海上单桩风力发电平台简化设计

采用在欧洲已经进行商业化运作的独立桩双段结构，桩基础采用带有过渡段的单桩。塔架上的风力发电机采用丹麦Vestas公司的V80风力发电机。参考DNV-OS-J101和API-RP-2A中的工作应力设计法，进行结构静力、桩基础的承载力，涡激振动、疲劳寿命，结构动力学等分析。静力分析分析极端环境下的组合工况；桩基础主要计算桩的轴向承载力和校核水平承载力，并采用有限元模型模拟桩土相互作用；涡激振动分析主要考虑不同风速下塔架的升力以及引起的横向振动；疲劳分析根据涡激振动分析的结果利用S-N曲线对基础寿命进行了评估；动力学分析求出了结构的固有频率，并进行了波浪力作用下的瞬态历程分析。     

京秦线提速路涵过渡段动力仿真与试验对比

结合京秦线提速改造工程进行了列车 路基动力仿真计算。在不同速度条件下,通过对路涵过渡段加固前后状态下机车车辆运行安全舒适性指标、轨道及路基主要动力性能指标的分析计算,对京秦既有线路涵过渡段提速到200km/h的适应性及加固方案的可行性提出了相应评价意见与建议,并与随后的实车试验进行了对比。试验测试结果验证了仿真分析的可靠性。     

Dynamics of ships running aground

A comprehensive dynamic model is presented for analysis of the transient loads and responses of the hull girder of ships running aground on relatively plane sand, gravel, or rock sea bottoms. Depending on the seabed soil characteristics and the geometry of the ship bow, the bow will plow into the seabed to some extent. The soil forces are determined by a mathematical model based on a theory for frictional soils in rupture and dynamic equilibrium of the fluid phase in the saturated soil. The hydrodynamic pressure forces acting on the decelerated ship hull are determined by taking into account the effect of shallow water. Hydrodynamic memory effects on the transient hull motions are modeled by application of an impulse response technique. The ship hull is modeled as an elastic beam to determine the structural response in the form of flexural and longitudinal stress waves caused by the transient ground reaction and hydrodynamic forces. A number of numerical analysis results are presented for a VLCC running aground. The results include bow trajectory in the seabed, time variation of the grounding force, and the maximum values of the sectional shear forces and bending moments in the hull girder.     

内燃机连杆设计计算的若干理论研究

在对多种连杆大量计算的基础上，总结了连杆设计的经验，指出连杆大端对称于中心线的两侧刚度分布均匀，是保证其应力分布均匀的前提，是连杆合理设计的一个重要原则．文中提出，为了保证精度，连杆计算应采用多体接触模型，并对影响计算精度的各种因素做了分析。讨论了螺栓位置和预紧力应如何选取以及齿形制造误差对强度的影响。     

流函数法在减径拔管上限分析中的应用

应用流函数法建立减径拔管的动可容速度场，用上限原理得出减径拔管的上限解，分析了摩擦状态，变形程度及相对壁厚等工艺参数对拉拔载荷的影响，从而得出最佳工艺参数。     

Dynamic Simulation of a Smart Crank and Slider Mechanism

In this paper, a smart crank and slider mechanism is analyzed mostly from a dynamic view. By means of dynamic explicit finite element method, 3D nonlinear structure is simulated. It is proved that the mechanism can effectively accomplish smart movement prescribed. And in order to ensure reciprocal movement with higher frequency, measures should be taken to avoid over heating of parts. Compared with internal energy, kinetic energy of total rigid body is dominating, and Y direction equivalent rigid velocity is much higher than X direction velocity. Equivalent rigid velocity of all parts is consistent with respective movement condition. For both energy and velocity, slider effect is dominating. Three direction equivalent inertia force oscillates. Force amplitude in Y -direction is comparitively the greatest.     

现代船舶动力定位系统设计

围绕现代动力定位系统的设计问题,讨论系统的构建、数学建模、控制器设计和推力器的推力分配,重点给出了基于扩展Kalman滤波的动力定位LQG控制器设计算法。     

渤海波浪地理信息系统的建立

随着地理信息系统(GIS)的广泛应用,建立一个具有波浪预报或后报功能的信息系统为工程建设服务,不仅十分必要,而且随着波浪模拟技术的发展变得可能。文中论述了采用第三代波浪模型中的SWAN(SimulatingWAves Nearshore)来模拟渤海波浪场,在获得较长时间波浪模拟结果的基础上,对渤海波浪地理信息系统的建立进行了一些尝试和探索。这些波浪资料对于港口及海洋工程是十分必要的。     

JKLP-Ⅰ型机车语音记录系统的研制与开发

本文主要介绍JKLP—Ⅰ型机车语音记录系统的工作原理、系统结构以及功能特点等。     

刚性悬挂自由振动特性分析

以南京地铁一号线刚性悬挂参数为依据,利用有限元模态分析法建立了接触网刚性悬挂自由振动的振型,列举出自由振动的各阶频率,并从模拟计算结果中分析了刚性悬挂的一些振动特性。