液压锤在盐田#3泊位桩基工程中的应用

介绍液压锤在盐田#3泊位码头桩基施工中的应用,并结合液压锤的性能与柴油锤进行了比较。     

岸桥钢丝绳张紧机构轮绳径比的优化选择

针对岸桥钢丝绳张紧机构的特点 ,结合钢丝绳的实际使用寿命和报废形式 ,剖析提高钢丝绳使用寿命的关键因素 ,优化轮绳径比。     

直驱式容积控制电液伺服系统及其在船舶舵机上的应用

介绍了直驱式容积控制电液伺服系统的组成、特点,并结合船舶舵机的应用背景,研制出了船舶舵机用的直驱式容积控制电液伺服系统试验样机,并对系统进行了相关理论分析和试验研究.研究结果表明,直驱式容积控制电液伺服系统作为船舶舵机的动力装置,其性能指标能够达到舵机的执行标准.与传统的液压舵机的动力装置相比,这种新型的船舶舵机动力装置具有节能高效、操作与控制简单、小型集成化、可靠性高等诸多优点,是一种有广泛应用前景的船舶舵机操舵装置.     

Trace metals in water, sediments and marine organisms from the northern part of the Gulf of Suez, Red Sea

Concentrations of Cd, Pb, Cu and Zn were determined in water, sediments, gastropod (Bulla umpulla) and green algae (Ulva lactuca) collected from five stations in the western side of the northern part of the Gulf of Suez during the period February 1993–January 1994. Sediments recorded the highest concentrations of Cd (2.26–4.40 μg/g) and Pb (13.90–28.34 μg/g), While the highest concentrations of the essential metals Cu and Zn were found in B. umpulla (28.19–72.04 and 60.24–108.74 μg/g, respectively). Water and sediments showed similar spatial distribution patterns for the highest mean values of the different metals. Highest values of the studied metals were found at stations influenced by various pollution sources such as harbours, and sewage and industrial drains. In contrast, the lowest concentrations were observed faraway from any pollution source. Calculations of concentration factors (C.F.) for gastropod and algae showed highest C.F. of Cd (4312.5–8705.9) and Pb (2103.3–8317.9) in algae, and highest C.F. of Cu (5288.9–42376.5) and Zn (3686.7–9631.5) in gastropod.     

Long-term changes of inorganic nutrients in the Lagoon of Venice (Italy)

The paper aims at investigating the trends of the concentrations of dissolved inorganic nitrogen (DIN) and phosphorous in the Lagoon of Venice, Italy, in the last 35 years. The trend analysis of ammonia nitrogen, nitrate nitrogen and reactive phosphorus (RP) yielded rather different results. The decrease in ammonia nitrogen concentration, in particular, in the basin influenced by severe industrial discharges, is accurately described by a negative exponential model. The nitrate concentration did not show significant interannual trends, while wide seasonal variations have been detected. Reactive phosphorus concentration increased until the end of the 1970s at the stations close to the industrial area as well as in those influenced by river discharges and by sewages of the city of Venice. The sudden decrease that followed was most likely related with environmental policies, namely the improvement of wastewater purification treatments and the regulation of phosphorus use in detergents.     

A pseudofield model approach to simulate compartment-fire phenomena for marine fire safety design

In order to prevent the spread of marine compartment fires, it is necessary to understand the governing factors or characteristics of fire-spread phenomena. We present a pseudofield model approach to this problem. We first described a field model of turbulent heat convection based on a standard k – turbulence model. Two-dimensional numerical simulations of a two-linked compartment fire were carried out in order to predict the turbulent convection flow induced by the heat released from the fire. Then a more complicated fire-spread problem of multilinked compartment fires was analyzed by means of a zone model, in which the amounts of oxygen consumption and gas generation were solved by a gas-balance equations system. The effect of threshold conditions on fire propagation and the effect of the thickness of the heat insulation were investigated with numerical simulations.     

钢结构景观人行桥梁高和铺装对人致振动和阻尼器设计的影响

以上海临港顶新科学家公园环形景观人行桥为例,详细分析了人行桥行人舒适度评估和质量调谐阻尼器（TMD）的设计过程。在跨径、梁高、桥面附属等外部景观条件的约束下,针对人行桥主梁梁高和桥面铺装厚度两方面的业主要求,对TMD的合理布置、数量的优化做了研究。总结归纳了人行振动计算和TMD的设计经验。     

基坑工程监测项目初始值采集时间研究

基于多个基坑工程监测实例,通过对不同的施工阶段监测数据变化量与现行规范规定的控制值进行对比,分析不同的监测项目初始值采集时间对监测结果的影响程度。总结出围护墙顶部水平位移、深层水平位移、钢筋混凝土支撑内力、周边建筑竖向位移等监测项目合理的初始值采集时间,为基坑工程监测结果的科学性、监测评价的准确性奠定基础。     

高速铁路进站节能坡设计方法研究

在线路纵断面的设计中引入节能坡设计理念,对优化线路纵断面设计、降低牵引能耗值和节省运营支出具有重要意义。根据高速铁路的特点,提出高速铁路进站节能坡的设计方法和计算算法,给出计算流程,确定各影响参数的约束条件。开发进站节能坡设计程序模块,实现多参数化的进站节能坡设计。在此基础上,采用计算机仿真分析方法,对车站坡段坡度、车站中心至节能坡变坡点距离、动车组编组质量、进站制动力使用系数、节能坡进入初始速度5个主要影响因素进行计算和仿真分析,确定各因素对进站节能坡的影响程度,为进站节能坡的设计提供参考和依据。     

有砟轨道动刚度特性研究

为充分了解轨道动力特性,对有砟轨道动刚度展开研究。通过建立有砟轨道力学模型,分析0~2 000 Hz范围内轨道动刚度的振动特性,得出:轨道动刚度相对于轨道静刚度是随激振频率变化的,轨道动刚度在低频段受激振频率变化影响较小,在中、高频段内轨道动刚度振动幅值随激振频率变化而变化,是系统的固有特性,需通过对构件刚度、阻尼等参数调节。阻尼系数对轨道动刚度的幅值有影响,但不改变轨道的共振频率。质量阻尼系数对轨道动刚度波动范围及幅值的影响小于刚度阻尼系数的影响。阻尼系数增大,轨道动刚度波动幅值增大。