气压ABS系统流量特性的实验研究

开发了气压ABS电磁阀测试系统，建立了气室充、放气过程压力变化的微分方程，结合两者研究了气压ABS系统的流量特性，获得了某中型客车ABS系统在不同情况下的流量系数。讨论了ABS电磁阀的结构参数和动作频率对整个系统流量特性的影响，并得到了几种典型动作频率下的流量系数。建立的气室压力模型和所求得的流量系数为气压ABS控制逻辑的设计提供了依据。     

汽车电动助力转向盘力特性的初步研究

从转向轴助力式电动转向系动力学模型出发,推导出转向盘力的仿真计算公式,并简要分析了比例控制式EPS系统的控制系数对其转向盘力特性的影响。得出通过采用可变比例控制的方式可以改善汽车的转向盘力特性的结论。     

车辆动力传动系固有特性灵敏度分析及动力学修改

分析了车辆动力传动系无阻尼自由振动固有特性的灵敏度，特别给出了固有频率和振型对轴系刚度及惯量等物理参数的灵敏度。基于固有特性灵敏度分析，给出了动力学修改的计算方法。并以某重型车辆动力传动系为实例计算并分析了其固有频率和振型的灵敏度问题，在此基础上进行了动力学修改。     

小型铣刨机车体升降油缸动态过程的分析

通过对小型铣刨机车体升降系统的简化,建立了液压缸运动速度与流量的传递函数,并且在系统参数静态设计方法的基础上,考虑了系统参数对其动态特性的影响.     

公路桥梁高承台桩基沉降分析研究

桩基的沉降计算是桩基工程设计不可忽视的关键问题之一。为探讨高承台桩基沉降特性，基于荷载传递法提出一种高承台桩基沉降计算方法，并采用多组不同参数对某高承台群桩的沉降特性进行了比较计算和深入分析，得到了多个影响因素下群桩沉降的变化规律。     

MGM（1,n）模型在软土路基沉降预测中的应用

为提高高等级公路路基沉降预测的准确性,提出了一种由灰色相似关联度分析优选各个相关预测变量,构建灰色MGM（1,n）模型进行沉降预测的方法,可以更全面有效地利用工程监测数据.实例分析对比表明,这种方法比其他常用沉降预测法具有更高的准确性和可靠性.     

Dynamic stride length adaptation according to utility and personal space

Pedestrians adjust both speed and stride length when they navigate difficult situations such as tight corners or dense crowds. They try to avoid collisions and to preserve their personal space. State-of-the-art pedestrian motion models automatically reduce speed in dense crowds simply because there is no space where the pedestrians could go. The stride length and its correct adaptation, however, are rarely considered. This leads to artefacts that impact macroscopic observation parameters such as densities in front of bottlenecks and, through this, flow. Hence modelling stride adaptation is important to increase the predictive power of pedestrian models. To achieve this we reformulate the problem as an optimisation problem on a disk around the pedestrian. Each pedestrian seeks the position that is most attractive in a sense of balanced goals between the search for targets, the need for individual space and the need to keep a distance from obstacles. The need for space is modelled according to findings from psychology defining zones around a person that, when invaded, cause unease. The result is a fully automatic adjustment that allows calibration through meaningful social parameters and that gives visually natural results with an excellent fit to measured experimental data.     

基于BP网络的球鼻首参数化优化

本文以某集装箱船为研究对象,对降速航行后的球鼻首进行优化。采用Catia建立船体三维模型,为了产生不同形状的球鼻首,选取球鼻特征参数来描述其基本结构;采用拉丁超立方试验抽样方法得到12组不同形状的球鼻首,提出运用非线性拟合能力较强的BP网络构建球鼻首参数和阻力系数之间的关系模型;采用遗传算法对训练后的网络进行极值寻优。结果显示,优化船型的阻力系数显著降低,说明该方法对球鼻首的优化有一定的借鉴意义。     

The symmetric intersection design and traffic control optimization

It is well recognized that the left-turning movement reduces the intersection capacity significantly, because exclusive left turn phases are needed to discharge left turn vehicles only. This paper proposes the concept of Left-Hand Traffic (LHT) arterial, on where vehicles follow left-hand traffic rules as in England and India. The unconventional intersection where a LHT arterial intersects with a Right-Hand Traffic (RHT) arterial is named as symmetric intersection. It is only need three basic signal phases to separate all conflicts at symmetric intersection, while it at least need four signal phases at a conventional intersection. So, compared with the conventional intersection, the symmetric intersection can provide longer green time for the left-turning and the through movement, which can increase the capacity significantly. Through-movement waiting areas (TWAs) can be set at the symmetric intersection effectively, which can increase the capacity and short the cycle length furthermore. And the symmetric intersection is Channelized to improve the safety of TWAs. The Binary-Mixed-Integer-Linear-Programming (BMILP) model is employed to formulate the capacity maximization problem and signal cycle length minimization problem of the symmetric intersection. The BMILP model can be solved by standard branch-and-bound algorithms efficiently and outputs the lane allocation, signal timing decisions, and other decisions. Experiments analysis shows that the symmetric intersection with TWAs can increase the capacity and short the signal cycle length.     

成昆铁路矮塔斜拉桥索梁锚固区模型试验研究北大核心

为研究铁路矮塔斜拉桥索梁锚固区的受力形式,以成昆铁路金沙江大桥为工程背景,针对该桥采用的新型梁顶混凝土锚固构造,通过缩尺模型试验研究其在不同荷载下的应力分布和开裂特征。结果表明:在斜拉桥成桥恒载索力作用以及最不利荷载组合索力作用下,C7锚固块更容易发生破坏,将其作为试验构件开展缩尺模型试验,发现锚固块在不同张拉荷载作用下张拉至设计索力的过程中,应变增幅基本上线性增加,卸载后同样呈线性减小,说明混凝土受力处在线弹性阶段,且应力在规范要求范围内。在试验荷载加载至140%设计索力时,锚固块前端倒角位置开始出现细小裂纹且随荷载的增加不断开展。当荷载卸载至0时,之前出现的裂缝随荷载的减小逐渐闭合,宽度肉眼不可见,表明该构造能够满足正常使用要求且具备足够的安全储备。