船舶开孔梁局部屈曲的无网格MLPG分析方法

[目的]针对船舶开孔梁板易产生局部屈曲效应、受到较高的集中载荷作用会产生明显的结构响应和屈曲破坏力的问题,提出采用无网格数值方法对该类问题进行数值分析。[方法]首先,以问题域离散节点为基础建立其紧支函数,运用加权余量法建立系统位移场离散方程,并由移动最小二乘法构造离散节点的形函数,以获得位移函数的逼近函数;然后,结合经简化的屈曲评估法,将屈曲方程特征值求解进行降阶处理,得到更为精确的屈曲载荷因子;最后,进行算例演示,比较所提方法和传统计算方法并进行验证。[结果]结果显示,所提方法有效,其结果与原结构有着更高的契合度。[结论]针对开孔板梁的无网格法数值分析特性可为分析各种形状的蜂窝状板梁结构提供一种新的思路。     

重力式方块卸荷板大型构件出运码头升级改造

以工程实例介绍了重力式方块卸荷板码头的改造设计方案。由于原有码头卸荷板悬臂较大,在码头前沿均布荷载增大的情况下,使得基床顶面产生较大的后倾应力,基床承载力不满足规范要求。改造方案通过在后方设灌注桩及现浇钢筋混凝土板,减少码头卸荷板悬臂部分上部荷载,防止基床顶面产生较大的后倾应力,为类似的码头改造设计提供了借鉴。     

无人帆船循迹航行的控制研究

提出一种适用于无人帆船循迹航行的控制器,并应用于一条1.5m长风帆艇的湖上航行测试。该控制器包含三个独立模块,局部路径策略模块决定帆艇的转向过程;帆自动控制模块根据帆位角和相对风向角的对应关系获取最佳推进力;舵自动控制模块基于从航海经验中提炼的245条模糊控制规则实现航迹调整。1.5m帆艇的湖上测试结果表明,该控制器在多种风场条件下都可有效完成帆艇的循迹航行,具有在无人帆船上实现长程航行的应用前景。     

A proposal for cost-related and market-oriented train running charges

This paper examines some key aspects of a charging system for promoting railway transport, including charges reflecting a clear relationship with costs (transparency) and charges reflecting the quality of the infrastructure manager's service. Train running charges recover track-related costs and can help to develop a charging system that meets these requirements. To orient train running charges to the market, a method for processing track maintenance and renewal costs is proposed whereby the quality of the service provided by an infrastructure is measured according to its utility to the railway undertaking. To achieve transparency, a single indicator is used for cost planning and the subsequent levying of costs on railway undertakings. The paper includes an example of how proposed train running charges would be calculated according to data from 14 European countries. The example shows that short-distance trains generate the lowest maintenance and renewal costs, followed by long-distance trains and freight trains.     

A practical capacity model of a single track line

The paper presents a model for determining the practical capacity of a single track line, i.e. the maximum number of trains which can be run along it in a time unit under the condition that each train enters its bottleneck segment with a definite delay.

The input data used in the model are: geometrical characteristics of the bottleneck segment of the line under study, the intensity and structure of demand expressed by a number of trains which are run over the line in a given time unit, the scenario of traffic running over the line under study and the operational tactics of individual train categories processing on the bottleneck segment.

(Two tactics can be applied in the train processing on the line under study; first, the trains of individual categories are given different priorities in the processing, and second, all the trains have the same priority).

The output results of the model are average delays of trains of each category occurring within the train processing performed on the bottleneck segment of the line under study in a given time unit.     

运用操纵模拟器试验进行超大型船舶航道宽度计算研究

运用船舶操纵模拟器模拟试验的方法,通过试验分析风、流压偏角等因素与超大型船舶在航行时航迹带宽度之间的关系,提出了超大型船舶在风、流以及波浪作用下,进出港航行所需航道宽度的计算方法。     

土工布作水泥混凝土路面隔离层应用研究

主要结合广东、湖南等省高速公路中采用土工布作水泥混凝土路面隔离层进行的路面层间力学性能试验与工程应用研究,探讨了贫混凝土基层上铺筑水泥混凝土面层时采用土工布隔离层与无隔离层时的层间力学性能差别。通过现场试验路施工,总结了土工布用于路面隔离层的施工控制技术。获得的土工布隔离层层间力学性能参数与施工应用技术,为实体工程路面设计、施工控制提供了科学依据。     

正交异性钢桥面板的计算分析

正交异性钢桥面板在钢桥尤其是大跨度钢桥设计中广泛使用。该文通过分析总结正交异性钢桥面板的计算方法,为设计人员在设计工作中提供参考。对比整体计算法和叠加计算法的优缺点,并通过工程实例,采用格子梁法详细分析了正交异性钢桥面板的计算过程,同时阐述了计算过程中的注意事项,指出整体计算法、P-E法和格子梁法三种计算方法中格子梁法更加高效,整体计算法最为准确。     

板式无砟轨道交通引起的环境振动数值分析

利用已研究出的高速铁路动荷载,采用粘弹性边界,运用有限元法建立轨道-路基-大地二维动力分析模型,分析板式无砟轨道交通引起的振动在大地中的传播特性。计算分析表明:地表的振动强度随着离轨道中心线的距离增加而逐渐衰减。离轨道中心线近处,地表振动较强,而且加速度主要频段在20 Hz以上;离轨道中心线较远处,振动较小,加速度主要频段在10 Hz以下。随着离轨道中心距离的增加,加速度幅值随之减小,而且地表20 Hz以上的振动衰减得较快,10 Hz以下的振动衰减得较慢。     

Dynamic Train-Track Interaction: Variability Attributable to Scatter in the Track Properties

A numerical method to simulate vertical dynamic interaction between a rolling train and a railway track has been used to investigate the influence of stochastic properties of the track structure. A perturbation technique has been used to investigate the influence of the scatter in selected track properties. The train-track interaction problem has been numerically solved by use of an extended state-space vector approach in conjunction with a complex modal superposition for the whole track structure. All numerical simulations have been carried out in the time-domain with a moving mass model. Properties such as rail pad stiffness, ballast stiffness, dynamic ballast-subgrade mass and sleeper spacing have been studied. To obtain sufficient statistical information from track structures, full-scale measurements in the field and laboratory measurements have been carried out. The influence of scatter in the track properties on the maximum contact force between the rail and the wheel, the maximum magnitude of the vertical wheelset acceleration, and the maximum sleeper displacement have been studied. Mean values and standard deviations of these quantities have been calculated. The effects of the variation of the investigated track properties are discussed.