城市轨道交通盾构同步注浆国内外现状及发展

同步注浆工艺作为盾构施工中的重要环节,其注浆效果对盾构掘进中的沉降控制与及时包裹管片起到重要作用。针对壁后同步注浆的作用进行分析,系统总结同步注浆浆液类型与要求,对比分析3种常用浆液优缺点,结合工程实际需求探讨浆液需求及发展方向。统计国内已建35个地铁盾构施工案例,分析地铁施工采用盾构机类型及管片尺寸,简要分析盾构隧道同步注浆中的热点问题并展开讨论。研究结果表明:浆液种类需根据地层条件进行选取,国内盾构隧道施工过程同步注浆采用单液浆(惰性浆液、可硬性浆液)较多,盾构隧道施工同步注浆双液浆开始逐渐推广,国外盾构隧道施工同步注浆已逐渐向双液浆转变;壁后注浆准确探测与评价对于注浆效果的反馈与地层变形敏感地区至关重要,相关研究有待进一步加强;在含水量大于30%的地层、渗透性极高地层、软弱不均地层且周围近距离穿越建(构)筑物,对沉降控制要求较高的工程中,建议采用双液浆同步注浆施工或辅以克泥效特殊浆液进行施工。     

富水砂卵层基坑封闭降水与回灌工程关键技术

根据济南泉域富水砂卵石地层特点,通过文献调查、理论分析、现场实测,并借助数值模拟计算,分析并优化基坑下卧弱隔水层注浆加固方案,得到注浆加固质量控制技术要点,提出端头井土体加固与封闭止水帷幕下辅助降水的关键技术,研发基坑降水回灌一体化系统及配套装备,攻克传统回灌技术存在的抽灌分离、回灌效率低、运维成本高等施工难题,阐述回灌水质处理、自动加压回灌及水位联动回灌等关键技术创新点,改良回灌井过滤器设置及止水段施工技术,形成富水砂卵层基坑封闭降水与回灌工程关键技术,对推广基坑降水与回灌工程的绿色化、信息化、智能化有一定指导作用。     

秦淮河航道整治中的水下爆破技术

阐述了覆盖层秦淮河对戴家岗段航道水下钻孔爆破的影响,介绍了内河航道水下钻孔爆破的设计与施工工艺,并提出了相应的解决方法.     

海上救生保温用具的设计与试验要求

主要介绍了PH2702型（PH2707型）海上救生保温用具的设计依据、材料和结构型式的选择,以及试验方法和结果。     

客运专线路基褥垫层施工技术

本文主要介绍哈尔滨至大连铁路客运专线褥垫层施工工艺。     

Impact of macrozoobenthic structures on near-bed sediment fluxes

Sandy sediments in shallow coastal waters of the Baltic Sea are often characterised by large numbers of biogenic structures which are produced by macrozoobenthos species. A series of experiments was devised to quantify how the interaction of such structures with the near-bed flow regime affects the sediment flux. Most experiments were done with simplified replicates of structures generated by typical species commonly found in the Mecklenburg Bight, starting with solitary structures and regularly-spaced arrays in a range of characteristic population densities, followed by a complex benthic macrofauna community, both artificial and alive. A laboratory flume channel, equipped with an acoustic Doppler flow sensor and a topography scanning laser, was used for high-resolution measurements (2 mm horizontal step size and 0.3 mm vertical resolution) of sand erosion (220 µm median grain size, at 20 cm s^− 1) and fine particle deposition (8 µm grain size, at 5 cm s^− 1). Sediment transport threshold values were measured for each layout. As a rule-of-thumb, both the erosion fluxes and the deposition of suspended matter increased considerably at low population densities (below 2%, expressed as percent of the sediment surface covered, i.e. roughness density RD). Above densities of 4%, erosion almost stopped inside the test arrays, and deposition remained well below the level of unpopulated areas. An attempt to extrapolate these findings to field conditions (using field current velocity data from 2001) showed that the net flux switched from erosion to deposition for densities above 5%. These parameters can now be integrated into a numerical sediment transport model coupling waves, currents, sediment dynamics and biological processes, which is currently under construction at the Baltic Sea Research Institute (IOW), Rostock, Germany.     

Characteristic flow patterns generated by macrozoobenthic structures

A laboratory flume channel, equipped with an acoustic Doppler flow sensor and a bottom scanning laser, was used for detailed, non-intrusive flow measurements (at 2 cm s^− 1 and 10 cm s^− 1) around solitary biogenic structures, combined with high-resolution mapping of the structure shape and position. The structures were replicates of typical macrozoobenthic species commonly found in the Mecklenburg Bight and with a presumed influence on both, the near-bed current regime and sediment transport dynamics: a worm tube, a snail shell, a mussel, a sand mound, a pit, and a cross-stream track furrow. The flow was considerably altered locally by the different protruding structures (worm tube, snail, mussel and mound). They reduced the horizontal approach velocity by 72% to 79% in the wake zone at about 1–2 cm height, and the flow was deflected around the structures with vertical and lateral velocities of up to 10% and 20% of the free-stream velocity respectively in a region adjacent to the structures. The resulting flow separation (at flow Reynolds number of about 4000 and 20,000 respectively) divided an outer deflection region from an inner region with characteristic vortices and the wake region. All protruding structures showed this general pattern, but also produced individual characteristics. Conversely, the depressions (track and pit) only had a weak influence on the local boundary layer flow, combined with a considerable flow reduction within their cavities (between 29% and 53% of the free-stream velocity). A longitudinal vortex formed, below which a stagnant space was found. The average height affected by the structure-related mass flow rate deficit for the two velocities was 1.6 cm and 1.3 cm respectively (80% of height and 64%) for the protruding structures and 0.6 cm and 0.9 cm (90% and 127% of depth) for the depressions. Marine benthic soft-bottom macrozoobenthos species are expected to benefit from the flow modifications they induce, particularly in terms of food particle capture due to altered particle pathways and residence times, but also for the exchange of gases, solutes and spawn. The present results confirm previous studies on flow interaction effects of various biogenic structures, and they add a deeper level of detail for a better understanding of the fine-scale effects.     

船舶电力推进同步发电机-推进变流器系统谐波特性仿真

对船舶电力推进用同步发电机-推进变流器系统的电压畸变进行了量化分析,建立了该系统的Matlab/Simulink仿真模型,对负载为线性和非线性的两种工况进行了仿真分析,从而确定同步发电机-推进变流器系统中的谐波特性,并针对系统中存在的谐波提出了抑制总谐波及单次谐波畸变的方法.最后,对比分析了仿真谐波畸变值和IEEE标准中规定的畸变值.     

Non-local simulation of the stable boundary layer with a third order moments closure model

A new higher order closure model for the stable boundary layer is presented and compared with Large Eddy Simulation data. The model includes numerical solutions for the mean values, second and third order moments equations. A satisfactory agreement is found between the calculated vertical profiles of the turbulent quantities with those provided by the LES. Furthermore the new model results are compared with profiles obtained with a lower order closure model in order to verify the effective importance of including third order dynamical equations in the model.