应用固有应变法计算焊接变形时材料模型的选择研究

分别采用理想弹塑性模型和双线性强化模型,推导出各自的固有应变计算公式,研究不同材料模型对于焊接结构变形的影响。研究结果表明,两种固有应变计算公式所预测的变形结果之间相对误差较小,即不同材料模型的选择对预测结构焊接变形的影响可以忽略。     

大深度浮力驱动式水下运载器的浮潜运动研究

基于模型试验,对大深度浮力驱动式水下运载器的上浮运动进行研究与分析,基于数值仿真,提出大深度浮力驱动式水下运载器浮潜运动的快速预报方法,并将预报结果与模型试验结果进行对比,证明快速预报方法的准确性。使用快速预报方法,针对水下运载器比重变化、流体密度变化、水下运载器初速度以及水流扰动4种因素对浮潜运动的影响进行研究.此外,对水下运载器作六自由度运动时所受的水动力进行计算,为后续的六自由度运动预报和研究提供基础。     

整体温差作用下高桩码头基桩内力计算方法

为研究高桩码头完建后整体温差对基桩内力的影响,结合工程实例,建立三维有限元模型,对上部平台温变规律进行分析,认为斜桩、直桩对上部平台温变约束作用均可忽略不计,平台处于自由温变状态,存在水平位移为零的温变发散中心。基于刚性平台自由温变规律,提出了考虑斜桩码头平动扭转的三维算法,三维算法的桩顶位移、内力与有限元结果接近。对于全直桩或近似对称的斜桩码头,还可简化为平动的二维算法。并给出了直桩、斜桩内力的估算简式,由估算式可知,位于发散同心圆上的直桩内力大于斜桩内力,桩顶轴力、弯矩与桩径2次、4次方成正比,桩径对温差内力的影响显著。     

玻璃钢防腐蚀材料检测方法

针对海洋环境下混凝土结构易遭受海水侵蚀导致结构破坏、而高性能混凝土等技术措施不能满足高耐久技术要求的现状,采用玻璃钢包覆防腐蚀技术以提高海工混凝土结构耐久性。对玻璃钢包覆防腐蚀材料的原材料和耐久性检测方法进行分析,提出原材料和耐久性检测方法,以利于玻璃钢防腐材料施工质量的控制。     

超临界雷诺数下桥墩紊流宽度的计算方法

桥墩紊流宽度的计算与水流雷诺数的范围关系较大,将影响到计算成果的合理性。结合山区河流超临界雷诺数条件,采用格子Boltzmann方法模拟桥墩三维紊流流场,并结合大涡模拟和运动边界处理方法,分析不同来流、河形等条件下的桥墩三维紊流宽度,由此建立了顺直河道和弯曲河道中圆型桥墩相对紊流宽度与弗劳德数之间的耦合关系。该研究成果通过四川邓家坝大桥航宽验算,与经验法及祖小勇算法比较,发现该方法得出的桥墩紊流宽度略小、其数值趋于合理。     

Model Test on Grouting Law in Dynamic Water-Rich Sand Layers by the Electric Resistance Method北大核心CSCD

In order to study the diffusion law of grouting slurry in the water-rich sand layer under flowing water conditions, a grouting test model consisting of a main test system, a grouting system, and a measurement system was developed. And for detecting the diffusion scope of the grouts, a new resistivity method was proposed. It is found that the relationship between grouting pressure and grouting rate during the test is strong. Under hydrodynamic conditions, the grouting slurry diffuses elliptically. Due to gravity and the effect of the upper water flow, the center of gravity of the ellipsoid is below the grouting outlet, and the grouting effectively improves the physical and mechanical properties of water-rich sand bodies. At the same time, the resistivity method has a good application effect on the detection of grouting diffusion range. The range of slurry diffusion obtained by the resistivity method is basically consistent with the boundary of the stone body after excavation, indicating that the resistivity method is reliable for detection of grouting range in dynamic water-rich sand layer. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Back-Calculation of Ground Stress Field and Rockburst Analysis for Wunvfeng Tunnel北大核心CSCD

Studying the in-situ stress distribution at a tunnel site is very important to determine surrounding rock characteristics, the engineering design and the construction scheme. By using the multiple linear regression method based on the least square algorithm, the initial geostress field is analyzed and the corresponding regression coefficients are obtained. The ground stress obtained from the proposed back analysis is reasonable and can meet the demands of the engineering applications. From the rockburst risk level distribution diagram, it is speculated that the Wunvfeng tunnel is in the high filed stress area. Field monitoring should be strengthened and emergency plans should be made to cope with the rockburst risks during the construction process. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis of Ground Response and Structure Stress Induced by PBA Method北大核心CSCD

The application of prefabricated tunnel technology has been become a new research field both in China and abroad. Based on the running tunnel between Yufuhe station and Wangfuzhuang station of Jinan rail transit line R1, a new prefabricated tunnel construction technology, the PBA method is presented. This paper makes a detailed discussion on section form, supporting scheme and construction process of the PBA method. In this study, 3D a new 3D numerical model for PBA method is presented by finite difference numerical simulation software Flac and the construction processes are modeled. The rule of ground surface settlement, ground deformation and structural stress caused by PBA method is studied in detail. Results show that the structure of PBA method can effectively control the deformation magnitude and scope. Stress concentration appears at the prefabricated connection parts and the reinforcement needs to check. The total assembled structure forms the load-bearing system after the completion of the lateral wall. The built-in depth of the precast pile and pile bottom grouting quality should to be ensured to control the displacement of the precast piles. The results of this study will be a useful reference for similar projects in the future. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis of the Circulation System of a Slurry Shield and the Muck Carrying Ability of a Dredging Pipe北大核心CSCD

The circulation system of a slurry shield is composed of a transportation system and a processing system.For shield construction, correct selection of the circulation system for the slurry shield is directly related to construc-tion speed. Using the Nanjing Yangtze tunnel as an example, the material balance calculation of the circulation sys-tem, sieving effect analysis, and analysis of the muck carrying ability of the dredging pipe are conducted for various strata. The practical results show that above mentioned calculations and analysis method provide a good reference for the proper selection of a slurry separation system and dredge pipe. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

逆向支撑底模反吊在水中防撞墩台施工中的应用

在航道整治工程中设置的桥梁防撞墩,由于墩台的底部经常设置在常年平均水位之下,无法按常规方法采用底部模板正向支撑系统施工。通过采用逆向支撑底模反吊方案,将钢木组合整体模板吊装入水,墩台分层浇筑的方式进行施工。该方案无需设置围堰,形成干地施工条件,成功解决水下混凝土浇筑和模板拆除难的问题,也解决通航水域狭小、操作空间有限、保证正常通航的问题,具有施工方便、安全性高、墩台施工精度易于控制的优点。