回淤和沉降严重的护岸抛石的质量检验方法

由于护岸抛石中存在的回淤和沉降现象,在质量检验中如果按常规的检验方法验收,很难真实反映抛石的厚度。为了能真实反映抛石的实际质量,研究了护岸抛石在回淤和沉降的情况下质量检测方法,得出“实时检测+抛石沉降量”检测其厚度、再通过抛后旁扫检测其覆盖范围的检验方法。     

Locating rental stations and bikeways in a public bike system

To determine the spatial distribution of rental stations and bikeways in a public bike system, this paper proposes a facility location and network design model. The model is developed as a multi-objective programing problem that considers four objectives (minimizing cyclist risk, maximizing cyclist comfort, minimizing adverse impacts on traffic and maximizing service coverage) and multiple constraints (monetary budget, network connectivity, station spacing, bikeway types, station number and value ranges of decision variables). The ε-constraint method solves the programing problem for the public bike system in Daan District, Taipei City, Taiwan. The nine non-dominated alternatives generated are all markedly better than existing locations of rental stations and bikeways. Scenario analysis results indicate that increasing the construction budget for bikeways significantly improves cyclist safety and comfort whilst increasing the adverse impact on traffic. Planners can use this model to develop public bike systems that spatially integrate rental stations and bikeway networks.     

Analysis of the Circulation System of a Slurry Shield and the Muck Carrying Ability of a Dredging Pipe北大核心CSCD

The circulation system of a slurry shield is composed of a transportation system and a processing system.For shield construction, correct selection of the circulation system for the slurry shield is directly related to construc-tion speed. Using the Nanjing Yangtze tunnel as an example, the material balance calculation of the circulation sys-tem, sieving effect analysis, and analysis of the muck carrying ability of the dredging pipe are conducted for various strata. The practical results show that above mentioned calculations and analysis method provide a good reference for the proper selection of a slurry separation system and dredge pipe. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

柳江红花二线船闸输水系统布置与水力学模型试验研究

红花二线船闸是广西西江黄金水道首批重点建设项目,是提升柳江及西江通航能力、实现西江亿吨黄金水道的重要工程,其闸室规模与三峡船闸一致、工作水头近20 m、输水能量巨大。结合工程特点,选择了闸底长廊道侧支孔输水系统,设计了输水系统具体布置,并提出采用汇合廊道改善单边阀门运行输水流态的措施。通过比尺为1∶30的物理模型试验,对不同阀门运行工况下输水系统水力特性、闸室船舶停泊条件、进出水口水流条件等开展研究,推荐了使水力指标满足规范和设计要求的阀门开启方式。     

蜀山泵站枢纽船闸输水系统水力学模型试验

蜀山泵站枢纽船闸对引江济淮工程航运至关重要,是连通长江与淮河,确保引江济淮航运干线畅通的控制性工程,其闸室规模大、工作水头高、输水能量高,输水过程水力学问题是船闸设计的关键环节。结合工程地质和结构设计,船闸拟采用形式最为简单的闸墙长廊道侧支孔输水系统,输水过程船舶与船闸自身安全能否满足相关要求需要开展细致研究。通过比尺为1∶25的物理模型试验,对其输水过程船舶停泊条件、水力特性及引航道水流条件开展研究。结果表明:在推荐的输水系统布置和阀门开启方式下,各项水力指标均能满足规范和设计要求。     

船舶岸电系统在集装箱码头的应用

靠港船舶岸电系统具有可以减少污染物排放和提高能源利用率的优点,正在我国港口大力推广。为探讨岸电系统在集装箱码头的应用前景,以大窑湾北岸某集装箱码头为例,利用仿真模型核算多种情景下2020年大窑湾北岸集装箱码头船舶使用岸电前后的碳排放量,并分析不同装卸效率对船舶的碳排放的影响。结果表明,集装箱码头使用岸电系统可实现低碳效益,提高装卸效率有利于船舶碳排放的减少,但应考虑提高装卸效率会引起装卸机械碳排放增加。     

景洪水力式升船机机械系统设计

结合景洪升船机的设计,对水力式升船机机械系统各子系统及部件的功能进行论述,对其结构和设计参数进行研究,并给出水力式升船机卷筒及同步系统、浮筒及动滑轮装置、钢丝绳组件和下水式承船厢的主要结构和设计参数。对水力式升船机浮筒的配重进行探讨,特别针对无间隙同步系统、承船厢充压对接密封装置提出新颖的结构,为同类工程设计提供参考。     

长江口北支中束窄工程对周边水动力及水质的影响

基于考虑水体斜压的MIKE3数值模型的HD模块和Ecolab模块,对长江口及附近海域水动力环境进行数值模拟,并将验证好的模型用于分析预测实施北支中束窄工程对周边水动力环境造成的影响。研究结果表明:中束窄工程围填后,北支流速均有一定程度的降低,北支上段汊口处受到南支涨潮的影响,涨急流速有增大趋势;北支束窄工程对盐度的影响趋势为北支区域盐度值有明显的降低,对枯季北支的盐度倒灌南支起到了明显的控制作用;工程实施后,北支河口处磷酸盐、无机氮与叶绿素a含量增加明显;北支中上段磷酸盐与无机氮平均浓度略有降低,而叶绿素a含量整体有上升趋势。工程围填对南支及外海区域的水动力特征及营养盐含量影响较小。     

FPSO单点系泊系统安装及回接技术

单点系泊系统作为浮式生产储油卸油装置（Floating Production Storage and Offloading,FPSO）的核心组成部分,需在FPSO进入安装现场之前完成安装,随后FPSO进入安装现场进行回接。以我国南海某具体工程项目为背景,全面、系统地介绍FPSO悬链腿单点系泊系统的安装及回接方法,并采用OrcaFlex分析软件对各个施工步骤进行相关的模拟分析。该单点系泊系统的整个安装过程可分为抓地锚安装、下段锚腿铺设、锚腿张紧、上段锚腿铺设、单点浮筒拖航及就位和锚系回接单点浮筒等6个阶段。     

A new approach for improving the performance of freight train timetabling of a single-track railway system

A new approach for improving the performance of freight train timetabling for single-track railways is proposed. Using the idea of a fixed-block signaling system, we develop a matrix representation to express the occupation of inter- and intra-station tracks by trains illustrating the train blocking time diagram in its entirety. Train departure times, dwell times, and unnecessary stopping are adjusted to reduce average train travel time and single train travel time. Conflicts between successive stations and within stations are identified and solved. A fuzzy logic system is further used to adjust the range of train departure times and checks are made to determine whether dwell times and time intervals can be adjusted for passenger and freight trains at congested stations to minimize train waiting times. By combining manual scheduling expertise with the fuzzy inference method, timetable efficiency is significantly improved and becomes more flexible.