低交通量下“与车随行”隧道照明节能控制技术应用研究

针对公路隧道照明安全与节能之间的矛盾，特别是低交通量下“无车照明”的能耗浪费现象，采用微波车检实时探测交通流技术，提出一种在低交通量下实施“车来灯亮、车走灯暗”的“与车随行”智能控制技术。根据安全视距和人眼视觉反应驰豫时间要求，确定该控制技术下“车来灯亮”以及无来车时“车走灯暗”亮度水平和间隔时间规定。由该技术制定的应用方案用于实际工程，不仅可保证隧道照明安全性，更可在现有规范基础上进一步降低隧道照明能耗，实现低交通量下实时动态的智慧节能照明控制。根据实际工程照明效果测试，所采用的方案可降低隧道照明年运营费用达72%。该技术对提升隧道照明安全和节能水平，推动隧道提质升级和公路交通绿色低碳水平具有积极的促进作用。     

电气化公路技术研究

交通是能源消纳的重要领域，其对社会能源结构的调整和节能减排具有重要的影响和带动作用。在陆路交通方面，轨道交通和小型客运车辆的电气化发展方向相对清晰，而公路货运尚无明确的技术路线。为充分利用清洁能源，减少化石能源在交通领域中的使用，发展并推广电气化公路技术，对重载卡车的蓄电池、燃料电池、混合动力3种电气化方案进行对比分析，结合卡车负载的特点，对不同电气化方案进行评估。研究融合新能源发电及并网、混合动力技术、智能驾驶技术的电气化公路技术，从车辆动力技术、供电线路、受电弓与计费、新能源并网、编组智能驾驶运行5个方面对电气化公路方案进行介绍，可以实现公路货运系统的绿色、安全、高效运行。以10公里线路电气化为例，进行规划和成本估算，构建单车和区域（或路段）电气化的运营成本计算模型，基于燃油消耗和阻力分析2种方法进行计算。对车辆购置及改装、基础设施建设、可再生能源发电、系统环保效益等4个方面进行技术分析与成本测算。从供能技术变革、商业模式和推广路线3个角度对电气化公路技术的未来推广进行论证展望。研究结果表明：电气化公路技术的应用与规模化能够带来巨大的经济与环境收益，其中的混合动力方案与架空线输电方案为面对未来可能的储能技术变革与无线输电普及打下重要的基础，提供了拓展空间，也是重载货车实现智能驾驶的重要步骤；与燃油驱动相比，电驱动百公里成本减少96元，单一重卡年运营成本减少18.8万元，百公里污染物（如：碳氧化物、氮氧化物等）均减少50%以上。     

城市交通能耗区的识别及等级划分方法研究

随着社会经济的发展，机动车保有量急剧增长，城市化过程中交通拥堵问题日趋严重，交通能源消耗加剧。为了降低由此带来的损失，需要及时探明路网中交通效率低、能耗高的区域，并采取有效的交通管理措施。通过研究交通状态与能耗的关系，进行相应的交通参数分析，建立能耗区识别及等级划分模型，计算得到3个等级能耗区的界定阈值分别为0．411和0．678。     

A tyre slip-based integrated chassis control of front/rear traction distribution and four-wheel independent brake from moderate driving to limit handling

This paper presents a tyre slip-based integrated chassis control of front/rear traction distribution and four-wheel braking for enhanced performance from moderate driving to limit handling. The proposed algorithm adopted hierarchical structure: supervisor – desired motion tracking controller – optimisation-based control allocation. In the supervisor, by considering transient cornering characteristics, desired vehicle motion is calculated. In the desired motion tracking controller, in order to track desired vehicle motion, virtual control input is determined in the manner of sliding mode control. In the control allocation, virtual control input is allocated to minimise cost function. The cost function consists of two major parts. First part is a slip-based tyre friction utilisation quantification, which does not need a tyre force estimation. Second part is an allocation guideline, which guides optimally allocated inputs to predefined solution. The proposed algorithm has been investigated via simulation from moderate driving to limit handling scenario. Compared to Base and direct yaw moment control system, the proposed algorithm can effectively reduce tyre dissipation energy in the moderate driving situation. Moreover, the proposed algorithm enhances limit handling performance compared to Base and direct yaw moment control system. In addition to comparison with Base and direct yaw moment control, comparison the proposed algorithm with the control algorithm based on the known tyre force information has been conducted. The results show that the performance of the proposed algorithm is similar with that of the control algorithm with the known tyre force information.     

