A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

重庆轨道交通环线电力监控与数据采集系统的建设与创新

基于电力监控与数据采集系统深度集成于综合监控系统的弊端分析,介绍了重庆环线电力监控与数据采集系统独立组网的自立分层分布式系统结构,及其在控制中心与综合监控系统的互联。介绍了基于电力系统CIM(公用信息模型)和CIS(组件接口规范)的电力监控与数据采集系统模型建立,详细阐述了重庆环线电力监控与数据采集系统的程序控制技术及远程图形服务技术,以及该系统在能源管理及其他高级应用方面取得的创新成果。     

散货船舱口盖剩余强度

通过对散货船舱口盖极限强度的理论分析，采用了正交各向异性板及刚塑性模型进行了理论上的推导，并对7万t散货船的1号舱的舱口盖(两块对称滚动式)，进行了ILL66及IACS URS21(1998年版与上述ILL66的88议定书中载荷的量级相当)的外载荷的比较及线性和非线性的有限元分析。本文所采用的有限元的线性及弹塑性计算对实际的舱口盖进行评估的结果证明，IACS URS21(ILL66的88议定书)的标准比ILL66的标准有所提高。采用非线性有限元法是在初始设计阶段使用的可行方法。这些结果可供规范研制工作参考。     

Time-series analysis of remote-sensed chlorophyll and environmental factors in the Santa Monica–San Pedro Basin off Southern California

The time-series of remote-sensed surface chlorophyll concentration measured by SeaWiFS radiometer from September 1997 to December 2001 and the relevant hydrological and meteorological factors (remote-sensed sea surface temperature, atmospheric precipitation, air temperature and wind stress) in Santa Monica Bay and adjacent waters off southern California were analyzed using wavelet and cross-correlation statistical methods. All parameters exhibited evident seasonal patterns of variation. Wavelet analysis revealed salient long-term variations most evident in air temperature during El Niño 1997–1998 and in wind stress during La Niña 1998–1999. Short-period (<100 days) variations of remote-sensed chlorophyll biomass were mostly typical to spring seasons. Chlorophyll biomass was significantly correlated with air temperature and wind stress: an increase of chlorophyll biomass followed with 5–6-day time lag an increase of wind stress accompanied by a simultaneous decrease of air temperature. The mechanism of these variations was an intensification of phytoplankton growth resulting from the mixing of water column by wind stress and entrainment of nutrients into the euphotic layer.     

一种多功能非线性控制器的电路设计

给出一种多功能曲线模拟电路,它可在不改变电路结构的情况下实现多种类型的非线性控制,克服了目前一些曲线模拟器应用上的单一性问题,为一些不使用微机技术完成非线性控制的场合提供了一种简单实用的方法。     

S^2 BHCA Multiple AUVs cooperation oriented control architecture

Oceanographic survey, or other similar applications should be the applications of multiple AUVs. In this paper, the skill ＆ simulation based hybrid control architecture （S^2BHCA） as the controller＇s design reference was proposed. It is a multi-robot cooperation oriented intelligent control architecture based on hybrid ideas. The S^2BHCA attempts to incorporate the virtues of the reactive controller and of the deliberative controller by introducing the concept of the ＂skill＂. The additional online task simulation ability for cooperation is supported, too. As an application, a multiple AUV control system was developed with three ＂skills＂ for the MCM mission including two different cooperative tasks. The simulation and the sea trials show that simple task expression, fast reaction and better cooperation support can be achieved by realizing the AUV controller based on the S^2BHCA.     

列车通信网络研究现状及展望

介绍了列车通信网络的主要任务和列车通信网络的拓扑结构,阐述了列车通信网络(TCN)的发展历程及目前国内外列车通信网络的发展现状,并展望了列车通信网络技术的发展趋势。     

船舶除锈机器人驱动系统设计

介绍了应用在船舶除锈的磁吸附爬壁机器人本体驱动系统的设计,着重阐述了系统的驱动原理和驱动电路。系统以89c51单片机为核心,通过键盘以及通信接口可以方便的控制步进电机带动机器人本体运动,充分发挥了单片机的优势。实验表明,系统电路设计合理,简单实用。     

水下航行器热动力推进系统的非线性变结构控制仿真研究

在对水下航行器热动力推进系统非线性模型进行合理简化的基础上，首次采用趋近律法设计了水下航行器变速变深运动的动力推进系统变结构控制器，并进行了数字仿真，仿真结果表明，所设计的控制器控制精度高，抑制抖振效果显著，且该方法物理概念清晰，算法简单，易于实现，对水下航行器热动力推进系统控制的工况应用有实用价值。