冲击压实技术在郑州西南绕城高速公路上的应用

主要阐述了冲击压实机在高速公路路基补强冲击碾压中的应用情况,对高速公路挖方路基和高填方路基进行冲击压实处理,并进行了大量的试验研究,通过冲击碾压补强处理,显著提高了路基的压实度、整体强度和承载力,加速了路基的下沉降,减少了路基的工后沉降,达到了预期的目的.     

工程车辆FOPS冲击试验中落锤塑性变形研究

为了对工程车辆的落物保护装置(FOPS)进行可靠性试验提供理论依据,采用冲击动力学的塑性波两侧的动量平衡理论对工程车辆FOPS受冲击时落锤的动态响应进行了研究,建立了锤头变形的基本方程,绘制了方程相应曲线;建立了锤头在冲击过程中任一瞬时变形长度和非变形长度的数学模型,找到了工程应变和冲击速度之间的曲线对于塑性大变形的突变点及影响落锤变形的各个因素和控制变形的依据。为减小落锤的蘑菇形尺寸,降低锤头的材料成本,多次重复使用落锤,进行合理的落锤结构设计指明了方向。     

昆明东风路立交桥动载试验分析

桥梁结构的动力特性(振型、频率和阻尼)是桥梁承载力评定的重要参数,同时也是识别桥梁结构工作性能和桥梁抗震分析的重要参数,本文通过昆明东风路立交桥的动载试验,分析桥梁在不同工况下动应变、动挠度、频率和阻尼以及影响实测冲击系数的原因。对全面地评价桥梁结构有重要意义。     

重型汽车荷载作用下简支梁桥的动力反应分析

基于结构动力学理论，视桥梁与车辆为一个相互作用的整体系统，建立了桥梁在移动车辆荷载作用下振动的计算模式。在分析中，汽车采用2轴模型，桥梁结构模拟为梁单元，统一列出车桥系统的动力方程，编制了计算程序。对实际预应力混凝土简支箱梁桥在重型汽车作用下的动力冲击效应进行了计算，并与轻型汽车荷载作用下产生的动力冲击系数进行了比较。     

基于ANN的船舶撞击高桩码头群桩损伤位置预测

本文采用有限元软件ABAQUS建立了船舶撞击高桩码头群桩的空间有限元模型。通过计算评估了撞击力、桩体刚度、撞击位置和撞击角度下对群桩结构损伤位置的影响。基于人工神经网络(ANN)方法,对不同参数组合下的群桩结构损伤位置进行了预测,并对ANN方法的可行性进行了评估。     

港珠澳大桥建设对珠三角地区物流业的影响

港珠澳大桥将改变珠江口东西两岸之间的空间运输联系方式,从而改变整个珠三角地区的物流格局.从珠三角地区城市空间布局结构、产业特点出发,总结珠三角地区物流业特点,对港珠澳大桥影响珠三角物流格局的途径进行介绍；并逐一分析港珠澳大桥建成后对香港、深圳、珠海等珠三角主要城市物流业的不同影响.     

冲压机械振动对高铁桥梁及行车动力影响分析

高速铁路桥梁的平顺性和稳定性对运营列车的平稳性和安全性有很大影响。为研究冲压机械产生的外部振动激励对高铁桥梁的影响,首先通过对此机械引起的地面振动进行实测,并结合有限元分析软件,确定最大冲击荷载作用下产生的地面振动及传播至桥墩处的振动;然后通过建立列车-轨道-桥梁耦合动力学模型,将桥墩处的地面振动作为激励输入,分析列车以不同速度通过时车辆、桥梁动力学响应。结果表明:地面冲击振动有限元模型计算结果与实测结果基本相符,验证了模型的可靠性;地面振动对桥梁响应会产生一定的影响,距振源50 m处地面振动对桥梁所产生的影响较距振源80 m处(桥墩处)的大,但对运行车辆的影响很小;随着车速由250 km/h至350 km/h,车辆及桥梁各结构的动态响应均有所增大,但都未超出安全限值。因此,冲压机械冲击作用导致的地面振动对列车-轨道-桥梁系统动态服役性能影响非常有限。     

Can we reliably assess climate mitigation options for air traffic scenarios despite large uncertainties in atmospheric processes?

Air traffic has an increasing influence on climate; therefore identifying mitigation options to reduce the climate impact of aviation becomes more and more important. Aviation influences climate through several climate agents, which show different dependencies on the magnitude and location of emission and the spatial and temporal impacts. Even counteracting effects can occur. Therefore, it is important to analyse all effects with high accuracy to identify mitigation potentials. However, the uncertainties in calculating the climate impact of aviation are partly large (up to a factor of about 2). In this study, we present a methodology, based on a Monte Carlo simulation of an updated non-linear climate-chemistry response model AirClim, to integrate above mentioned uncertainties in the climate assessment of mitigation options. Since mitigation options often represent small changes in emissions, we concentrate on a more generalised approach and use exemplarily different normalised global air traffic inventories to test the methodology. These inventories are identical in total emissions but differ in the spatial emission distribution. We show that using the Monte Carlo simulation and analysing relative differences between scenarios lead to a reliable assessment of mitigation potentials. In a use case we show that the presented methodology can be used to analyse even small differences between scenarios with mean flight altitude variations.     

Traffic and emissions impact of congestion charging in the central Beijing urban area: A simulation analysis

Congestion charging is being considered as a potential measure to address the issue of substantially increased traffic congestion and vehicle emissions in Beijing. This study assessed the impact of congestion charging on traffic and emissions in Beijing using macroscopic traffic simulation and vehicle emissions calculation. Multiple testing scenarios were developed with assumptions in different charging zone sizes, public transit service levels and charging methods. Our analysis results showed that congestion charging in Beijing may increase public transit use by approximately 13%, potentially reduce CO and HC emissions by 60–70%, and reduce NOx emissions by 35–45% within the charging zone. However, congestion charging may also result in increased travel activities and emissions outside of the charging zone and a slight increase in emissions for the entire urban area. The size of charging zone, charging method, and charging rate are key factors that directly influence the impact of congestion charging; improved public transit service needs to be considered as a complementary approach with congestion charging. This study is used by Beijing Transportation Environment and Energy Center (BTEC) as reference to support the development of Beijing’s congestion charging policy and regulation.     

船用电器柜抗冲击设计研究

为增强船内部电器柜的抗冲击性能,采用有限元法对船内不同安装型式的电器柜结构进行了模态和抗冲击性能仿真分析,通过对比分析得出了使用撑杆加固型式安装的电器柜能显著提高船内电器柜的抗冲击性能的结论,并确定了电器柜抗冲击优化设计方案。