城市轨道交通车辆能耗计量及管理系统

介绍了城市轨道交通车辆能耗计量及管理系统的结构、功能.城市轨道交通车辆能耗计量及管理系统采用六通道能耗计量装置和RFID(射频识别)列车定位技术,实现了对地铁车辆能耗的分类计量.建立GPRS(通用分组无线服务)无线传输数据机制和地铁车辆能耗管理平台,处理并存储能耗数据,自动生成曲线和统计报表,实现地铁车辆能耗信息化管理.该系统已在上海轨道交通1号线01A02车型上试点应用,基本功能已得到验证.     

三峡库区船舶碰撞能量损失方法的研究

采用外部碰撞力学方法计算2艘2 000 t级化学品船以不同速度,不同碰撞角,在不同碰撞点相撞后的能量损失,并利用显示动力有限元软件LS_DYNA模拟2艘化学品船在能量损失最大情况下碰撞的响应.     

能效设计指数EEDI功率曲线的直接计算方法

船舶能效规则强制生效后，所有适用船舶必须满足Attained EEDI≤Requied EEDI的条件，因此准确估算或预报功率曲线从而计算得到Attained EEDI将对适用船型具有极为重要的意义。根据国内外关于功率-转速-航速预报的最新进展，依据螺旋桨敞水性能图谱，采用KT/J^2系数，给出了功率曲线的直接计算方法，经实际算例验证，该方法相对传统的间接计算方法更为清晰简便，且结果准确可靠。     

寒冷地区公路隧道节能照明设计

鉴于快速发展的公路隧道在设计及运营管理过程中暴露出的许多不足,如由于我国照明设计规范中的设计照明参数值较大,公路隧道照明耗电负荷大于90 k W/km,高耗电现象较多,故导致很多隧道运营时往往只使用设计照明负荷的1/2或1/3,甚至很多低等级公路隧道干脆不开照明灯,给隧道运营带来了安全隐患。文章就完善公路隧道节能照明设计展开分析,力求对公路隧道节能照明设计提供借鉴。     

Mitigating the effect of impact loading on a vehicle using an essentially nonlinear absorber

The aim of this study is to investigate the ability of an essentially nonlinear vibration absorber to mitigate the large accelerations transmitted to a passenger compartment of a vehicle which is subjected to shock-type transient loading at the chassis. For such problems, the induced vibration typically attains its maximum value shortly after the application of the loading; thus, it may be impossible to dissipate a major portion of the input energy prior to the occurrence of the peak response. Here, a class of absorbers possessing a form of discontinuous essential stiffness nonlinearity is employed to achieve the desired mitigation. In this paper, we apply a single vibro-impact (VI) absorber to the chassis and examine whether the resulting energy transfer mechanism is an effective way to reduce the peak value of the inertial force measured at the passenger compartment. The influence of the absorber parameters is first studied based on a practical impulsive force, and the optimal design of the absorber is then obtained. Next, an asymmetric clearance arrangement of the absorber is suggested to facilitate the mitigation. Finally, an impulsive acceleration excitation is applied to the system to examine the robustness and efficacy of the optimised absorber. Results of numerical simulations demonstrate that a properly designed VI absorber can significantly decrease the maximum inertial force at the passenger compartment, generated by external impulsive excitations.     

基于卷积型小波包变换的船用水位调节器故障辨识

以某型蒸汽船的主冷凝器水位调节器为研究对象,应用卷积型小波包变换提取各种故障信号分解后的相对小波包能量,建立水位调节器标准故障库,并引进Euclidean空间距离公式作为判据进行故障识别。实验结果表明,该方法可以对水位调节器的典型故障进行快速、正确分类,降低了其故障定位与维修的盲目性。