振荡压实对桥梁结构物的影响研究

振荡压实是利用在材料厂中产生的快速交变剪应力使材料的颗粒重新排列而变得更加密实。通过振荡压实与振动压实对桥梁结构的振动的对比试验，分析了这2种作业方式对桥梁结构物的影响．论证了振荡压路机在桥梁压实中的优越性。     

大型风电过渡桩法兰制作安装工艺研究

对大型风力发电塔筒法兰的制作安装与平整度控制方法作了较为详尽的说明和分析。内容包括法兰的分片制作和整体合拢,法兰与塔筒的拼装焊接和法兰制作安装全过程对其平整度控制的相关内容等。经实践检验,证明此工艺方案具有实用、质量可靠、可操作性强和技术先进、合理等优点,并取得良好的经济效益。     

Experimental investigation of evaporation rate and exhaust emissions of diesel engine fuelled with cotton seed methyl ester and its blend with petro-diesel

An experimental study to measure the evaporation rates, engine performance and emission characteristics of cotton seed biodiesel (cotton seed oil methyl ester) and its blends in different volumetric proportions with diesel is presented. The thermo-physical properties of all the fuel blends have been measured and presented. Evaporation rates of neat cotton seed biodiesel, neat diesel and their bends have been measured under slow convective environment of air flowing with a constant temperature. Evaporation constants have been determined by using the droplet regression rate data. The neat fuels and fuel blends have been utilized in a test engine with different load conditions to evaluate the performance, combustion and emission characteristics of the fuels. The specific fuel consumption values of the two blends, viz. B25 and B75 are found to be same. At the highest load, B0 records the lowest CO volume followed by B100. From the observed evaporation, performance and emissions characteristics, it is suggested that a blend of B50 and B75 can be optimally used in standard diesel engine settings.     

桥梁模板施工技术应用性研究

桥梁模板是桥梁施工中的重要工具。通过搜集国内外桥梁模板资料,研究总结并提出解决模板工程在桥梁施工中存在各种问题的办法,将对提高工程质量、加快施工速度、提高劳动生产率、降低工程成本和实现桥梁工程的文明施工起到一定的推动作用。     

做好交通行业政务信息工作的研究

以山东省港航业政务信息工作为例，对如何做好交通行业政务信息工作进行研究。做好交通行业政务信息工作的关键是要根据交通行业的特点，构建交通政务信息网络；围绕港航行业管理内容，突出港航信息特色；同时也离不开领导的重视和支持。     

基于剩余充电电量的锂离子电池组容量快速估计方法

针对传统锂离子电池组容量确定方法存在的效率低、能耗高且只能离线应用等问题,提出一种基于电池剩余充电电量的锂离子电池组容量快速估计方法。首先,基于充电电压曲线一致性原理,以电池组内率先充电至充电截止电压的电池单体电压曲线为基准,通过电压曲线的平移缩放与线性插值计算出各单体电池的剩余充电电量与剩余充电时间,从而实现各单体电池的荷电状态(State of Charge, SOC)在线估计,在此基础上实现电池组容量的快速估计。其次,在电池单体模型的基础上建立电池组的仿真模型,并在全SOC区域上对模型参数进行分段辨识。通过所建立的仿真模型得到电池组的充放电曲线,并对电池组容量进行估计。最后,对4个单体串联而成的电池组进行充电试验。研究结果表明:仿真容量与估计容量误差为1.2%以内,验证了所提出的容量快速估计算法的有效性;利用所提方法估计出电池组容量与试验得到的电池组容量的误差为2.61%;该方法根据电池充电曲线的平移与缩放即可在线估计出电池组容量,可应用于新电池组容量的在线快速估计,能在保证3%估计误差的基础上将检测效率提高到传统方法的2倍以上。     

硅胶吸附管采集甲醇汽车尾气排放中甲醇的方法研究

文章主要研究了利用硅胶吸附管采集甲醇汽车尾气排放中甲醇的方法,对硅胶吸附管的规格、待测样品的浓度、采样参数等进行了详细的讨论及验证。研究表明,利用硅胶吸附管采集甲醇的过程中,很容易发生甲醇的穿透。随着硅胶颗粒装填数目的增加,甲醇的穿透率降低,实际吸附甲醇的效率增加。在采样流量相同时,待测样品浓度越高,甲醇的穿透率越高。在待测样品浓度相同时,采集流量越高,甲醇的穿透率越高。将硅胶吸附管串联,可以有效减少甲醇的穿透,提高吸附效率。     

高速三体船的研究与发展

对高速三体船的研究进展进行了综述,阐述了高速三体船的应用前景,归纳评述了有关的研究成果和尚存在的问题,并提出了关于这种新船型的若干研究方向。     

Improving train service reliability by applying an effective timetable robustness strategy

ABSTRACT

To avoid propagation of delays in dense railway timetables, it is important to ensure robustness. One strategy to improve robustness is to provide adequate amount of buffer times between trains. This study concerns how “scheduled minimum headways” should be determined in order to improve robustness in timetables. Scheduled minimum headways include technical minimum headway plus some buffer time. We propose a strategy to be implemented in timetables at the final stages of planning and prior to the operations. The main contributions of this study are 1) to propose a strategy where the size of the scheduled minimum headways is dependent on trains' travel times instead of a fixed-sized time slot and it is called “travel time dependent scheduled minimum headways” or TTDSMH, 2) to evaluate the effects of the new strategy on heterogeneity, speed, and the number of trains in timetables, 3) to show that a simple strategy can improve robustness without imposing major changes in timetables. The strategy is implemented in an Mixed Integer Linear Programming framework for timetabling and tested for some problem instances from Sweden. Results show that TTDSMH can improve robustness. The proposed strategy can be applied in intelligent transportation tools for railway timetabling.     

柴油发动机掺烧生物柴油的经济性研究

为了更好地评价柴油机燃用生物柴油的经济性,分析了生物柴油和0#石化柴油的理化性质,分别对生物柴油的体积分数为0.2,0.5,1的B20、B50、B100 3种燃料和0#柴油在495Q3柴油机上进行了试验。试验结果显示燃用3种燃料的燃油消耗率比0#柴油在中小负荷时平均增加5.30%,9.65%,19.04%,大负荷时平均增加2.86%,4.75%,9.64%;能量等值折合油耗率在中小负荷时平均增加2.65%,2.63%,5.74%,大负荷时平均降低0.26%,1.97%,4.80%。