滑床板摩擦力对尖轨不足位移的影响

为解决道岔尖轨不足位移问题,根据尖轨的特殊结构外形、受力特性和扳动机理,建立尖轨不足位移计算仿真模型,分析不同滑床板表面摩擦系数取值下尖轨不足位移的变化。结果表明:摩擦力是导致尖轨产生不足位移的主要原因;尖轨不足位移随滑床板摩擦系数的增加而增大,基本成线性递增关系;最后牵引点距尖轨跟端间间距越大,摩擦系数对不足位移的影响也越大。减小摩擦力和优化牵引点间距能够较好地控制尖轨不足位移。提出设置滚轮式滑床板方案,将轨底与滑床板间的滑动摩擦转化为滚动摩擦,并优化滚轮式滑床板布置方式,进一步减小了尖轨不足位移。     

时延网络控制系统的保性能控制研究

针对网络控制系统中存在的不确定时延，在传感器采用时间驱动，执行器与控制器采用事件驱动、时延小于一个采样周期的条件下，将网络控制系统建模为一类具有不确定性的线性离散系统并且其标称模型可控。围绕该标称模型，利用Lyapunov方法，基于相应的LMI可行解，给出网络控制系统保性能控制律的设计方法。通过仿真证明了该方法的有效性。     

建设节约型社会解决三峡库区水污染研究

通过对三峡库区水污染严重性的综述,说明水资源总量控制的重要性和综合防治水污染的紧迫性.对人们自觉的改变用水习惯,增强节水减污意识,保护自然资源,优化生态环境,建设节约型社会,循环经济的实施,保持国民经济的可持续发展有着重要的现实意义.此外,笔者还提出了改善库区水污染的若干建议和具体措施.     

高强钢筋混凝土非线性力学模型研究

针对高强钢筋混凝土非线性分析，对非线性分析中裂缝的模拟、钢筋混凝土材料本构关系及其非线性问题求解方法的改进进行研究，提出了适用于高强混凝土的本构曲线，并将混合法用于非线性问题，为高强钢筋混凝土梁非线性分析提供了理论基础。     

支持协同设计的船舶设计过程模型研究

船舶设计过程模型是在网络环境下开展船舶并行和协同设计系统的基础.本文根据船舶设计的特点,提出了将船舶设计过程按照项目、设计任务和设计活动三个层次进行分解的方法,并给出了船舶设计过程模型形式化定义.该模型明确了设计任务间的并行、顺序和协同关系,可以直接按设计任务构成活动网络图进行规划、分析、管理等工作,使设计过程具有良好的可变更性和可控性.     

The association of the population recruitment of gulf menhaden, Brevoortia patronus, with Mississippi River discharge

Gulf menhaden, Brevoortia patronus, which constitutes a major industrial reduction fishery in the USA, spawn across the northern Gulf of Mexico with a focus of spawning about the Mississippi Delta. This species is estuarine dependent; adults spawn over the continental shelf and their larvae are transported, by mechanisms that are presently not well understood, to estuarine nursery areas. Larval gulf menhaden, along with some other surface oriented larval fishes, appear to aggregate along the Mississippi River plume front, while evidence of the ecological consequences of this aggregation in terms of the feeding, growth, and survival of larvae is ambiguous. On an annual scale, Mississippi River discharge is negatively associated with numbers of half year old recruits. Discharge of the Mississippi River and the population recruitment of gulf menhaden may be plausibly linked through the action of the river's plume and its front on the shoreward transport of larvae. Greater river discharge results in an expansive plume that might project larvae farther offshore and prolong the shoreward transport of larvae. An indirect, decadal scale, positive response of recruitment and river discharge is possible, but not certain. Recruitment became elevated after 1975 when river discharge increased and became highly variable. This response might owe to enhanced primary and secondary production driven by nutrient influx from the Mississippi River.     

自适应神经网络用于船舶动力定位系统

船舶动力定位（DP）采用一种控制系统驱动装在船上的侧推器和尾部推进器或者几个全回转的推进器，使船定位在海平面的要求位置上。船受到风、浪及流等海洋环境力的作用时会漂移离开原位置，传统的控制方法是采用PID（比例、积分、微分）反馈控制。顾和李（1994）提出了一种新的基于人工神经网络的控制方法，它具有许多优越性：①一个可随意调节的目标函数以适合不同的需求──定位精度高或节约定位能量后前馈控制并能自适应于不同的环境力变化包括非线性的波浪漂力；本文在目标函数中引入了与速度相关的项，从而提高控制质量。这一方法也可用于自动驾驶船舶沿设定的轨迹航行。计算机模拟结果表明本方法能达到很好的控制效果。     

Experimental ivnestigation on flow fields of viscous fluid around two-dimensional wings and comparison with computational results

To examine the flow field of a viscous fluid around the trailing edge of a wing with respect to the Kutta condition or the Joukowski hypothesis, an experimental investigation into the velocity fields around two-dimensional (2D) wings NACA0012 and NACA4412 was carried out using an X-type hot-wire anemometer in a wind tunnel and the method of colored milk injection in a circulating water channel. The results of these investigations revealed that the flow of a viscous fluid at the trailing edge of a 2D wing is tangential to the face on the pressure side, and that the flow is very slow or reversed on the suction side due to separation when the angle of attack is greater than 7.5°. By flow visualization, a Kármán vortex street was found in the wake of both wings (NACA0012 and NACA4412) when the angle of attack was 5°. These results show that the ordinary Kutta condition with respect to the direction of outflow at the trailing edge is not necessarily satisfied in a viscous fluid, but the Kutta condition with respect to the pressure at the trailing edge is satisfied as usual. Numerical results, which have been obtained as the solution of Reynolds-averaged Navier-Stokes equations, show good agreement with above-mentioned experimental results. Therefore, CFD (Computational Fluid Dynamics) simulation has proved to be very effective for studying steady viscous flow around the trailing edge of a 2D wing.     

流函数法在减径拔管上限分析中的应用

应用流函数法建立减径拔管的动可容速度场，用上限原理得出减径拔管的上限解，分析了摩擦状态，变形程度及相对壁厚等工艺参数对拉拔载荷的影响，从而得出最佳工艺参数。     

铅锌选矿废水治理技术研究

本文通过对甘洛县境内的铅锌选矿废水的测试、分析以及治理工艺路线的研究，提出了一套高效、简便、可行经济的铅锌选矿废水治理技术方案，对其中的主要工艺单元设计参数进行了特别研究。