非稳态载荷对二维轮轨纯滚动接触应力和变形的影响

为了揭示轮轨波状表面与非稳态载荷的内在联系,利用有限元法,建立了二维弹塑性轮轨纯滚动接触计算模型,分析法向接触载荷波动值对钢轨残余应力、应变和变形的影响。模型中材料本构采用考虑棘轮效应的Jiang-Sehitoglu模型,非稳态仅考虑法向接触载荷的简谐变化,用弹塑性无限半空间表面上重复移动赫兹法向压力分布模拟反复纯滚动接触过程。发现非稳态法向接触载荷作用下产生同样波长的波状接触表面;随滚动次数的增加,残余应力增大,但很快趋于稳定,而残余应变也增大,但增大速率衰减;载荷波动值越大,波谷和波峰处的纵向残余应力越大,波谷处的轴向残余应力、残余剪应变和表面纵向位移越大,而波峰处的轴向残余应力、残余剪应变和表面纵向位移越小,波深越大。     

p型自适应有限元法及其在机车车辆强度分析中的应用

着重介绍了P型向适应有限元法的基本概念、典型算法、单元形函数特点及误差估计方法．并利用ANSYS软件提供的p单元对机车从动车轮的静强度进行了自适应分析：计算结果表明,利用该方法可提高分析效率,得到精度可靠的分析结果。     

长线法生产梯形轨枕的质量控制研究

梯形轨枕是地铁交通中的主要承重部件,它为列车及轨道结构提供平台并将集中荷载均匀分布。为保证梯形轨枕产品国产化生产效率,满足施工进度需求,研制适用于长线法工艺的可滑动模具。并通过采取模板预留反拱、对称张拉受力、更改套管定位方式等措施,严格控制产品拱度、扭曲、道钉位置。结合北京地铁7号线梯形轨枕的生产,介绍改进后长线法施工过程中的关键施工工艺及质量控制要点。实践证明通过采取上述措施,梯形轨枕产品质量大幅提高。     

Quasi-dynamic estimation of o–d flows from traffic counts: Formulation,statistical validation and performance analysis on real data

The paper proposes a “quasi-dynamic” framework for estimation of origin–destination (o–d) flow from traffic counts, under the assumption that o–d shares are constant across a reference period, whilst total flows leaving each origin vary for each sub-period within the reference period. The advantage of this approach over conventional within-day dynamic estimators is that of reducing drastically the number of unknowns given the same set of observed time-varying traffic counts. Obviously, the gain in accuracy depends on how realistic is the underlying assumption that total demand levels vary more rapidly over time than o–d shares. Firstly, the paper proposes a theoretical specification of the quasi-dynamic estimator. Subsequently, it proposes empirical and statistical tests to check the quasi-dynamic assumption and then compares the performances of the quasi-dynamic estimator of o–d flows with both classical off-line simultaneous dynamic estimators and on-line recursive Kalman filter-based estimators. Experiments are carried out on the real test site of A4–A23 motorways in North-Eastern Italy. Results confirm the acceptability of the assumption of quasi-dynamic o–d flows, even under the hypothesis of constant distribution shares for the whole day and show that the quasi-dynamic estimator outperforms significantly the simultaneous estimator. Data also suggest that using the quasi-dynamic estimates instead of the simultaneous estimates as historical o–d flows improves significantly the performances of the Kalman filter, which strongly depends of the quality of the seed o–d flows. In addition, it is shown that the aggregation of quasi-dynamic o–d estimates across subsequent time slices represents also the most effective way to obtain o–d estimates for larger time horizons (e.g. hourly estimates). Finally, a validation based on an hold-out sample of link flows (i.e. counts not used as inputs in the o–d estimation/updating process) revealed the quasi-dynamic estimator to be overall more robust and effective with respect to the other tested estimators.     

