洋山深水港区一期工程航行安全模拟试验研究

运用电子操纵模拟器 ,预演了第六代集装箱船在各种不利航行条件下进出洋山深水港区的航行过程 ,分析了风、浪、流等环境因素对船舶操纵的影响 ,确定了船舶安全进出港所需的航道宽度、船舶安全靠泊条件和掉头操纵水域尺度。大量的模拟试验研究结果证实 :洋山深水港区具有良好的船舶航行条件 ,船舶按一期工程小洋山方案 (一 )、小洋山方案 (二 )以及小洋山～镬盖塘方案进行靠离泊和掉头操纵无本质差异 ,主要不同点在于船舶通过窄口后小洋山方案 (一 )和小洋山方案 (二 )比小洋山～镬盖塘方案有较长的制动水域     

基于结构疲劳动态可靠性分析的船舶结构概率损伤容限设计

本文根据结构可靠性理论，提出了一种基于结构疲劳动态可靠性分析的损伤容限分析方法，给出结构疲劳裂纹随机扩展过程中疲劳寿命分布和结构疲劳可靠性的表达式。在给定与疲劳寿命有关的各参数条件下求得动态可靠性曲线，从而在结构设计中根据可靠性要求确定或选择设计参数。     

船舶运输精矿粉的安全监管

介绍了船舶运输精矿粉发生的一些严重事故,全面分析了船舶运输含水量过大精矿粉所存在的危险性因素,并根据原因分析提出对此类船舶的安全监督管理建议。     

海上单桩风力发电平台简化设计

采用在欧洲已经进行商业化运作的独立桩双段结构，桩基础采用带有过渡段的单桩。塔架上的风力发电机采用丹麦Vestas公司的V80风力发电机。参考DNV-OS-J101和API-RP-2A中的工作应力设计法，进行结构静力、桩基础的承载力，涡激振动、疲劳寿命，结构动力学等分析。静力分析分析极端环境下的组合工况；桩基础主要计算桩的轴向承载力和校核水平承载力，并采用有限元模型模拟桩土相互作用；涡激振动分析主要考虑不同风速下塔架的升力以及引起的横向振动；疲劳分析根据涡激振动分析的结果利用S-N曲线对基础寿命进行了评估；动力学分析求出了结构的固有频率，并进行了波浪力作用下的瞬态历程分析。     

内燃机连杆设计计算的若干理论研究

在对多种连杆大量计算的基础上，总结了连杆设计的经验，指出连杆大端对称于中心线的两侧刚度分布均匀，是保证其应力分布均匀的前提，是连杆合理设计的一个重要原则．文中提出，为了保证精度，连杆计算应采用多体接触模型，并对影响计算精度的各种因素做了分析。讨论了螺栓位置和预紧力应如何选取以及齿形制造误差对强度的影响。     

Reliability-based calibration of fatigue design guidelines for ship structures

A simple reliability-based framework is applied to calibrate a new set of fatigue design guidelines. This new guideline considers two different approaches for the assessment of both loads, stresses and local stress raising effects, and partial safety factors must be given for any combination of these approaches. For the calibration, the lognormal reliability format is adopted because the hereby-derived partial safety factors can be combined arbitrarily. This means that with a few basic partial safety factors, the combination of partial safety factors to be applied together with any combination of calculation approaches can be determined easily. In the present paper both the adopted reliability format, the applied modeling of uncertainties and the selected target safety index are explained. Based on this, a new guideline is calibrated and the derived partial safety factors are presented. Finally, the new guideline is applied through a numerical example in order to show the applicability of the calibrated partial safety factors, and satisfactory results are found.     

Mobile phone use while driving: public opinions on restrictions

This paper reviews two road-user surveys on the use of mobile phones on the road in Finland where the mobile phone ownership rate is highest in the world (70% in August 2000). From 1998 to 1999 the proportion of drivers that chose to use a mobile phone while driving rose from 56% to 68%, while the proportion of phone using drivers who experienced dangerous situations due to phone use rose from 44% to 50%. The proportion of drivers who used their phones in some way to benefit safety on the road remained at about 55%. The youngest, novice drivers had the highest level of phone usage of all age categories. Over 48% of the interviewees believed that the government should ban the use of hand-held mobile phones while driving, and another 27% believed that all types of mobile phone use should be banned while driving. Those drivers who used their phones the most each day were more likely to want some form of restrictions, than those who had lower usage. This is a strong message to the elected lawmakers and raises the problem of exactly how regulatory bodies would go about controlling the future growth of new driver support and non-driving related communication devices in road vehicles. It was concluded that legislating for hands-free use only would be a reasonable course of action. Mandating that the current generation of equipment should be optimized for hands-free use should result in future generations of in-vehicle equipment also being optimized for hands-free use as a minimum criterion.     

提速电力机车安全监测系统及判据研究

对目前提速电力机车的运用安全、修程修制等问题作了简明的阐述,提出机车安全监测系统研制的总体方案及故障判别原则。     

浅述施工企业安全工作的科学管理

传统安全管理模式的着眼点是在系统运行阶段,致使事故防不胜防。而科学化安全管理,其着眼点是在对危险进行预先识别、分析和控制上,变“事后处理”为“事先控制”,防患于未然。企业管理者必须要转变观念,以人为本,提高专业素质,采用形式多样的人性化管理手段,才能促进现代施工尤其是隧道施工企业安全工作尽早实现科学管理。     

屏蔽盒的设计技巧

针对目前军用电子产品结构设计中，机箱屏蔽盒设汁的繁琐步骤，介绍了一种屏蔽盒设计的新方法，使用该方法，能够快速、准确地设计出满足屏蔽性能要求的屏蔽盒。