基于HMM-SVR的船舶动力设备故障模式识别与状态预测研究

船舶动力设备因故障监测信号样本少、变化缓慢且数据特征呈非线性,使得设备故障模式的准确识别和状态预测比较难。鉴于此,文章研究了基于隐马尔科夫模型的故障模式识别方法,利用该模型将微弱变化的信号特征转换为变化较大的对数似然概率对故障模式实现有效识别。在此基础上进一步提出基于HMM-SVR的设备状态预测模型,将遗传算法用于支持向量回归模型参数寻优,并结合隐马尔科夫模型,实现对设备状态的预测。对船用柴油机进行仿真,结果表明上述模型具有较高的识别率,能准确预测船舶动力设备的当前状态。     

双月池对某援潜救生船运动性能及波面升高的影响

介绍某援潜救生船配设双月池的船型特点,规划双月池和不带月池2种方案来评估双月池开口对援潜救生船船体运动性能的影响。采用三维势流理论对2个方案的运动性能进行计算,得到船体运动响应函数,对船舶运动性能进行短期预报,研究总结双月池效应对援潜救生船运动的影响规律。对比双月池内水面和舷外波面升高的情况,比较两个位置处波面升高的差异性,总结双月池波面升高对潜水钟收放的影响。     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

深厚软土地基钢管桩静载试验研究

通过对软土地基中1根桩长52.5 m、桩径1 m的钢管桩的压桩试验、拔桩试验和水平静载试验,探讨软土地基中钢管桩工程性状和分布规律。结果表明:软土地基钢管桩水平静载试验的最大弯矩值在泥面以下2倍桩径处,且不随着荷载的增加而改变;软土地基的水平静载试验,按照按泥面位移10 mm进行位移控制时,其m值可取3 500 kN/m~4;软土地基由于侧阻力较小,压桩试验时,传递至桩底的轴力值与桩顶荷载的比例可达30%,而拔桩时,该值为12%左右。     

埋地管道防腐层破损点检测技术综合应用研究

对防腐层完整性检测尤其是对防腐层破损点的精确定位,及对检出大、中面积破损点开挖修补,是确保土壤跟管道的有效绝缘、提高阴极保护效果的关键。文中分析了常用埋地钢质管道防腐层破损点检测技术特点,结合现场检测实践,综合应用多种技术,能有效检测埋地钢质管道防腐层破损点。根据测量数据可以判断破损点大小以及是否开挖修理,在管道安全运行及检测的经济性之间寻找结合点。     

水平旋喷桩施工工艺在深圳地铁施工中的应用

在深圳地铁安托山站—侨香站区间矿山法隧道超前支护施工中,由于采用了水平旋喷桩施工工艺,成功地解决了安-侨区间暗挖隧道在饱和粉细砂层及砾砂层中近距离穿越大断面雨水箱涵及φ500 mm次高压燃气管线的难题,节约了施工成本,充分显示了水平旋喷桩施工工艺在富水砂层浅埋暗挖隧道开挖预支护工程应用上的经济优势。文章论述了水平旋喷桩的工艺机理、适应性、优缺点以及在该工程中的应用效果。     

分离式桥现浇连续箱梁钢管支架施工方案

文章以陈家田分离式桥现浇连续箱梁满堂钢管支架施工为例,介绍了在山区软质地基上进行现浇预应力连续箱梁满堂钢管支架施工的总体布置方案,并通过支架力学检算验证了施工方案的可行性,同时阐述了支架地基处理、支架装拆及加载预压等施工过程。     

X80管线钢管的屈强比对其失效评估曲线的影响

X80及以上级别管线钢管的高屈强比是工程应用中的一个突出问题,失效评估曲线是其安全评定的重要依据。文中通过单轴拉伸和断裂韧性试验建立了高屈强比X80管线钢管的特征失效评估图及拟合方程。结果表明：随着钢管屈强比升高,失效评估曲线的截至线（最大载荷比）降低;高、低屈强比钢管的评估曲线在载荷比大于某一临界值时发生分离,且高屈强比钢管的评估曲线处于低屈强比钢管的评估曲线之下;高屈强比钢管的选择3评估曲线比选择1和选择2曲线更偏于安全。     

船用控制台电磁兼容结构设计探讨

随着现代计算机网络技术和智能控制技术的不断进步,对电气控制设备箱体电磁兼容的要求越来越高。本文结合某电磁兼容控制台提出了一种电磁兼容的台体结构设计与同行探讨:设计横截面呈"U"字形及平面矩形的不锈钢框架,与碳钢材料台体壳壁门框孔处以焊接形式固定,配置电磁兼容密封材料,形成完整的电磁兼容结构。实践证明:电磁干扰测试和电磁敏感度测试符合设备正常工作要求,结构简洁,可靠性好,便于MACAD制造。