船用电器柜抗冲击设计研究

为增强船内部电器柜的抗冲击性能,采用有限元法对船内不同安装型式的电器柜结构进行了模态和抗冲击性能仿真分析,通过对比分析得出了使用撑杆加固型式安装的电器柜能显著提高船内电器柜的抗冲击性能的结论,并确定了电器柜抗冲击优化设计方案。     

Mode jumping in the lateral buckling of subsea pipelines

Unburied subsea pipelines under high-temperature conditions tend to relieve their axial compressive stress by forming localised lateral buckles. This phenomenon is traditionally studied under the assumption of a specific lateral deflection profile (mode) consisting of a fixed number of lobes. We study lateral thermal buckling as a genuinely localised buckling phenomenon by applying homoclinic (‘flat’) boundary conditions. By not having to assume a particular buckling mode we are in a position to study transitions between these traditional modes in typical loading sequences. For the lateral resistance we take a realistic nonlinear pipe-soil interaction model for partially embedded pipelines. We find that for soils with appreciable breakout resistance, i.e., nonmonotonicity of the lateral resistance characteristic, sudden jumps between modes may occur. We consider both symmetric and antisymmetric solutions. The latter turn out to require much higher temperature differences between pipe and environment for the jumps to be induced. We carry out a parameter study on the effect of various pipe-soil interaction parameters on this mode jumping. Away from the jumps post-buckling solutions are reasonably well described by the traditional modes whose analytical expressions may be used during preliminary design.     

Vehicle electrification in a developing country: Status and issue,from a well-to-wheel perspective

The increase of public attention, scientific research and political interest in environmental problems associated with transportation has provided the motivation for re-invention of electric vehicles. However the usage of grid-dependent EVs with a high-carbon electricity grid might produce more damage to the environment. This study aims to provide an environmental impact comparison of ICEVs, HEVs and EVs during their usage cycle, by modeling their energy consumption (electricity or fuel) and the supply chains of the supplied energy, (well-to-wheel) based on a life cycle assessment. The results show that running EVs with the existing mixed sources of electrical energy produce larger impacts on the environment 60% of the time; when compared to HEVs. When compared to ICEVs, EVs produce a larger environmental impact on 7 out of 15 environmental impact categories. Overall the environmental impacts of EVs are substantial based on the well-to-wheel analysis. It will continue to be so if no change is made to the methods of electricity generation in the near future. Given that the environmental profile of EVs is linked with the existing national electricity generation mix, the national electricity supply must be made cleaner before the electrification of the urban transport system.     

盾构下坡掘进对推进阻力的影响研究

以神华新街6°煤矿斜井盾构工程为背景,针对盾构下坡掘进工况,通过建立盾构上作用的水土压力载荷与坡度的数学关系模型,推导出推进阻力与坡度的数学公式。结合工程实例,计算水平掘进与6°下坡掘进各推进阻力值,并利用MATLAB软件绘制下坡掘进时推进阻力随坡度变化的曲线。结果表明:1)6°下坡掘进的总推进阻力相对于水平掘进仅减小了约8%,坡度小于13°时,可通过水平掘进时的推进阻力减去重力沿掘进轴线上的分量来近似求得,且偏差小于10%;2)总推进阻力会随坡角的不断增大而减小;3)当坡度大于50.4°后,盾构有自动向下滑移的趋势,刀盘将自动压紧开挖面,导致刀具自动嵌入开挖面,增加了启动扭矩与换刀的难度。     

城市地下道路分(合)流匝道通风阻力特性

为分析多点进出结构的城市地下道路空气流动特性,以长沙市营盘路湘江隧道为原型,通过现场实测、缩尺模型试验以及CFD软件数值模拟方法,对分(合)匝道通风阻力特性进行了研究,考察了雷诺数、风量比、分岔角度对分(合)流匝道阻力特性的影响规律。研究结果表明:1)主隧道与匝道风量比、主隧道与匝道夹角是影响分(合)流匝道局部阻力系数的关键因素;2)城市地下道路分(合)流匝道局部阻力变化特性,不宜简单套用通风管道的三通构件的参数;3)结合最小二乘法和Matlab软件对计算结果进行多因素回归分析,给出了基于长沙营盘路湘江隧道的分(合)流匝道主隧道和匝道的局部阻力系数关联式。研究结果可为复杂结构城市地下道路通风系统阻力特性分析及通风工程优化设计提供方法参考。     

