Dynamic simulation of train–truck collision at level crossings

Trains crashing onto heavy road vehicles stuck across rail tracks are more likely occurrences at level crossings due to ongoing increase in the registration of heavy vehicles and these long heavy vehicles getting caught in traffic after partly crossing the boom gate; these incidents lead to significant financial losses and societal costs. This paper presents an investigation of the dynamic responses of trains under frontal collision on road trucks obliquely stuck on rail tracks at level crossings. This study builds a nonlinear three-dimensional multi-body dynamic model of a passenger train colliding with an obliquely stuck road truck on a ballasted track. The model is first benchmarked against several train dynamics packages and its predictions of the dynamic response and derailment potential are shown rational. A geometry-based derailment assessment criterion is applied to evaluate the derailment behaviour of the frontal obliquely impacted trains under different conditions. Sensitivities of several key influencing parameters, such as the train impact speed, the truck mass, the friction at truck tyres, the train–truck impact angle, the contact friction at the collision zone, the wheel/rail friction and the train suspension are reported.     

浅谈分体式后扰流板的设计与应用

文章主要阐述了后扰流板总成注塑成型工艺及其结构设计,简单介绍多种后扰流板的结构设计及其工艺,结合成本、外观质量、设计强度等方面,详细介绍一种分体式后扰流板的结构设计方案.     

高顶双卧重型卡车改装设计

论述了汽车改装业的现状和发展趋势,详细介绍了东风EQ1411型高顶双卧重型卡车车身改装设计的原则、过程和特点。     

Failure mode and effects analysis of dual levelling valve airspring suspensions on truck dynamics

Failure mode and effects analysis are performed for a dual levelling valve pneumatic suspension to determine the effect of suspension failure on tractor–semi-trailer dynamics, using a detailed model of suspension pneumatics coupled with a truck dynamic model. A key element of failure analysis in suspensions with one or two levelling valves is determining the effect on the vehicle body roll when one or more failures occur. The failure modes considered are mainly the suspension pneumatic components, including clogged levelling valve, bent control rod, disabled lever arm, and punctured or leaking connectors and pipes. The pneumatic suspension is modelled in AMESim, with critical parameters established through component testing. Upon validating the AMESim component model experimentally, the pneumatic suspension model is integrated into TruckSim for studying the consequences of suspension failure on truck dynamics. The simulation results indicate that the second levelling valve in a dual-valve arrangement brings a certain amount of failure redundancy to the system, in the sense that when one side fails, the other side can compensate for the failure. Equipping the trailer with dual levelling valves brings an additional stabilising effect to the vehicle in the event of tractor suspension failure.     

重型汽车低附着路面制动稳定性的仿真研究

文章利用trucksim重型汽车动力学仿真软件,对六轮双轴重型汽车在低附着路面左右车轮附着系数不一致情况下进行紧急制动的行驶工况进行了仿真研究。研究结果表明在低附着路面进行紧急制动时,对制动轮进行制动压力控制,有ABS控制的重型汽车比没有ABS控制的重型汽车具有更好地行驶稳定性。但在低附着路面上,有ABS控制的重型汽车比没有ABS控制的重型汽车的制动距离增加了很多,这对重型汽车的行车安全性非常不利。     

新型集装箱汽车衡称重技术与误差分析研究

为了对一辆集卡装载的2个20英尺集装箱进行分别称重,设计了新的汽车衡结构,推导出计算公式并进行实验验证,得到了一种可以保证作业安全且能为港口和货主接受的集装箱汽车衡称重方法。     

后置定子对喷水推进泵性能的影响规律研究

本文采用RNG k-ε模型对不同后置定子叶数的喷水推进泵性能进行数值模拟,首先采用4119桨进行数值验证,计算结果误差均在3%以内,可有效预报水动力学性能。基于现有模型喷水推进泵,分析其水动力学性能,对比不同叶数定子的喷水推进泵性能,分析其推力性能,发现随着定子叶数增加到11叶,推力增大了5.7%,随着叶数继续增加,推力降低,最终只提高了2.1%;对转子推力进行傅里叶分析,发现转子的频域特性并未发生变化;同时分析尾流场压力脉动和湍动能分布,增加定子叶数可改善尾部流场的压力脉动,降低脉动值,随着叶数继续增大,脉动值又增加,其变化趋势与湍动能分布相同。通过掌握定子对喷水推进泵尾流场的影响特性,奠定喷水推进泵设计基础。     

多点后方交会法在地铁竖井联系测量中的应用

竖井联系测量工作的可操作性及准确性对矿山法隧道施工至关重要.以广州市轨道交通21号线某标段2号隧道为研究对象,基于施工竖井结构及现场环境的特殊性,对用于辅助测量的4根钢丝距离和角度进行观测,再利用多点后方交会及钢丝坐标传递原理实现井上和井下坐标传递.研究表明,在隧道开挖至40～60 m、100～150 m、贯通前150...     

竖直式垃圾压实器压头形状优选

针对竖直式垃圾压实器的设计,阐明了反映垃圾压缩率的压头形状优化目标以及基于加权平均法的综合评价方案,构建了加权平均法的分析模型并确定各指标的加权系数.然后提出了圆形、方形、推铲形和楔形四种压头形式,分别建立对应的垃圾压缩有限元模型,运用加权评分的方法,选择出最优的压头形状,为压实器的结构设计提供了依据.     

自卸车举升机构三角臂拓扑优化设计

采用拓扑优化技术对某自卸车举升机构三角臂进行了拓扑优化设计,使得优化后结构相对于原结构质量减轻约20%,同时刚度大大增强。