客运专线动车组运用计划的计算机编制

根据动车组运用规则，建立了动车组运用计划整数规划模型．为降低求解的复杂性，将动车组运用计划编制问题转化为交路段生成和基于交路段的交路生成两个问题分步求解．用多起点搜索和交路段互换的方法，使求解结果在有效性和均衡性上得以优化．实际编制实验表明了模型和算法的有效性．     

单轴加速度计在轴功率测量中的应用研究

介绍了一种利用重力加速度测量旋转机械主轴转速的方法,通过单轴加速度计与计算机技术的融合,实现了轴转速的测量,该方法提供了轴输出功率测量的一体化方案,安装操作简单成本低廉,能够适应较为复杂的测量环境要求。     

Modification of the Highway Capacity Manual two‐lane highway analysis procedure for Spanish conditions

The US Highway Capacity Manual (HCM) methodology is used in Spain to evaluate traffic operation and quality of service. The effect of passing manoeuvre on two‐lane highway operational performance is considered through adjustment factors to average travel speeds and percent time spent following. The procedure is largely based on simulations in TWOPAS and passing behaviours observed during US calibrations in the 1970s. It is not clear whether US driving behaviour and vehicles' performance are comparable with Spanish conditions. The objective of this research is to adapt the HCM 2010 methodology to Spanish driver behaviour, for base conditions (i.e. no passing restrictions). To do so, TWOPAS was calibrated and validated based on current Spanish passing field data. The calibration used a genetic algorithm. The case study included an ideal two‐lane highway with varying directional traffic flow rate, directional split and percentage of trucks. The updated methodology for base conditions is simpler than the current HCM 2010 and does not rely on interpolation from tables. Copyright © 2016 John Wiley & Sons, Ltd.     

The speed control effect of highway tunnel sidewall markings based on color and temporal frequency

The low‐luminance monotonous environment in the middle section of highway tunnels offers few reference points and is prone to cause severe visual illusion. Thus, drivers tend to underestimate their driving speed, which can induce speeding behaviors that result in rear‐end collisions. Therefore, discovering low‐cost methods of traffic engineering that reduce this visual illusion and ensure a steady driving speed is an important challenge for current highway tunnel operations. This study analyzes the effects of sidewall markings in typical highway tunnels, specifically observing how their colors and temporal frequencies affect the driver's speed perception in a low‐luminance condition. A three‐dimensional model of the middle section of highway tunnels was built in a driving simulator. Psychophysical tests of speed perception were carried out by the method of limits. The precision of the simulation model was then checked by comparing the results to field test data. The simulation tests studied the stimulus of subjectively equal speed and reaction time in relation to sidewall markings in different colors (red–white combined, yellow–white combined, and blue–white combined). Furthermore, based on the optimal color, the effects of sidewall marking with different temporal frequencies (0.4, 0.8, 1.2, 2, 4, 8, 12, 16, and 32 Hz) on the speed perception of drivers were also analyzed. The test results reveal that the color and temporal frequency of sidewall marking have a significant impact on the driver's stimulus of subjectively equal speed and reaction time. The subjects have the highest speed overestimation and an easy speed judgment with the red–white combined sidewall marking. Within the temporal frequency range of 4.45–7.01 Hz, the subjects have a certain degree of speed overestimation (less than 20%), and the speed perception is sensitive to the temporal frequency changes. Copyright © 2016 John Wiley & Sons, Ltd.     

Integrated optimization of bus priority operations in connected vehicle environment

Most previous works associated with transit signal priority merely focus on the optimization of signal timings, ignoring both bus speed and dwell time at bus stops. This paper presents a novel approach to optimize the holding time at bus stops, signal timings, and bus speed to provide priority to buses at isolated intersections. The objective of the proposed model is to minimize the weighted average vehicle delays of the intersection, which includes both bus delay and impact on nearby intersection traffic, ensuring that buses clear these intersections without being stopped by a red light. A set of formulations are developed to explicitly capture the interaction between bus speed, bus holding time, and transit priority signal timings. Experimental analysis is used to show that the proposed model has minimal negative impacts on general traffic and outperforms the no priority, signal priority only, and signal priority with holding control strategies (no bus speed adjustment) in terms of reducing average bus delays and stops. A sensitivity analysis further demonstrates the potential of the proposed approach to be applied to bus priority control systems in real‐time under different traffic demands, bus stop locations, and maximum speed limits. Copyright © 2016 John Wiley & Sons, Ltd.     

基于 GT-Crank 仿真的柴油机气缸磨损时瞬时转速分析

利用 GT‐Crank 软件对柴油机曲轴瞬时转速进行仿真分析计算,研究了正常状态、单缸磨损、多个相邻缸磨损和多个非邻缸磨损状态下瞬时转速的变化规律,提取了状态特征参数,并分析了气缸磨损对其他缸的影响,为深入研究瞬时转速在柴油机状态检测诊断中的应用提供了理论依据。     

Connected variable speed limits control and car-following control with vehicle-infrastructure communication to resolve stop-and-go waves

The vision of intelligent vehicles traveling in road networks has prompted numerous concepts to control future traffic flow, one of which is the in-vehicle actuation of traffic control commands. The key of this concept is using intelligent vehicles as actuators for traffic control systems. Under this concept, we design and test a control system that connects a traffic controller with in-vehicle controllers via vehicle-to-infrastructure communication. The link-level traffic controller regulates traffic speeds through variable speed limits (VSL) gantries to resolve stop-and-go waves, while intelligent vehicles control accelerations through vehicle propulsion and brake systems to optimize their local situations. It is assumed that each intelligent vehicle receives VSL commands from the traffic controller and uses them as variable parameters for the local vehicle controller. Feasibility and effectiveness of the connected control paradigm are tested with simulation on a two-lane freeway stretch with intelligent vehicles randomly distributed among human-driven vehicles. Simulation shows that the connected VSL and vehicle control system improves traffic efficiency and sustainability; that is, total time spent in the network and average fuel consumption rate are reduced compared to (uncontrolled and controlled) scenarios with 100% human drivers and to uncontrolled scenarios with the same intelligent vehicle penetration rates.     

设计时速 160 km 以下铁路隧道（普货、有砟轨道）内轮廓标准研究

当前运营的时速160 km以下有砟轨道（普货）隧道内轮廓尽寸难以满足大型养护机械（特别是大型清筛机）作业空间需求,通过对新建时速160 km以下电气化铁路、单双线隧道内轮廓主要影响因素（建筑限界、接触网悬挂方式及布置、大型养护机械空间需求、轨道结构型式、侧沟及电缆槽设置等）进行综合分析,确定单双线有砟轨道隧道内轮廓控制性尺寸,并初步拟定满足大型养护机械作业要求的内轮廓方案,在此基础上通过对内轮廓方案的结构安全性、经济性及施工便利性进行综合比较,确定推荐方案,该成果对铁路行业隧道通用图编制有一定的参考价值。     

欧曼组合仪表拨码器

介绍欧曼汽车仪表设计中的拨码器,阐述其原理、结构、性能参数、软硬件电路及特性,用实例来说明拨码器的调整。     

汽车空调风机无刷直流双模糊PI调节的无级调速系统研究

研究的对象是汽车空调风机的无级调速系统,该系统采用双闭环控制,内环和外环都采用模糊PI控制策略。通过对仿真结果的分析,表明模糊PI控制优于传统的PI控制,证明了该无级调速系统仿真模型的正确性。