集中输水系统船闸阀门缓变速开启方式的研究

集中输水系统船闸阀门缓变速开启方式可以有效利用阀门廊道断面尺寸进行输水,从而缩短闸室输水时间。文中结合工程试验研究,介绍了其设计原则及初步研究成果。试验表明,20级变速开启的充水时间可较匀速开启缩短15%左右,而闸室船舶的系缆力仍可满足规范要求。     

周家嘴路车流起动波速统计研究

通过实际观测和统计分析, 论证了平面交叉口红灯转绿灯时车流起动波速可以满足正态分布假设, 更可以满足泊松分布假设, 后者拟合优度高于前者。揭示了在周家嘴路条件下, 随着车辆排队长度增加, 起动波速会相应变大, 呈负指数规律上升的趋势, 与低速混合路段有明显差异。据此建议, 如将交通流动力学模型应用于高速公路或城市高架道路一类问题时, 状态指数取值在2.5左右为好。     

中低速磁浮交通道岔系统工程设计

道岔系统是保证中低速磁浮列车安全运行的重要转线系统.根据工程实际.对道岔系统的总体结构、组成及功能进行研究,详细分析道岔基础、轨排、接触轨、供电、控制系统,并提出工程实际中的设计计算方法和部分数据,论述道岔系统的设计思路、设计原则,以及工程实际中存在的问题.     

多重功能复合的市域快轨速度目标值研究——以成都市轨道交通13号线为例

成都市轨道交通13号线贯穿中心城区连接新机场同时又串联温江、简阳新城、空港新城等外围组团,全长接近100 km,是一条兼顾城区和市域功能的快线。以13号线为例从两方面的约束出发:一是选用较高速度目标值来节省全线旅行时间,二是不同的站间距对速度目标值的影响,在此基础上,以满足时间目标为目的,考虑对速度目标值选取影响的大小,选择站间距的匹配性、时间目标的适应性、车辆购置费、线网适应性、能耗、土建工程等方面进行比选,通过综合分析法、定性和定量相结合的研究方法,综合各方面的比选结果最终确定全线选用140 km/h的速度目标值,在城区范围内按100 km/h限速的方案。     

轮胎临界速度影响因素分析

分析了轮胎临界速度的影响因素, 在合理假设的基础上, 根据振动理论建立了轮胎使用的力学模型, 得出轮胎变形恢复时间与其有效质量之间的关系。结果发现影响轮胎临界速度的使用因素包括负荷、充气压力、径向变形和胎面磨损量, 载荷一定时, 提高轮胎充气压力, 充气压力一定时, 减轻载荷都有利于提高轮胎使用的临界速度。分析结果与轮胎的实际应用情况相符, 说明该模型可行。     

Balancing energy consumption and risk of delay in high speed trains: A three-objective real-time eco-driving algorithm with fuzzy parameters

Eco-driving is an energy efficient traffic operation measure that may lead to important energy savings in high speed railway lines. When a delay arises in real time, it is necessary to recalculate an optimal driving that must be energy efficient and computationally efficient.In addition, it is important that the algorithm includes the existing uncertainty associated with the manual execution of the driving parameters and with the possible future traffic disturbances that could lead to new delays.This paper proposes a new algorithm to be executed in real time, which models the uncertainty in manual driving by means of fuzzy numbers. It is a multi-objective optimization algorithm that includes the classical objectives in literature, running time and energy consumption, and as well a newly defined objective, the risk of delay in arrival. The risk of delay in arrival measure is based on the evolution of the time margin of the train up to destination.The proposed approach is a dynamic algorithm designed to improve the computational time. The optimal Pareto front is continuously tracked during the train travel, and a new set of driving commands is selected and presented to the driver when a delay is detected.The algorithm evaluates the 3 objectives of each solution using a detailed simulator of high speed trains to ensure that solutions are realistic, accurate and applicable by the driver. The use of this algorithm provides energy savings and, in addition, it permits railway operators to balance energy consumption and risk of delays in arrival. This way, the energy performance of the system is improved without degrading the quality of the service.     

