Modeling the impacts of mandatory and discretionary lane-changing maneuvers

In this paper, a novel mesoscopic multilane model is proposed to enable simultaneous simulation of mandatory and discretionary lane-changing behaviors to realistically capture multilane traffic dynamics. The model considers lane specific fundamental diagrams to simulate dynamic heterogeneous lane flow distributions on expressways. Moreover, different priority levels are identified according to different lane-changing motivations and the corresponding levels of urgency. Then, an algorithm is proposed to estimate the dynamic mandatory and discretionary lane-changing demands. Finally, the lane flow propagation is defined by the reaction law of the demand–supply functions, which can be regarded as an extension of the Incremental-Transfer and/or Priority Incremental-Transfer principles. The proposed mesoscopic multilane cell transmission model is calibrated and validated on a complex weaving section of the State Route 241 freeway in Orange County, California, showing both the positive and negative impact of lane changing maneuvers, e.g., balancing effect and capacity drop, respectively. Moreover, the empirical study verifies that the model requires no additional data other than the cell transmission model does. Thus, the proposed model can be deployed as a simple simulation tool for accessing dynamic mesoscopic multilane traffic state from data available to most management centers, and also the potential application in predicting the impact of traffic incident or lane control strategy.     

Validating and improving public transport origin–destination estimation algorithm using smart card fare data

Smart card data are increasingly used for transit network planning, passengers’ behaviour analysis and network demand forecasting. Public transport origin–destination (O–D) estimation is a significant product of processing smart card data. In recent years, various O–D estimation methods using the trip-chaining approach have attracted much attention from both researchers and practitioners. However, the validity of these estimation methods has not been extensively investigated. This is mainly because these datasets usually lack data about passengers’ alighting, as passengers are often required to tap their smart cards only when boarding a public transport service. Thus, this paper has two main objectives. First, the paper reports on the implementation and validation of the existing O–D estimation method using the unique smart card dataset of the South-East Queensland public transport network which includes data on both boarding stops and alighting stops. Second, the paper improves the O–D estimation algorithm and empirically examines these improvements, relying on this unique dataset. The evaluation of the last destination assumption of the trip-chaining method shows a significant negative impact on the matching results of the differences between actual boarding/alighting times and the public transport schedules. The proposed changes to the algorithm improve the average distance between the actual and estimated alighting stops, as this distance is reduced from 806 m using the original algorithm to 530 m after applying the suggested improvements.     

基于群决策层次理论的预防性养护方案决策

基于高速公路预防性养护决策方案选择的特性,使用群决策理论的层次分析法,通过对决策组成员意见的集合,得到了各成员动态权重,减少主观误差,提高决策方案结果的客观可靠性。通过案例,将措施费用、行车特征、技术因素、施工因素等作为目标层,对4种备选方案进行分析,得出最佳措施。案例结果证明群决策方法的有效性与可靠性,为选择合理的养护措施提供参考。     

Dynamic demand estimation and prediction for traffic urban networks adopting new data sources

Nowadays, new mobility information can be derived from advanced traffic surveillance systems that collect updated traffic measurements, both in fixed locations and over specific corridors or paths. Such recent technological developments point to challenging and promising opportunities that academics and practitioners have only partially explored so far.The paper looks at some of these opportunities within the Dynamic Demand Estimation problem (DDEP). At first, data heterogeneity, accounting for different sets of data providing a wide spatial coverage, has been investigated for the benefit of off-line demand estimation. In an attempt to mimic the current urban networks monitoring, examples of complex real case applications are being reported where route travel times and route choice probabilities from probe vehicles are exploited together with common link traffic measurements.Subsequently, on-line detection of non-recurrent conditions is being recorded, adopting a sequential approach based on an extension of the Kalman Filter theory called Local Ensemble Transformed Kalman Filter (LETKF).Both the off-line and the on-line investigations adopt a simulation approach capable of capturing the highly nonlinear dependence between the travel demand and the traffic measurements through the use of dynamic traffic assignment models. Consequently, the possibility of using collected traffic information is enhanced, thus overcoming most of the limitations of current DDEP approaches found in the literature.     

城市大型医院周边道路交通问题剖析及改善对策——以深圳市为例

为了合理科学组织医院周边及内部交通,避免重现目前深圳大型医院周边普遍存在的交通拥堵、停车困难、进院车辆排队、的士乘坐不便等交通问题,以深圳市为例,分析现状大型医院周边存在的道路交通问题和产生原因,提出完善周边道路交通设施、大力发展公共交通、合理规划医院布局、建立科学有效的交通组织体系等改善对策.     

混凝土在路桥桩基施工中的作用及技术

路桥桩基混凝土施工中，为了保障灌注桩混凝土的质量，必须加强对准备工作及施工工艺的重视。通过对混凝土及其施工质量要求进行分析，探讨了混凝土在路桥桩基施工中的配合比、泵送等，并阐述了路桥桩基施工技术。     

大跨度连续钢桁架拱桥半悬臂拼装临时墩合理标高计算

当大跨度连续钢桁架拱桥采用支架法施工时，其临时支墩标高的合理设定对大桥的拼装线形和安全顺利拼装具有重要影响。结合钢桁梁桥的制造线形和架设过程中的钢梁线形变化，较系统地研究了临时墩的标高计算，推导了实用的计算公式。然后将该方法应用于某大跨度钢桁梁柔性拱组合结构桥梁，现场拼装和拆除结果表明：考虑预留50mm的设置方法，能更方便临时墩拆除，为类似桥梁施工计算提供借鉴。     

基于沉降差的填石路堤施工工艺与质量控制研究

结合南方地区填石路堤施工,通过填石路堤试验段研究,介绍了填石路堤的施工工艺和质量控制要求,并通过沉降差检测分析,说明了沉降差作为填石路堤质量控制指标的可行性,为同类工程提供参考.     

递进式项目化教学在公路工程造价课程中的应用

文章通过对现在高职教育改革状况的的分析,论证了道路桥梁技术专业改革的迫切性,主要介绍了递进式项目化教学在公路工程造价课程中的应用。     

State estimation in roll dynamics for commercial vehicles

Accurate lateral load transfer estimation plays an important role in improving the performance of the active rollover prevention system equipped in commercial vehicles. This estimation depends on the accurate prediction of roll angles for both the sprung and the unsprung subsystems. This paper proposes a novel computational method for roll-angle estimation in commercial vehicles employing sensors which are already used in a vehicle dynamic control system without additional expensive measurement units. The estimation strategy integrates two blocks. The first block contains a sliding-mode observer which is responsible for calculating the lateral tyre forces, while in the second block, the Kalman filter estimates the roll angles of the sprung mass and those of axles in the truck. The validation is conducted through MATLAB/TruckSim co-simulation. Based on the comparison between the estimated results and the simulation results from TruckSim, it can be concluded that the proposed estimation method has a promising tracking performance with low computational cost and high convergence speed. This approach enables a low-cost solution for the rollover prevention in commercial vehicles.