道路沥青材料VOCs的指纹组分及其定量分析

深入开展沥青材料环境影响规律研究,是加快推进交通运输污染防治和绿色交通发展的重要手段之一。针对热拌沥青材料在使用过程中挥发性有机化合物（Volatile Organic Compounds,VOCs）释放量小、组分复杂且材料来源和环境因素依赖性强等难以定量表征的科学问题,开展包括不同沥青材料间VOCs公共组分、特有组分和超微量组分的VOCs全组分的特征研究。综合共计80种沥青材料的VOCs组分特征,提出并定义沥青材料VOCs的指纹组分。基于指纹组分的释放量-色谱峰面积的绘制,分别构建沥青材料VOCs中单一组分释放量和VOCs释放总量的计算方程。研究结果表明：不同沥青材料的VOCs释放差异显著,其组分信息和对应释放量均存在很强的原材料来源依赖性;沥青VOCs的指纹组分具有色谱峰面积大、组分纯、毒性强等特点,包括2-甲基戊烷、正己烷、3-甲基己烷、庚烷、2-甲基庚烷、丙酮、甲基丙烯醛、正丁醛、异戊醛、苯、甲苯和二硫化碳这12种物质;该系列指纹组分能够用于沥青材料VOCs的单一组分释放量和总释放量的快速准确分析;70A沥青、70B沥青、90A沥青、90B沥青和SBS改性沥青在160℃加热条件下的VOCs释放总量分别为4.42,3.32,2.52,2.29,1.88 μg·g^-1,其中指纹组分的总释放量分别为3.00,2.33,2.01,1.75,1.44 μg·g^-1;70号沥青中释放量最多的物质包括正己烷、2-甲基戊烷和庚烷,其释放量均大于0.40 μg·g^-1;90号沥青和SBS改性沥青中,释放最多的物质为正丁醛,其中90A沥青中正丁醛的释放量高达0.76 μg·g^-1。     

哈尔滨市城市交通拥堵原因及解决措施

城市交通拥堵问题表象在城市道路交通,其根源受城市的自然环境、气候、历史、规划以及市民岀行习惯等方面影响。全面、客观地分析总结了影响哈尔滨城市交通拥堵的原因,对解决城市交通拥堵问题进行了思考,并提出了建议和具体措施。     

传统项目管理模式在某高速公路工程中的应用

在介绍项目管理的概念和特点的基础上探讨传统的三元项目管理模式与其他新型项目管理模式的优缺点，结合某高速公路的项目管理实践，具体分析传统项目管理模式在实际工程中的应用情况和存在问题，为工程建设项目中全面引入新型项目管理方法提供了参考。     

Environmental and transport effects of warehouse relocationing: evidence from Norway

Reducing traffic volumes and CO2-emissions from freight transport has proven difficult in many countries. Although the increasing suburbanization of warehouses is seen as a relevant land use trend, comprehensive analyses of their impact remain scarce. This study uses real data in modeling transport, costs, environmental and modal effects from warehouse relocations around Oslo and Trondheim (Norway). Results indicate that for Oslo, traffic performance (ton-km), CO2-emissions, and transport costs increase following warehouse suburbanization. For Trondheim, transport performance and CO2-emissions increase less, while transport costs decrease marginally. We conclude that specific case characteristics (geography and trade patterns) are important in determining the strength and direction of effects, and expect that common concomitant developments (warehouse centralization and consolidation) would lead to more pronounced results. Our findings confirm some, but challenge other, findings from the relatively scarcely literature available. Finally, the study's more general insights and observations can help advance similar analyses beyond Norway.     

Geometric design safety estimation based on tire–road side friction

A closed-loop drive–vehicle–road–environment system (DVRES) model was established using Adams/Car and Matlab/Simulink. Dynamic responses of lateral tire forces based on tire–road side friction and road geometric characteristics are used to investigate vehicle side slip for geometric design safety estimation. The root mean square, the maximum values of lateral tire forces, comfort limit on curves and vehicle trajectories are used to quantify the safety margin of side friction. The simulation results show that the safety margins of lateral tire forces for radius, operating speed and superelevation rate were 18.2%, 19.3% and 17.6%, respectively, to guarantee good vehicle lateral reliability and ride comfort, while lower speeds are optimal in wet and slippery roads. Finally, a case study was conducted to illustrate the analysis of road design safety, and on-site experiment testing further validated the accuracy and reliability of the closed-loop DVRES model.     

The impact of major road developments on the spheres of urban influence of Japanese cities

This study aims to measure the impact of major road developments on the spheres of urban influence of Japanese cities.First, the sphere of urban influence is defined by application of an individual behavior model. The model explains the number of trips to representative cities in regions from the residential place of each individual using the following factors; the attractiveness of cities, the travel time to cities and the individual's free time. Development of major roads shortens the travel time, and this causes the change in the sphere of urban influence. The model we propose has the structure to explain this phenomenon.Second, this method is applied to all of Japan where expressways are now being rapidly constructed and, how they change spheres of urban influence is explained. In the application, as a measure of attractiveness of cities, population, commercial and industrial activity, etc. are considered. From these points of view, the impacts of construction of expressways in Japan are estimated.     

泡沫沥青冷再生施工技术节能减排效益分析

泡沫沥青冷再生施工作为一种路面废旧材料再生利用新型冷再生技术,其混合料除了具有良好的路用性能,施工中还可以起到明显的节能减排作用,是发展循环经济、创建环境友好节约型社会的重要举措,目前已开始得到应用和推广;通过对泡沫沥青冷再生施工技术节能效益分析,了解其节约资源、保护环境、减少污染、降低造价等优点。     

Tradable credits for managing car travel: a review of empirical research and relevant behavioural approaches

Recently, there has been a surge of interest in Tradable Credits (TC) as an alternative measure to manage the growth of personal car use. This paper summarises the results and methodologies of studies that have sought to anticipate the behavioural responses to several proposed TC schemes that target personal travel. In a critical reflection on this work and in an attempt to inspire future research, we argue that future empirical studies on TC behaviours can greatly benefit from insights from the fields of behavioural economics and cognitive psychology. Therefore, in the second part of the paper, we bring together behavioural concepts from these fields that are relevant in a TC decision-making context. Based on observations from current TC studies and the behavioural mechanisms identified in the second part of the paper, we propose promising directions for future research on understanding the impact of TC on personal car travel.     

高速公路改扩建工程中的环境保护

通过对高速公路改扩建工程环境保护的研究,文章首先分析改扩建工程中环境保护的必要性,并对高速公路改扩建工程中环境保护的具体内容进行分析,重点探讨高速公路改扩建工程中环境保护的具体应用,对某高速公路改扩建案例的深入分析,提出四大环境保护措施。