Career development for women in maritime industry: organisation and socialisation perspectives

For centuries, the maritime industry has been a recognised place in society dominated solely by men, and even though there were women involved, they were mostly on the periphery. This research aims to fill the gap of women’s career development in this field, by investigating the relationships among the degree of organisational socialisation, women’s workplace culture, and the career development of women in the maritime workplace. The analyses are conducted with the structural equation model with 202 valid questionnaires. The results indicated that women’s workplace culture has a significantly negative relationship with the degree of organisational socialisation, and then in turn, it has a significantly positive relationship with women’s career development in the maritime industry. Finally, the results also indicate that the mediating effect of organisational socialisation existed between women’s workplace culture and women’s career development. According to the empirical analysis, this study makes conclusions as well as suggestions for the maritime enterprises as the reference for human resource management.     

Robust weekly aircraft maintenance routing problem and the extension to the tail assignment problem

In this paper, we study two closely related airline planning problems: the robust weekly aircraft maintenance routing problem (RWAMRP) and the tail assignment problem (TAP). In real life operations, the RWAMRP solution is used in tactical planning whereas the TAP solution is implemented in operational planning. The main objective of these two problems is to minimize the total expected propagated delay (EPD) of the aircraft routes. To formulate the RWAMRP, we propose a novel weekly line-of-flights (LOF) network model that can handle complex and nonlinear cost functions of EPD. Because the number of LOFs grows exponentially with the number of flights to be scheduled, we propose a two-stage column generation approach to efficiently solve large-scale real-life RWAMRPs. Because the EPD of an LOF is highly nonlinear and can be very time-consuming to accurately compute, we propose three lower bounds on the EPD to solve the pricing subproblem of the column generation. Our approach is tested on eight real-life test instances. The computational results show that the proposed approach provides very tight LP relaxation (within 0.6% of optimal solutions) and solves the test case with more than 6000 flights per week in less than three hours. We also investigate the solutions obtained by our approach over 500 simulated realizations. The simulation results demonstrate that, in all eight test instances, our solutions result in less EPDs than those obtained from traditional methods. We then extend our model and solution approach to solve realistically simulated TAP instances.     

城市地下道路分(合)流匝道通风阻力特性

为分析多点进出结构的城市地下道路空气流动特性,以长沙市营盘路湘江隧道为原型,通过现场实测、缩尺模型试验以及CFD软件数值模拟方法,对分(合)匝道通风阻力特性进行了研究,考察了雷诺数、风量比、分岔角度对分(合)流匝道阻力特性的影响规律。研究结果表明:1)主隧道与匝道风量比、主隧道与匝道夹角是影响分(合)流匝道局部阻力系数的关键因素;2)城市地下道路分(合)流匝道局部阻力变化特性,不宜简单套用通风管道的三通构件的参数;3)结合最小二乘法和Matlab软件对计算结果进行多因素回归分析,给出了基于长沙营盘路湘江隧道的分(合)流匝道主隧道和匝道的局部阻力系数关联式。研究结果可为复杂结构城市地下道路通风系统阻力特性分析及通风工程优化设计提供方法参考。     

掺混甲烷对乙烯层流预混火焰炭烟形貌的影响

针对掺混甲烷的乙烯层流火焰中的炭烟颗粒从形貌角度进行了研究,构建了具有相同当量比(2.07)、火焰温度、气体流速的层流预混乙烯火焰和掺混甲烷的乙烯火焰,并各自选取了3个高度进行热泳探针取样,采用TEM和AFM方法对各个工况的炭烟颗粒粒径分布、平均粒径、平均体积当量球径进行了对比。发现少量的甲烷掺混会令乙烯火焰中炭烟颗粒的尺寸变大,而当甲烷掺混量变多时该现象消失。而通过对颗粒的圆度、球度和分形维数计算和分析,发现即使是很小的颗粒也具有相似的不规则形状,这一现象广泛存在于各种火焰和各种大小的颗粒中,不受掺混比的影响,并且越大的颗粒结构越松散。     

Modeling research on manufacturing execution system based on large-scale system cybernetics

A cybernetics model of manufacturing execution system(MES CM) was proposed and studied from the viewpoint of cybernetics.Combining with the features of manufacturing system, the MES CM was modeled by"generalized modeling"method that is discussed in large-scale system theory.The mathematical model of MES CM was constructed by the generalized operator model, and the main characteristics of MES CM were analyzed.     

���˹���������������ɢ��������ʵ֤����

国家体育场作为北京奥运会的主会场成功地承担了开闭幕式和田径赛事任务。本文研究了其停车场车辆的交通疏散问题,制定了疏散方案。首先,分析了国家体育场停车场和泊位布局及车辆疏散的具体条件。其次,通过给定环境的场景和参数设定,对具体的奥运场馆停车场车辆的疏散方案进行了仿真和评价。最后,利用奥运会开幕式的车辆疏散实测数据进行了对比分析,在仿真中要员和贵宾车辆的总疏散时间为26min,而奥运会开幕式车辆疏散实测结果表明,全部要员、贵宾疏散完毕,共用时27min,从而验证了车辆疏散方案的准确性和实用性。     

采用变化基本体的授课方法以提高教学效果

在《机械（工程）制图》教学中,学生对基本体的变化及其在实际中的应用难以理解,文中介绍提高基本体教学效果的方法。     

基于系统动力学的大连市出租车保有量预测

采用系统动力学模型,找出影响出租车规模内外因素间的因果关系,包括经济、人口、机动车保有量、出行需求、政策等.在系统结构分析和因果反馈分析的基础上建立了出租车系统,以大连市出租车相关统计数据进行仿真计算,分析了不同的发展政策对出租车系统的影响,提出相应的建议和对策.     

船闸闸室明沟形式及消能效果分析

船闸侧墙廊道闸室明沟消能工布置及消能效果的优劣,直接影响闸室内船舶所受系缆力大小及停泊安全。利用局部模型,在恒定流情况下,对侧墙廊道闸室内布置单明沟机加槛、双明沟及三明沟消能工充水过程进行试验研究;分析和比较各明沟形式的剩余比能、动能及流场分布,综合评判各形式明沟消能工的消能特性,并在整体模型上进行了试验验证。研究结果表明:三种明沟形式比较,三明沟布置消能效果最优。双明沟消能形式较单明沟消能水体增大较多,消能工布置灵活,消能空间大,水流分布亦较单明沟更为均匀,在减小闸室内横向水流对船舶作用力方面较单明沟形式优越。因此,综合比较,双明沟消能效果较单明沟要好。     

船用桨后固定组合叶轮节能效果研究

船用桨后固定组合叶轮是一种新型螺旋桨节能装置。为了解其节能机理并验证节能效果,基于计算流体力学(CFD)方法对该问题进行研究。首先选用B4-65螺旋桨进行敞水数值模拟,验证计算模型和方法的正确性;然后重点对螺旋桨在加装桨后固定组合叶轮后的水动力性能进行模拟。结果表明:桨后固定组合叶轮能够较好地削弱螺旋桨后方的梢涡与毂涡,回收尾流能量。而且该节能装置能与螺旋桨产生有利干扰,增加桨叶上的推力。在低进速区(J0.4)时,该节能装置能达到2%以上的节能效果。