广州珠江黄埔大桥北汊斜拉桥钢箱梁架设起重机研究设计

根据广州珠江黄埔大桥北汊斜拉桥的钢箱梁结构及地理安装特点,提出了该桥钢箱梁的架设方案,针对钢箱梁架设方案研究提出了架梁起重机的实施方案,并对该型起重机的技术特点进行了总结。     

珠江黄埔大桥北汊桥钢主梁应力不均匀性研究

珠江黄埔大桥北汊桥主梁采用扁平钢箱梁,结合该工程,采用混合有限元方法计算钢箱梁的受力,得到钢主梁板件的应力,分析箱梁顶板和底板应力分布的不均匀性,揭示斜拉桥中扁平钢箱梁的应力分布特点。     

钢纤维掺量及规格对桥梁用超高性能混凝土性能影响的研究

为了探究钢纤维掺量及规格对桥梁用超高性能混凝土施工性能和力学性能的影响,通过设置不同钢纤维掺量(0％、0.5％、1％、1.5％、2％、2.5％、3％、3.5％、4％)和长径比(65、80、90、100)进行对照试验,分别得到试件的扩展度、抗压强度、抗折强度.试验结果表明:当钢纤维长径比为65时,随着掺量的增加,超高性能...     

弧形防浪墙波浪力的试验研究

在斜坡式防浪建筑物中,为满足越浪与稳定要求,减少工程投资,常在堤顶设置防浪墙。通过三分力天平对常用的直立式、不同墙底高程和墙高组合下的圆弧式防浪墙进行物理模型试验,直接测量作用其上的波浪力,分析不同形式下防浪墙的整体稳定性,讨论防浪墙形式引起的波浪力的变化关系。     

船用D36钢焊接工艺

根据现代船舶发展,船用高强度钢也逐步用在船体结构的制造中,文章以D36钢为例,结合高强度钢的特点从焊接材料选择、焊前准备、焊接过程、焊后检验等方面详细介绍焊接工艺过程及焊接质量控制中应该注意的问题,总结出实际生产中高强度钢的焊接工艺。     

预压应力合金钢管在先压法拉压预应力混凝土简支梁中的应用

通过花辰公路油墩港桥先压法拉压预应力混凝土简支梁施工实践,将预压应力合金钢管在大跨度简支T梁上的应用流程及使用效果加以描述     

Tool Wear Prediction in Micro-end-milling with Hard Material

The applications of micro-machining have increased drastically in the last ten years. However, tools with less than 1mm diameter using for micro-mills have very short and unpredictable life when they are used to cut hard metals. In this study, preliminary design of experiment (DOE) test program was conducted to investigate and identify the factors affecting tool wear at the micro-scale with hard material. Analysis of variance (ANOVA) and Taguchi method were efficient to determine appropriate cutting condition and the effect of parameters. A simple model was also developed to predict the width of slots on the workpiece along the cutting length. The obtained results can provide the basic guidelines for parameter setting of micro-end-milling with hard material.     

Investigation of Wall Pressure Fluctuations in a Turbulent Boundary Layer by Large Eddy Simulation

Large eddy simulation (LES) was used to investigate the space-time field of the low Mach number, fully developed turbulent boundary layer on a smooth, rigid flat plate. The wall-pressure field simulated by LES was analyzed to obtain the pressure statistics, including the wall-pressure root-mean square, skewness and flatness factors, which show the wall pressure distribution was not Gaussian. The profile of the auto-power spectral density and the contour of the streamwise wavenumber-frequency spectral density of wall-pressure were plotted. The "convection ridge" can be observed clearly and the convection velocity can be calculated from the location of the convection peak.     

钢纤维混凝土在港口铁路挡墙中的应用

分别介绍了普通混凝土和钢纤维混凝土的使用情况,分析了钢纤维混凝土的性能及其对工程的影响。指出:实践证明,钢纤维混凝土较普通混凝土,具有较高的抗拉、抗压强度,较好的韧性和耐磨性。     

浅谈通过完善控制程序消除钢结构频繁开焊一法

分析了门座式起重机主臂架钢结构频繁开焊的原因,提出了解决方案。通过完善设备控制程序,改善设备钢结构受力力流,消除设备隐患。