某钢管混凝土拱桥加固与分析

结合工程实例,分析了某钢管混凝土拱桥加固改造后的受力状态。分析表明,该桥经加固后,受力状态虽满足规范要求,但是安全储备富余不足,应引起重视。同时,在静力分析的基础上,还分析了该桥梁的稳定性和动力特性。分析结果表明,桥梁的整体稳定性较好。     

岩溶区盾构带压开仓掌子面加固关键技术研究

针对盾构过岩溶区带压开仓常规加固所存在的弊端,以深圳地铁16号线龙龙区间为背景,研究注浆加固关键技术。通过试验配制具有一定胶凝性能的快凝低强度浆液,并利用研制的可伸缩液压注浆装置,将浆液直接快速输送至地层薄弱点,使其渗入掌子面岩土裂隙,实现掌子面整体加固、阻断外部来水和密封土仓高压气,快速稳固刀盘、土仓土体,同时做好盾尾止水,保证换刀安全。该方法与常规衡盾泥加固相比,经济效益显著,对复合地层、富水砂层、软塑或流塑性地层等不良地质中盾构带压开仓具有重要指导意义。     

具有无序排列管片环结构的地铁盾构隧道数字模型智能重建北大核心CSCD

运营地铁隧道的管理、健康监测及维护正逐渐趋向于数字化、智能化;但常因地铁盾构隧道管理和检测单位缺少隧道数字模型,限制了地铁隧道智能维护和管理系统的应用和发展。文章针对地铁盾构隧道中无序排列的管片环结构,提出了一种基于深度学习和机器视觉的地铁盾构隧道数字模型智能重建方法,利用检测车获取的隧道衬砌内表面高清图片,对管片特征物(螺栓孔)进行智能识别与自动分类,再根据螺栓孔群的分布特点自动推断隧道管片环的排版规律,从而结合隧道实际线路实现隧道数字模型快速重建。某地铁隧道的实例应用结果表明,该方法适用于管片无规律性错缝拼装的情况,能以100%的准确率实现地铁盾构隧道数字模型的智能重建。     

China’s electric car frustrations

By 2020, the vehicle population in China will likely exceed 280 million—exacerbating national energy security, urban air pollution, and traffic congestion. In response, many local and regional governments in China are pursuing an expanding array of measures to restrain growth in personal vehicle ownership and, along with the central government, reducing emissions and energy use of vehicles. One prominent strategy is the promotion of new energy vehicles, especially plug-in electric vehicles (PEVs). Large subsidies were offered—up to $27,600 (171,000 RMB) per vehicle in some regions, including almost $9200 (57,000 RMB) from the central government—which suggests that China is making a major commitment to PEVs. But sales have been meager. In 2013, only 17,600 PEVs, mostly buses and utility trucks, were sold, less than 0.1% of total civilian vehicle sales. Several factors explain the failure of PEV sales to take off: (1) protectionism by local governments; (2) uncertainty over which electric-drive vehicle technologies to promote and what consumers are willing to pay, (3) lagging investments in charging infrastructure, and (4) conservative investment behavior by automakers and battery manufacturers. The central government issued directives to local governments in late 2013 to reduce barriers to out-of-town companies, resulting in modest sales increases in early 2014, but a more coherent, broader, and effective set of policies, incentives, and strategies are needed to overcome consumer and industry resistance and the lack of charging infrastructure.     

地铁联络通道受损管片修复方法的适应性研究

为减少对开挖周边环境的影响,基于非开挖修复理念提出了焊接钢板加固的联络通道受损管片修复加固方法。建立计算模型,对加固后的混凝土强度和钢板强度进行分析,并通过监测仪器对加固后的效果进行监测。依据数值模拟和实测数值结果得出加固后钢板的最大拉应力、最大压应力分布规律,以及受损管片在加固后的应力峰值分布情况。研究表明,该修复加固方法可行,并具有良好的应用性。     

Modeling the impacts of alternative emission trading schemes on international shipping

Various market-based measures have been proposed to reduce CO₂ emissions from international shipping. One promising mechanism under consideration is the Emission Trading Scheme (ETS). This study analyzes and benchmarks the economic implications of two alternative ETS mechanisms, namely, an open ETS compared to a Maritime only ETS (METS). The analytical solutions and model calibration results allow us to quantify the impacts of alternative ETS schemes on the container shipping sector and the dry bulk shipping sector. It is found that an ETS, whether open or maritime only, will decrease shipping speed, carrier outputs and fuel consumption for both the container and dry bulk sectors, even in the presence of a “wind-fall” profit to shipping companies. Under an open ETS, the dry bulk sector will suffer from a higher proportional reduction in output than the container sector, and will thus sell more emission permits or purchase fewer permits. Under an METS, container carriers will buy emission permits from the dry bulk side. In addition, under an METS the degree of competition within one sector will have spill-over effects on the other sector. Specifically, when the sector that sells (buys) permits is more collusive (competitive), the equilibrium permit price will rise. This study provides a framework for identifying the moderating effects of market structure and competition between firms on emission reduction schemes, and emphasizes the importance of understanding the differential impacts of ETS schemes on individual sectors within an industry when considering alternative policies.     

杯型冻结壁不同杯身长度的数值分析

以某过江隧道东端头盾构始发工程为依托,在封门拆除这个最不利工况下对冻土帷幕及端头地层进行数值分析,对不同杯身长度冻土帷幕的位移场和应力场分布情况进行研究。主要得出:杯身基本不发生位移;地表离掌子面越近沉降量越大;纵向位移最大值均发生在暴露掌子面中心处;应力值均在设计强度范围之内,且有较多富余;杯身和杯底厚度均为2 m时,该工程杯身长度取3 m就可在强度和变形上满足要求,但为了止水,杯身长度宜为18 m。     

盾构进出洞处地基水平杯型冻结加固的温度场研究

上海城市轨道交通某线在冻结法加固盾构进出洞工程在穿越一中间风井时采用水平杯型冻结技术。通过冻结温度场分析,验证了该风井处进出洞冻结工程设计中杯身冻结器比杯底冻结器长1.1 m的合理性,同时验证了水平杯型冻结壁设计在盾构机进出洞冻结工程设计中的科学性,为同类工程设计和施工提供借鉴。     

环境约束下中国交通运输业产能利用测算

测度交通运输业产能利用可帮助交通行业应对产能优化和节能减排的双重挑战，实现高质量发展。研究旨在环境约束视角下，构建一个普适性的产能利用（CU）评价框架，并用于交通运输业产能利用测度研究。将交通运输业能源消耗量和CO₂排放量纳入产能利用评价框架，采用改进的基于数据包络分析的差分法，测度2011~2017年中国交通运输业产能利用。研究结果表明：①2011~2017年间中国交通运输业平均CU值为0.026 0，并以2014年为临界点，呈现先降后增的趋势，这表明中国交通运输业确实存在产能利用不足的问题，且2015~2017年非常严重；②交通运输业产能利用水平区域差异化显著，研究期内与中国其他地区的CU水平相比，西南地区产能利用不足问题最严重；③与原始差分法的测度结果进行对比，所提出的改进方法更具合理性和先进性；④推动交通技术创新发展和合理规划交通资源是产能利用水平提升的关键途径。该研究为制定交通运输业产能利用提升的政策提供科学依据，对建立完善的交通运输业产能利用监测体系具有实际指导意义，有利于实现中国交通运输业产能利用水平整体的提升。