Liner shipping network design with emission control areas: A genetic algorithm-based approach

To curb emissions, containerized shipping lines face the traditional trade-off between cost and emissions (CO₂ and SO_x) reduction. This paper considers this element in the context of liner service design and proposes a mixed integer linear programming (MILP) model based on a multi-commodity pickup and delivery arc-flow formulation. The objective is to maximize the profit by selecting the ports to be visited, the sequence of port visit, the cargo flows between ports, as well as the number/operating speeds of vessels on each arc of the selected route. The problem also considers that Emission Control Areas (ECAs) exist in the liner network and accounts for the vessel carrying capacity. In addition to using the MILP solver of CPLEX, we develop in the paper a specific genetic algorithm (GA) based heuristic and show that it gives the possibility to reach an optimal solution when solving large size instances.     

Theory of safety surrogates using vehicle trajectories in macroscopic and microscopic settings: Application to dynamic message signs controlled traffic at work zones

This paper presents a new mathematical framework for obtaining quantitative safety measure using macroscopic as well as microscopic traffic data. The safety surrogate obtained from the macroscopic data is in terms of analysis performed on vehicle trajectories obtained from the macroscopic data. This method of obtaining safety measure can be used for many different types of applications. The safety surrogate for the traffic dynamics are developed in terms of a new concept of Negative Speed Differentials (NSD) that involve a convolution of vehicle speed function obtained from vehicle trajectories and then performing the integration of the square of the output for its negative values. The framework is applicable to microscopic traffic dynamics as well where we can use car following models for microscopic dynamics or the LWR model for macroscopic dynamics. This paper then presents the use of this new safety surrogate on the development of a feedback control law for controlling traffic in work zones using Dynamic Message Signs. A hybrid dynamics model is used to represent the switching dynamics due to changing DMS messages. A feedback control design for choosing those messages is presented as well as a simple simulation example to show its application.     

Mental models of driving and speed: biases,choices and reality

This paper provides a review of research performed by Svenson with colleagues and others work on mental models and their practical implications. Mental models describe how people perceive and think about the world including covariances and relationships between different variables, such as driving speed and time. Research on mental models has detected the time-saving bias [Svenson, O. (1970). A functional measurement approach to intuitive estimation as exemplified by estimated time savings. Journal of Experimental Psychology, 86, 204–210]. It means that drivers relatively overestimate the time that can be saved by increasing speed from an already high speed, for example, 90–130?km/h, and underestimate the time that can be saved by increasing speed from a low speed, for example, 30–45?km/h. In congruence with this finding, mean speed judgments and perceptions of mean speeds are also biased and higher speeds given too much weight and low speeds too little weight in comparison with objective reality. Replacing or adding a new speedometer in the car showing min per km eliminated or weakened the time-saving bias. Information about braking distances at different speeds did not improve overoptimistic judgments of braking capacity, but information about collision speed with an object suddenly appearing on the road did improve judgments of braking capacity. This is relevant to drivers, politicians and traffic regulators.     

The identification and empirical characterization of vehicular (Lagrangian) fundamental diagrams in multilane traffic flow

Traditional macroscopic traffic flow modeling framework adopts the spatial–temporal coordinate system to analyze traffic flow dynamics. With such modeling and analysis paradigm, complications arise for traffic flow data collected from mobile sensors such as probe vehicles equipped with mobile phones, Bluetooth, and Global Positioning System devices. The vehicle‐based measurement technologies call for new modeling thoughts that address the unique features of moving measurements and explore their full potential. In this paper, we look into the concept of vehicular fundamental diagram (VFD) and discuss its engineering implications. VFD corresponds to a conventional fundamental diagram (FD) in the kinematic wave (KW) theory that adopts space–time coordinates. Similar to the regular FD in the KW theory, VFD encapsulates all traffic flow dynamics. In this paper, to demonstrate the full potential of VFD in interpreting multilane traffic flow dynamics, we generalize the classical Edie's formula and propose a direct approach of reconstructing VFD from traffic measurements in the vehicular coordinates. A smoothing algorithm is proposed to effectively reduce the nonphysical fluctuation of traffic states calculated from multilane vehicle trajectories. As an example, we apply the proposed methodology to explore the next‐generation simulation datasets and identify the existence and forms of shock waves in different coordinate systems. Our findings provide empirical justifications and further insight for the Lagrangian traffic flow theory and models when applied in practice. Copyright © 2015 John Wiley & Sons, Ltd.