前轮定位参数与轮胎特性对前轮摆振影响的研究

前轮定位参数对前轮摆振的影响是极其复杂的,它不仅影响了前轮的几何特性,并且对摆振系统的运动,约束与受力状况均产生重要影响。本文建立了包括全部前轮定位参数的前轮摆振数学模型;并在轮胎试验的基础上,比较系统、全面地研究了前轮定位参数对前轮摆振的影响规律。本文还研究了轮胎蛇形运动频率对汽车动力学摆振的影响。     

独立悬架车辆转向轮侧滑及其影响因素的试验研究

结合独立悬架车辆转向轮定位参数的特点,采用二元二次回归正交组合设计方法设计了试验方案,并对影响转向轮侧滑的轮胎胎压、载荷和车速等相关因素进行了试验研究。通过对试验数据进行回归处理,得到了侧滑量与转向轮定位参数间的定量映射关系,并对其进行了回归系数、回归方程的显著性检验和失拟检验。结合汽车动力学相关理论对试验研究结果进行了分析。     

RLWT与APA车辙试验加载模式比较分析

旋转车辙仪(RLW T-R otary Loaded W hee l T ester or R u tm eter)于20世纪90年代末开始在美国出现,因其轻便、易用,迅速受到关注。研究表明,RLW T与沥青路面分析仪(APA)、国际车辙仪的相关性都不理想。本文利用数字图像处理技术对RLW T与APA车辙试验的加载模式进行了分析,通过量测RLW T试件、APA试件与原样试件中粗集料颗粒长轴与X轴夹角的差异,得出结论:RLW T与APA车辙试验的加载模式存在较大差异。     

汽车转向轮前束与车轮外倾角的设计匹配

重点对转向轮前束与转向轮外倾角的设计匹配进行分析计算,并对东风汽车公司生产的EQ1141G车型和美国通用汽车公司的某高机动性能越野车进行了检验验算,得出了合理的结论,解决了长期困扰汽车转向设计师的转向轮前束与转向轮外倾角的设计匹配难题。     

喷撒颗粒的增粘机理研究

本文建立了向轮轨接触间喷撒颗粒时的摩擦模型，并将此摩擦模型应用于修正的轮轨粘着理论中，对喷撒颗粒的增粘机理进行了理论研究。从理论计算结果可以看出，向轮轨接触间喷撒颗粒的增粘效果是非常明显的，且增粘效果和轮轨的表面状态、颗粒的质量和进入轮轨接触面间的颗粒数量有关。     

起动机渐开线螺旋花键轴的设计及其冷滚轧技术

汽车用起动机电枢轴上的螺旋花键，已多采用冷滚轧加工的多键渐开线螺旋花键来代替铣削加工的四键或六键的矩形花键。阐述了渐开线螺旋键冷忆使用的新轧轮的特点及应用；指明了渐开线螺旋花键轴几何尺寸设计时应注意的问题。     

An ABS control logic based on wheel force measurement

The paper presents an anti-lock braking system (ABS) control logic based on the measurement of the longitudinal forces at the hub bearings. The availability of force information allows to design a logic that does not rely on the estimation of the tyre–road friction coefficient, since it continuously tries to exploit the maximum longitudinal tyre force.

The logic is designed by means of computer simulation and then tested on a specific hardware in the loop test bench: the experimental results confirm that measured wheel force can lead to a significant improvement of the ABS performances in terms of stopping distance also in the presence of road with variable friction coefficient.     

The impact of structural flexibilities of wheelsets and rails on the hunting behaviour of a railway vehicle

The hunting motion of a passenger coach is investigated using a multibody system in which the wheelsets and the rails can be modelled as flexible bodies. By comparing the results for different model variants, in which the structural flexibilities of the wheelsets and of the rails are either taken into account or neglected, the impact of the flexibilities is analysed. It turns out that the flexibilities of both the wheelsets and the rails have a significant impact on the hunting behaviour by increasing the lateral motions of the wheelsets and lowering the critical speed. In order to investigate the impact of the flexibilities under different operating conditions, the calculations are carried out for track geometries using different rail profiles (60E1, 60E2) and different rail cants (1:40, 1:20) and for different values for the friction coefficient (0.25…0.4) at the wheel–rail contact. The results show that the influence of the flexibilities is the strongest for high lateral forces, which occur e.g. for contact geometries leading to high hunting frequencies and for high values of the friction coefficient. The results also show in some cases a strong impact of the flexibilities on the position of the wheel–rail contact on the running surface of the rail, which is of particular interest with respect to wear simulation.     

低动力作用货车转向架动力性能的研究

本文探讨低动力作用货车转向架的原理及其动力性能的计算和评估方法。首先定义9项指标,作为衡量车辆对轨道动力作用的标准。然后研究这些指标的诸因素。在此基础上总结出实现低动力作用的基本途径。本文还应用这些研究成果,提出4种低动力作用货车转向架的设计方案,并通过数值计算,同国内、外主型货车转向架对比,从而论证其在我国铁路采用的可行性。     

Tangential force variation due to the bogie direction reversal procedure

A range of tangential forces is generated within the contact patch when a wheelset moves on the rail. These forces are intensified when incorporating curved tracks and motored axle rail vehicles [Arrus, P., de Pater, A.D. and Meyers, P., 2002, The stationary motion of a one-axle vehicle along a circular curve with real rail and wheel profiles. Vehicle System Dynamics, 37(1), 29–58]. The wheelset is subject to flange contact if an unbalanced force remains in a curve towards the high rail gauge face. The resultant force in the transverse direction includes the lateral force, the radial force, and the creep forces in addition to the effect of the frequent wheelset displacement due to the kinematic oscillation [Iwnicki, S., 2003, Simulation of wheel–rail contact forces. Fatigue Fracture Engineering Material Structure, 26, 887–900]. This article has focused on a potential variation in some of the forces cited when the wheelset is subject to backward and forward movements. A severe wear rate observed within the wheel flange region in Iranian Railways was investigated by operating a test bogie on a curvaceous track. An obvious improvement in the wear rate and wear pattern of the wheels was attained when the second test bogie encountered a bogie direction reversal procedure. This enhancement is considered in this article from the force analysis standpoint.