Direct yaw moment control and power consumption of in-wheel motor vehicle in steady-state turning

Driving force distribution control is one of the characteristic performance aspects of in-wheel motor vehicles and various methods have been developed to control direct yaw moment while turning. However, while these controls significantly enhance vehicle dynamic performance, the additional power required to control vehicle motion still remains to be clarified. This paper constructed new formulae of the mechanism by which direct yaw moment alters the cornering resistance and mechanical power of all wheels based on a simple bicycle model, including the electric loss of the motors and the inverters. These formulation results were validated by an actual test vehicle equipped with in-wheel motors in steady-state turning. The validated theory was also applied to a comparison of several different driving force distribution mechanisms from the standpoint of innate mechanical power.     

2型糖尿病患者一级亲属正常糖代谢人群胰岛素抵抗分析

目的探讨2型糖尿病(T2DM)患者糖耐量正常的一级亲属胰岛β细胞功能及胰岛素抵抗情况,并分析胰岛素抵抗的相关因素。方法选取T2DM患者糖耐量正常的一级亲属63例,根据胰岛素抵抗指数分为胰岛素抵抗组及非抵抗组;选取30例健康体检者作为正常对照组。对所选的93例对象进行血压、血糖、胰岛素、血脂的测定,并计算稳态模型胰岛素抵抗指数(HOMA-IR)及胰岛β细胞功能指数(HOMA-β)。结果①糖尿病患者一级亲属组与对照组相比,胰岛素水平、HOMA-IR、HOMA-β明显升高(P<0.05);②胰岛素抵抗组体质指数、舒张压、甘油三酯、餐后血糖、HOMA-β明显高于胰岛素非抵抗组(P<0.05);③相关分析示胰岛素抵抗与体质指数、舒张压、甘油三酯、餐后胰岛素呈正相关(P<0.01,P<0.05),与空腹血糖、餐后血糖、空腹胰岛素、收缩压、胆固醇无显著相关性(P>0.05)。结论T2DM患者一级亲属存在胰岛β细胞代偿性的高分泌,早期已经出现胰岛素敏感性的下降和胰岛素抵抗。胰岛素抵抗与体重增加、舒张压升高及甘油三酯的升高有关。提示对糖尿病患者一级亲属应严格控制体重、血压及血脂,对减少T2DM具有积极意义。     

选择性垂体甲状腺激素抵抗综合征患者的临床特点与THRβ基因突变的研究

目的研究2例选择性垂体甲状腺激素抵抗综合征患者的临床特点及甲状腺激素受体β(THRβ)基因突变,探索该病的发病机制。方法收集2例患者及其父母的临床资料并留取外周血标本,提取基因组DNA,应用PCR-DNA直接测序的方法研究患者及父母的THRβ基因有无突变。结果2例患者及父母的THRβ基因第1-10外显子未发现突变。结论散发性垂体甲状腺激素抵抗综合征患者发病可能与THRβ基因突变无关。     

地震作用下钢筋混凝土桥墩抗倒塌性能研究

为研究混凝土桥墩的结构抗震性能,进行了单墩多自由度体系非线性静力推倒分析、非线性动力分析、增量动力分析。分别采用纤维模型中分布塑性铰和集中塑性铰两种建模方法,建立单墩有限元模型,利用Open Sees软件中的Hysteretic滞回模型考虑各种累积损伤的影响。     

侧推减阻降噪装置设计与应用探索

侧推减阻降噪装置是一种填补国内空白的特种船舶装置,此装置可针对性解决因侧推通道激发的局部紊流及气泡层影响船舶声学设备正常使用的难题,该文介绍了该装置产生的背景、预期功能、设计校核方案及船上安装使用方法,经实船验证,该装置满足母船声学设备使用要求。