Multivariable speed synchronisation for a parallel hybrid electric vehicle drivetrain

In this article, a new drivetrain configuration of a parallel hybrid electric vehicle is considered and a novel model-based control design strategy is given. In particular, the control design covers the speed synchronisation task during a restart of the internal combustion engine. The proposed multivariable synchronisation strategy is based on feedforward and decoupled feedback controllers. The performance and the robustness properties of the closed-loop system are illustrated by nonlinear simulation results.     

船舶机舱电动往复机械的维护特点

通过对船舶机舱最常见的3种电动往复机械进行分析,得出电动往复机械维护管理的主要特点,并进一步弄清了3种电动往复机械的结构特点与工作原理。比较3种电动往复机械的维护特点,不仅对船舶机舱设备的日常维护管理起到一定的促进作用,还可以在一定程度上提高轮机管理人员的专业知识。     

Strategies to achieve deep reductions in metropolitan transportation GHG emissions: the case of Philadelphia

ABSTRACT

This paper investigates strategies that could achieve an 80% reduction in transportation emissions from current levels by 2050 in the City of Philadelphia. The baseline daily lifecycle emissions generated by road transportation in the Greater Philadelphia Region in 2012 were quantified using trip information from the 2012 Household Travel Survey (HTS). Emissions were projected to the year 2050 accounting for population growth and trends in vehicle technology for both the Greater Philadelphia Region and the City of Philadelphia. The impacts of vehicle technology and shifts in travel modes on greenhouse gas (GHG) emissions in 2050 were quantified using a scenario approach. The analysis of 12 different scenarios suggests that 80% reduction in emissions is technically feasible through a combination of active transportation, cleaner fuels for public transit vehicles, and a significant market penetration of battery-electric vehicles. The additional electricity demand associated with greater use of electric vehicles could amount to 10.8 TWh/year. The use of plug-in hybrid electric vehicles (PHEV) shows promising results due to high reductions in GHG emissions at a potentially manageable cost.     

About the possibilities of using the renewable energy power sources on railway transport

Several electrification systems based on renewable energy power sources (first of all, solar energy) are discussed in respect to their applicability to railway transport and, in particular, to suburban electric trains. Two systems are considered with basic technical details and economic estimation, both including the onboard bank of batteries and the photovoltaic converters (PVC) of solar energy for compensation of energy expenses, which could be positioned either on stations or on wagon's roofs. Sun‐tracking systems and their effect on the solar energy conversion efficiency are discussed in application to stationary and moving PVC platforms. An analysis made shows that introduction of the “green” systems discussed will not only have positive ecological impact, but also can bring a notable economical effect even with today's components, while it could be considerably greater with the usage of new PVCs, which are being developed by the authors. Copyright © 2011 John Wiley & Sons, Ltd.     

炭纤维复合叠层铝板的制备工艺和实验研究

综合评论了从ＡＲＡＬＬ发展到新一代复合叠层铝合金板的进展。实验研究了新一代的叠层铝板－－炭纤维复合叠层铝板的制备工艺，并提供了所制备的炭纤维复合叠层铝板的性能。结果表明：这种铝板具有ＡＲＡＬＬ板的各种优点，能改进ＡＲＡＬＬ的一些缺点，它的各种性能指标皆优于铝合金板，因此可望取代高强度铝合金板而广泛应用于各类工程项目之中。     

Fault classification method for the driving safety of electrified vehicles

A fault classification method is proposed which has been applied to an electric vehicle. Potential faults in the different subsystems that can affect the vehicle directional stability were collected in a failure mode and effect analysis. Similar driveline faults were grouped together if they resembled each other with respect to their influence on the vehicle dynamic behaviour. The faults were physically modelled in a simulation environment before they were induced in a detailed vehicle model under normal driving conditions. A special focus was placed on faults in the driveline of electric vehicles employing in-wheel motors of the permanent magnet type. Several failures caused by mechanical and other faults were analysed as well. The fault classification method consists of a controllability ranking developed according to the functional safety standard ISO 26262. The controllability of a fault was determined with three parameters covering the influence of the longitudinal, lateral and yaw motion of the vehicle. The simulation results were analysed and the faults were classified according to their controllability using the proposed method. It was shown that the controllability decreased specifically with increasing lateral acceleration and increasing speed. The results for the electric driveline faults show that this trend cannot be generalised for all the faults, as the controllability deteriorated for some faults during manoeuvres with low lateral acceleration and low speed. The proposed method is generic and can be applied to various other types of road vehicles and faults.     

基于LabVIEW和PXI的电力机车电气综合性能测试系统

介绍了电力机车电气综合性能测试平台的基本组成,从硬件平台、软件设计等方面详细分析了基于LabVIEW和PXI的电力机车电气综合性能测试系统的开发应用。     

中型低压大功率电机轴承温升测试及修理措施

文章主要讲述中型低压大功率电机轴承温度的测量方法和测试过程中轴承温升的基本规律。并对中型低压大功率电机轴承温度测试应注意的问题和温升的基本规律进行了简要分析。对电机轴承温升过高提出修理改进措施，从而使人们对中型低压大功率电机测试和使用过程中轴承温升控制有所参考和依据。     

桥面物理除冰雪加热功率与环境因素关系分析

为解决化学融雪剂腐蚀桥梁结构和污染环境的问题，提出桥面敷设加热电缆方式除冰雪技术方案，以30m预应力混凝土T梁桥、沥青混凝土桥面为分析对象，进行了瞬态热分析和稳态热分析，系统研究了在桥面加热升温和稳态融雪节段加热功率与环境温度和环境风速的关系。经分析可知桥面加热过程可分为滞后、升温和稳态三个阶段，得出了一些有意义的结论，可为桥面敷设加热电缆除冰雪设计提供理论参考。     

Network equilibrium models with battery electric vehicles

The limited driving ranges, the scarcity of recharging stations and potentially long battery recharging or swapping time inevitably affect route choices of drivers of battery electric vehicles (BEVs). When traveling between their origins and destinations, this paper assumes that BEV drivers select routes and decide battery recharging plans to minimize their trip times or costs while making sure to complete their trips without running out of charge. With different considerations of flow dependency of energy consumption of BEVs and recharging time, three mathematical models are formulated to describe the resulting network equilibrium flow distributions on regional or metropolitan road networks. Solution algorithms are proposed to solve these models efficiently. Numerical examples are presented to demonstrate the models and solution algorithms.