN建立系统过程模型.动态适应性的系统过程模型是以基本子流程为模块,以作业任务为核心,自下而上建立的模块化Petri网结构,可体系化、参数化描述现代造船车间生产物流与作业流.     

产品数据管理(PDM)实施技术研究

主要阐述了产品数据管理技术的基本概念,论述了PDM技术在企业中的应用和实施优势,分析了PDM技术实施的目标、内容和基本步骤。     

关于建立人力资源价值计量模式的探讨

通过对建立人力资源特性的分析,利用现有劳动人事管理中的劳动工资统计资料,在个人人力资源价值计量中用以岗位为标准计量人力资源价值,在整体(组织)人力资源价值计量中按人员类别结合行业特征划分人力资源价值分值,建立人力资源价值计量模式,作为人力资源价值核算依据,可以提高劳动工资统计资料的价值.     

基于GM(1,1)模型的交通客运量发展预测

采用灰色系统理论中的GM(1,1)模型,选取2001~2005年我国客运运量数据,分别建立了铁路、公路和民航客运周转量的预测模型,经检验,模型精度等级较高。应用所建模型进行了2006~2010年客运周转量预测,并对照2006年实际运量数据,证明预测结果精度较高。最后讨论了GM(1,1)预测模型在运量预测实际应用中的指标选取、模型检验和应用范围。     

利用CIVIL 3D进行海港工程疏浚设计方法研究

本文在南方某海港工程港池航道工程设计中引入BIM正向设计,利用CIVIL 3D建立了地形曲面和地质曲面模型,建立采样线,对地形曲面、设计曲面、地质曲面进行采样;用断面法进行疏浚工程量计算,用程序自带网格施工图及其他软件等多种方法进行校核以验证计算准确性;通过材质定义,计算不同土类疏浚量并在断面图中表示;在设计完成后,按...     

斜井套管射孔完井出砂预测模型的建立

针对目前进行的比较多的套管射孔完井,以线弹性理论为基础,通过分析定向油井井眼围岩岩石受力的应力状态和射孔孔壁应力分布,考虑井眼围岩应力对射孔孔壁应力状态的影响;根据Moh-Coulomb准则和Drucker-Prager准则分别提出两个地层稳定性指数的概念;并利用孔壁应力分布和Drucker-Prager破坏准则所建立的出砂预测模型;通过对W1油井的出砂预测,验证该模型预测结果与油井实际情况较吻合。     

长线法生产梯形轨枕的质量控制研究

梯形轨枕是地铁交通中的主要承重部件,它为列车及轨道结构提供平台并将集中荷载均匀分布。为保证梯形轨枕产品国产化生产效率,满足施工进度需求,研制适用于长线法工艺的可滑动模具。并通过采取模板预留反拱、对称张拉受力、更改套管定位方式等措施,严格控制产品拱度、扭曲、道钉位置。结合北京地铁7号线梯形轨枕的生产,介绍改进后长线法施工过程中的关键施工工艺及质量控制要点。实践证明通过采取上述措施,梯形轨枕产品质量大幅提高。     

An integrated methodology for the design of mooring systems and risers

Traditionally, the design of mooring lines and risers of floating production systems (FPS) has been performed separately, by different teams, employing uncoupled analysis tools that do not consider the nonlinear interaction between the platform hull and the mooring lines and risers. Design processes have been focused on fulfilling the design criteria of the respective component (mooring/riser) alone, with few or no consideration to the other component, and little interaction between the design teams. Nowadays the importance of employing analysis tools based on coupled formulations is widely recognized, and analysis strategies have been proposed to consider feedback between mooring lines and risers within their respective design processes.In this context, this work details a proposal of one single and fully integrated design methodology for mooring systems and risers for deep-water FPS. In this methodology, the design stages of both risers and mooring lines are incorporated in a single spiral, allowing the full interaction of different teams; mooring design implicitly considers the riser integrity, and vice-versa, leading to gains in efficiency and cost reduction.Different analysis strategies are employed, taking advantage of uncoupled and coupled numerical models. The models generated at the initial/intermediate design stages can be reused in subsequent stages: simpler models are used in the initial stages, and more refined models are gradually introduced, to reach an ideal balance between computational cost and accuracy of results. In the advanced stages, the exchange of information between mooring/riser also allows the definition of criteria for the selection of governing/critical loading cases to be revised and verified in detail. This leads to the reduction of the original loading case matrix, allowing a feasible use of time-consuming fully coupled analysis.Results of a case study illustrating the application of some of the main processes of the methodology are included.