Experimental and finite element analysis of fatigue strength for 300 mm2 copper power conductor

The fatigue strength of a 300 mm² stranded copper conductor was investigated experimentally and by finite element (FE) analysis. An analytical model was also developed and validated. Wires taken from the outer layer of the conductor were fatigue tested in tension–tension loading and compared with similar data for wires taken from a 95 mm² conductor. The wire cross section was deformed due to the compacting process that was applied during fabrication. When corrected for stress concentrations due to the deformation the data for the two sets of wire fell within the same scatter-band. Full scale testing was carried out in a specially designed rig with constant tensile load and reversed displacement controlled bending with a fixed curvature variation. The loading is a simulation of the loading of a power cable hanging from a floating vessel through a bellmouth. Conductors were tested in two states; dry and lubricated. A finite element model was established for the copper conductor. The model was formulated by a combination of elastic beam and beam-contact elements that included the effects of friction. The effect of local bending due to contact forces was included in the model. Two contact conditions were investigated; the point (trellis) contact between adjacent layers of wire and the inline contact within each layer and between the first layer (centre wire) and the second layer. The FE model was validated by a calibration test of a full scale conductor, and by sensitivity studies varying the size and the number of elements of the model. Fatigue analysis of the conductor was carried out, based on the S–N curve for individual wires. Taking into account the effects of friction and local bending, agreement was obtained between predicted and experimental fatigue strength of the conductor, for the FE model as well as the analytical model.     

冲击碾压技术在高速公路施工中的应用

在公路工程施工中，冲击碾压技术不仅能够使路基的强度和密实度得到提升，而且还可以使成本降低、沉降减小、施工效率提高。就高速公路施工中冲击碾压技术的原理和应用实例进行探讨，具有一定的理论和实际意义。     

Behavior-consistent information-based network traffic control for evacuation operations

The evacuation operations problem aims to avoid or mitigate the potential loss of life in a region threatened or affected by a disaster. It is shaped to a large extent by the evolution of evacuation traffic resulting from the demand–supply interactions of the associated transportation network. Information-based control is a strategic tool for evacuation traffic operations as it can enable greater access to the affected population and more effective response. However, comparatively few studies have focused on the implementation of information-based control in evacuation operations. This study develops a control module for evacuation operations centered on addressing the demand–supply interactions by using behavior-consistent information strategies. These strategies incorporate the likely responses of evacuees to the information provided in the determination of route guidance information. The control module works as an iterative computational process involving an evacuee route choice model and a control model of information strategies to determine the route guidance information to direct evacuation traffic so as to approach a desired network traffic flow pattern. The problem is formulated as a fuzzy logic based optimization framework to explicitly incorporate practical concerns related to information dissemination characteristics and social equity in evacuation operations. Numerical experiments highlight the importance of accounting for the demand–supply interactions, as the use of behavior-consistent information strategies can lead evacuee route choices to approach the operator-desired proportions corresponding to the desired traffic pattern. The results also indicate that while a behavior-consistent information strategy can be effective, gaps with the desired route proportions can exist due to the discrete nature of the linguistic messages and the real-world difficulty in accurately modeling evacuees’ actual route choice behavior.     

瞬时转速在多缸柴油机断油故障诊断中的应用

通过测量WD615柴油机转速传感器接头电压的变化情况获得瞬时转速信号,采用滑动平均数字滤波方法对瞬时转速进行信号处理,进而实现汽车发动机不解体情况下的断油故障的诊断,并对发动机各缸的动力均衡性和总体动力均衡性做出评价。通过对WD615发动机的测试和分析证明,该方法可靠、快捷和实用。     

塘朗山隧道出口仰坡稳定性分析与加固

由于隧道受洞口立交及其上跨线的影响,使隧道洞口仰坡较高,因此,隧道仰坡的稳定,直接影响隧道进洞和隧道营运安全。介绍塘朗山隧道出口高仰坡在施工过程中变形的原因、仰坡的稳定性分析和采取的加固设计方案。     

环件轧制孔型共轭设计

本文分析了环件轧制的啮合运动，基于啮合理论提出了环件轧制孔型的共轭设计方法，应用方法，设计了典型环件的轧制孔型，因而从理论上解决了复杂环件轧制孔的设计难题。