西林河大桥桥头引道沉降防治试验

文中介绍了西林河大桥桥头引道沉降防治试验,并对试验结果进行分析。     

客运专线动车组运用计划的计算机编制

根据动车组运用规则，建立了动车组运用计划整数规划模型．为降低求解的复杂性，将动车组运用计划编制问题转化为交路段生成和基于交路段的交路生成两个问题分步求解．用多起点搜索和交路段互换的方法，使求解结果在有效性和均衡性上得以优化．实际编制实验表明了模型和算法的有效性．     

IP ADDRESS AUTOCONFIGURATION FOR WIRELESS AD HOC NETWORKS

IntroductionWireless ad hoc networks are gaining increas-ing popularity in recent years because of their easeof deployment. No wired base station or infras-tructure is supported,and each hostcommunicatesone anothervia packetradios. In ad hoc networks,routing protocols are challenged with establishingand maintaining multihop routes in the face of mo-bility,bandwidth limitation and power con-straints. In ad hoc networks,each node( host)acts as a router since routes are mostly multihop.Nodes in …     

小波包分析在头肩序列的人脸检测中的应用研究

根据可视电话以及视频会议的视频处理对象，主要是头肩序列的特点和人眼的视觉特性，结合小波包分析，提出了一种综合小波包分析、人脸肤色和人脸几何特征的人脸检测方法．试验表明，该方法在彩色头肩序列的人脸检测中性能良好．     

智能化多功能汽车性能检测仪的研究

针对汽车整车基本性能及保安性能测试技术 ,兼容现有测试仪器的传感设备 ,基于虚拟仪器的思想 ,提出了智能化、集成化检测仪的设计方案 ,解决了多参数集中同步测量、试验数据现场处理等问题。该装置可取代多种仪器完成车辆基本性能测试     

载人潜器非耐压结构多目标优化设计

基于近似模型技术和多目标优化理论开展框架结构优化设计。针对传统优化方法不能实现自动计算和连续优化的问题,采用APDL参数化语言实现了框架结构的参数化建模,并将Ansys与ISIGHT集成搭建了框架结构的优化设计流程。基于试验设计,根据灵敏度分析完成了框架结构设计变量的筛选,通过近似模型的精度分析构建了框架结构响应面近似模型。采用响应面近似模型进行数值计算,使用智能优化算法完成框架结构单目标和多目标优化设计,并将结果与有限元计算值对比,验证基于近似模型优化的准确性。     

基于AT89S52单片机的民用地震报警器的设计

为实现地震信息的报警及生命信息的探测,设计了地震检测报警系统。根据地震波的特点,采用加速度传感器检测地震波,经单片机分析、处理后,判断地震发生与否。如果检测到地震发生,警报系统第一时间向人们发出地震警报和逃生语音提示,之后通过内置的生命探测红外传感器探测周围的生命信息,当检测到被困人员时,无线发射模块向外界发送两种不同频率的电磁波,进行无线求救和语音求助,以求最大限度地减少地震灾害造成的损失。     

单轴加速度计在轴功率测量中的应用研究

介绍了一种利用重力加速度测量旋转机械主轴转速的方法,通过单轴加速度计与计算机技术的融合,实现了轴转速的测量,该方法提供了轴输出功率测量的一体化方案,安装操作简单成本低廉,能够适应较为复杂的测量环境要求。     

Modification of the Highway Capacity Manual two‐lane highway analysis procedure for Spanish conditions

The US Highway Capacity Manual (HCM) methodology is used in Spain to evaluate traffic operation and quality of service. The effect of passing manoeuvre on two‐lane highway operational performance is considered through adjustment factors to average travel speeds and percent time spent following. The procedure is largely based on simulations in TWOPAS and passing behaviours observed during US calibrations in the 1970s. It is not clear whether US driving behaviour and vehicles' performance are comparable with Spanish conditions. The objective of this research is to adapt the HCM 2010 methodology to Spanish driver behaviour, for base conditions (i.e. no passing restrictions). To do so, TWOPAS was calibrated and validated based on current Spanish passing field data. The calibration used a genetic algorithm. The case study included an ideal two‐lane highway with varying directional traffic flow rate, directional split and percentage of trucks. The updated methodology for base conditions is simpler than the current HCM 2010 and does not rely on interpolation from tables. Copyright © 2016 John Wiley & Sons, Ltd.     

The speed control effect of highway tunnel sidewall markings based on color and temporal frequency

The low‐luminance monotonous environment in the middle section of highway tunnels offers few reference points and is prone to cause severe visual illusion. Thus, drivers tend to underestimate their driving speed, which can induce speeding behaviors that result in rear‐end collisions. Therefore, discovering low‐cost methods of traffic engineering that reduce this visual illusion and ensure a steady driving speed is an important challenge for current highway tunnel operations. This study analyzes the effects of sidewall markings in typical highway tunnels, specifically observing how their colors and temporal frequencies affect the driver's speed perception in a low‐luminance condition. A three‐dimensional model of the middle section of highway tunnels was built in a driving simulator. Psychophysical tests of speed perception were carried out by the method of limits. The precision of the simulation model was then checked by comparing the results to field test data. The simulation tests studied the stimulus of subjectively equal speed and reaction time in relation to sidewall markings in different colors (red–white combined, yellow–white combined, and blue–white combined). Furthermore, based on the optimal color, the effects of sidewall marking with different temporal frequencies (0.4, 0.8, 1.2, 2, 4, 8, 12, 16, and 32 Hz) on the speed perception of drivers were also analyzed. The test results reveal that the color and temporal frequency of sidewall marking have a significant impact on the driver's stimulus of subjectively equal speed and reaction time. The subjects have the highest speed overestimation and an easy speed judgment with the red–white combined sidewall marking. Within the temporal frequency range of 4.45–7.01 Hz, the subjects have a certain degree of speed overestimation (less than 20%), and the speed perception is sensitive to the temporal frequency changes. Copyright © 2016 John Wiley & Sons, Ltd.