Locating rental stations and bikeways in a public bike system

To determine the spatial distribution of rental stations and bikeways in a public bike system, this paper proposes a facility location and network design model. The model is developed as a multi-objective programing problem that considers four objectives (minimizing cyclist risk, maximizing cyclist comfort, minimizing adverse impacts on traffic and maximizing service coverage) and multiple constraints (monetary budget, network connectivity, station spacing, bikeway types, station number and value ranges of decision variables). The ε-constraint method solves the programing problem for the public bike system in Daan District, Taipei City, Taiwan. The nine non-dominated alternatives generated are all markedly better than existing locations of rental stations and bikeways. Scenario analysis results indicate that increasing the construction budget for bikeways significantly improves cyclist safety and comfort whilst increasing the adverse impact on traffic. Planners can use this model to develop public bike systems that spatially integrate rental stations and bikeway networks.     

Analysis of the Circulation System of a Slurry Shield and the Muck Carrying Ability of a Dredging Pipe北大核心CSCD

The circulation system of a slurry shield is composed of a transportation system and a processing system.For shield construction, correct selection of the circulation system for the slurry shield is directly related to construc-tion speed. Using the Nanjing Yangtze tunnel as an example, the material balance calculation of the circulation sys-tem, sieving effect analysis, and analysis of the muck carrying ability of the dredging pipe are conducted for various strata. The practical results show that above mentioned calculations and analysis method provide a good reference for the proper selection of a slurry separation system and dredge pipe. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

组合型水泥粉煤灰碎石桩(CFG桩)复合地基在深厚软基处理中的应用

在深厚软土地基(fak≤100 kPa)上建造储罐等建筑物,承载力要求高、不均匀沉降变形要求严,若采用单一CFG桩复合地基加固,可能导致桩距过小或桩长太长,需要采用组合型复合地基,CFG桩+振冲碎石桩复合地基是组合型复合地基的一种。根据CFG桩+碎石桩组合型复合地基的加固机理,分析了其受力特性以及CFG桩和碎石桩的作用,研究表明CFG桩对提高地基承载力和减小沉降起控制作用。基于优化理论,建立了组合复合地基的优化设计方法。通过工程实例讨论了组合复合地基的优化设计方法,结果表明:复合地基的承载力、沉降量和经济效益均满足工程要求。     

Assessing the impact of reduced visibility on traffic crash risk using microscopic data and surrogate safety measures

Due to the difficulty of obtaining accurate real-time visibility and vehicle based traffic data at the same time, there are only few research studies that addressed the impact of reduced visibility on traffic crash risk. This research was conducted based on a new visibility detection system by mounting visibility sensor arrays combined with adaptive learning modules to provide more accurate visibility detections. The vehicle-based detector, Wavetronix SmartSensor HD, was installed at the same place to collect traffic data. Reduced visibility due to fog were selected and analyzed by comparing them with clear cases to identify the differences based on several surrogate measures of safety under different visibility classes. Moreover, vehicles were divided into different types and the vehicles in different lanes were compared in order to identify whether the impact of reduced visibility due to fog on traffic crash risk varies depending on vehicle types and lanes. Log-Inverse Gaussian regression modeling was then applied to explore the relationship between time to collision and visibility together with other traffic parameters. Based on the accurate visibility and traffic data collected by the new visibility and traffic detection system, it was concluded that reduced visibility would significantly increase the traffic crash risk especially rear-end crashes and the impact on crash risk was different for different vehicle types and for different lanes. The results would be helpful to understand the change in traffic crash risk and crash contributing factors under fog conditions. We suggest implementing the algorithms in real-time and augmenting it with ITS measures such as VSL and DMS to reduce crash risk.     

深海拖曳系统自稳定二级拖体姿态控制研究

二级深拖系统具有可控性强、母船扰动弱等优点,是重要的海洋探测平台。在实际工作中,二级拖体姿态稳定是保证探测数据准确的基本前提。本文以具有自主调节功能的二级拖体为例,对其姿态控制进行研究。首先建立了二级拖缆的“弹簧——阻尼”模型,并在此基础上建立了二级深拖系统的数学模型。其次根据该系统具有非线性、时变性等特点,设计了具有参数自修正功能的模糊自适应PID控制器,以实现在不同工况下对二级拖体的姿态进行控制。仿真结果表明,未加载控制器时,海况变化对拖体姿态有显著影响,其俯仰角和横滚角均会发生大范围波动。加载模糊自适应PID控制器后,拖体通过自主调节,能够使姿态波动控制在较小范围,从而满足工作要求,验证了拖缆数学模型的正确性和所采用的控制方法的可行性。     

一种新型尾滑道式船载小艇收放系统可行性研究

作为一种新型的尾滑道式船载小艇收放系统,在回收小艇时,小艇需要以一定的航速冲上尾滑道。回收能否成功除了受制于驾驶员操作水平等主观因素,还与滑道的涉水深度、小艇与母船尾滑道的运动响应等客观条件有关。本文利用切片理论计算了小艇与母船尾滑道的运动响应,并对3级及4级海况下回收小艇的可行性进行了分析。     

不同冷却方式对大尺寸钢板感应加热成形的影响

为有效解决船用中厚钢板复杂曲面加工问题,本文探究了空气冷却、正面水冷和反面水冷方式对大尺寸钢板弯曲成型的影响因素。首先采用COMSOL Multiphysics仿真平台模拟了电磁感应加热和冷却变形多物理场同步耦合过程,然后分析了各种因素对大尺寸钢板弯曲成型影响,最后通过实验验证了有限元模型的可靠性,并对感应加热弯曲成型效果进行评估。研究结果表明:(1)相对于水冷,空冷对钢板Y向位移改变效果显著。(2)相对于空冷,水冷对钢板角位移的改变影响明显。(3)当频率为50kHz时,电流频率对表面温度和角位移影响显著。(4)当钢板长宽比≥1:2时,Y向位移的增加比较显著;当长宽比≈1:1时,角位移的改变比较明显。     

应用于船舶压载水处理系统的自清洗过滤器技术

介绍了2种用于压载水处理系统的自清洗过滤器的工作原理和技术特点,并结合过滤器陆基试验的测试结果,对这2种自清洗过滤器在3种水质下的过滤效果和反冲洗效果进行分析和总结,结果可为压载水处理系统用的自清洗过滤器设计和选型提供一定参考。     

长江航道承载力概念研究

以国家号召发展长江航道为背景,在生态航道建设的基础上,首次提出以满足生态效益需求为核心,兼顾经济社会发展、长江水资源综合利用等多种目标,实现长江航道建设可持续发展的长江航道承载力概念。借鉴资源承载力理论体系,运用系统理论、协同理论等理论对航道承载力系统的结构关系进行分析,并提出航道承载力的定义、内涵、特征及航道承载力发展机制。     

近岸深水联排灌注桩施工工艺优化

采用传统的冲孔灌注桩施工工艺进行海上灌注桩施工时,往往会面临适用条件限制、环境污染、施工成本增加等问题。针对三亚凤凰岛项目海上冲孔灌注桩施工特点,介绍通过优化钢平台结构形式及布局设计、泥浆循环系统优化设计、结构稳定性计算、"四新设备"创新应用等措施,有效降低施工成本、提高施工效率、减少环境污染、提高施工质量。结果表明采取的工艺优化和平台改进措施效果良好、实用性强。