政府与高校合作创新产学合作模式之初探

在新的社会主义经济形式和高校自主办学权不断扩大的情况下,除了企业和高校的合作之外,作为中国政治和经济生活中主体的政府能否积极、有效地参与到产学研合作的实践中来?这的确是一个值得深入研究的课题。文中结合广东省交通厅与广东交通职业技术学院合作运作广东省机动车驾驶培训教练员考试中心的例子对政府与高校创新合作的产学结合模式进行了初步探讨。     

关于天津临港产业区总体规划的构想

从规划选址和建设规模、功能定位、平面布局、规划中的重点问题等四个方面,对临港产业区的总体规划构想进行了阐述。     

斜井套管射孔完井出砂预测模型的建立

针对目前进行的比较多的套管射孔完井,以线弹性理论为基础,通过分析定向油井井眼围岩岩石受力的应力状态和射孔孔壁应力分布,考虑井眼围岩应力对射孔孔壁应力状态的影响;根据Moh-Coulomb准则和Drucker-Prager准则分别提出两个地层稳定性指数的概念;并利用孔壁应力分布和Drucker-Prager破坏准则所建立的出砂预测模型;通过对W1油井的出砂预测,验证该模型预测结果与油井实际情况较吻合。     

长线法生产梯形轨枕的质量控制研究

梯形轨枕是地铁交通中的主要承重部件,它为列车及轨道结构提供平台并将集中荷载均匀分布。为保证梯形轨枕产品国产化生产效率,满足施工进度需求,研制适用于长线法工艺的可滑动模具。并通过采取模板预留反拱、对称张拉受力、更改套管定位方式等措施,严格控制产品拱度、扭曲、道钉位置。结合北京地铁7号线梯形轨枕的生产,介绍改进后长线法施工过程中的关键施工工艺及质量控制要点。实践证明通过采取上述措施,梯形轨枕产品质量大幅提高。     

An integrated methodology for the design of mooring systems and risers

Traditionally, the design of mooring lines and risers of floating production systems (FPS) has been performed separately, by different teams, employing uncoupled analysis tools that do not consider the nonlinear interaction between the platform hull and the mooring lines and risers. Design processes have been focused on fulfilling the design criteria of the respective component (mooring/riser) alone, with few or no consideration to the other component, and little interaction between the design teams. Nowadays the importance of employing analysis tools based on coupled formulations is widely recognized, and analysis strategies have been proposed to consider feedback between mooring lines and risers within their respective design processes.In this context, this work details a proposal of one single and fully integrated design methodology for mooring systems and risers for deep-water FPS. In this methodology, the design stages of both risers and mooring lines are incorporated in a single spiral, allowing the full interaction of different teams; mooring design implicitly considers the riser integrity, and vice-versa, leading to gains in efficiency and cost reduction.Different analysis strategies are employed, taking advantage of uncoupled and coupled numerical models. The models generated at the initial/intermediate design stages can be reused in subsequent stages: simpler models are used in the initial stages, and more refined models are gradually introduced, to reach an ideal balance between computational cost and accuracy of results. In the advanced stages, the exchange of information between mooring/riser also allows the definition of criteria for the selection of governing/critical loading cases to be revised and verified in detail. This leads to the reduction of the original loading case matrix, allowing a feasible use of time-consuming fully coupled analysis.Results of a case study illustrating the application of some of the main processes of the methodology are included.     

诱增交通量特点、发展阶段及计算模型分析

分析了诱增交通量的特点和发展阶段，根据交通需求预测理论对诱发交通量预测方法进行了初步探讨，提出了诱增交通量的计算模型。结合实例分析了诱增交通量的定量计算。     

整车试制阶段的电器故障诊断方法

以整车装车与跑车验证案例为背景，讨论汽车开发过程中汽车电器故障诊断的方法，阐述如何应用零部件置换原则来分析故障的重要性等级（significance）。     

基于浑沌神经网络的动态交通量预测方法研究

介绍了目前国内外道路交通量预测的方法、特点及实际的预测效果.由于城市道路交通的复杂性,使得一些现有交通量预测方法的预测精度不高.针对这些问题,应用混沌神经网络,建立了城市道路交叉口出口交通量的浑沌神经网络预测模型,并与传统的BP神经网络预测结果对比,表明此模型具有较好的预测效果.     

废橡胶粉改性骨架密实型沥青混合料的设计方法

在主骨料空隙填充法(CAVF)的基础上,提出了废橡胶粉改性骨架密实型沥青混合料(CRM-SDAM)的配合比设计方法,即骨架嵌挤密实体积法。室内试验结果表明,采用此种方法简便可行,获得的改性沥青混合料具有适宜的体积参数和良好的高温性能及水稳定性。     

路用高弯拉强度混凝土配制与施工技术要点

主要论述了高弯拉强度混凝土对水泥、集料、掺合料及外加剂等原材料的技术要求;提出路用高弯拉强度混凝土配合比设计原则与方法,并给出推荐的配合比范围;论述了高弯拉强度混凝土拌和、运输、摊铺、切缝和养护等施工过程中的技术控制要点。