路面结构水损坏的研究

无论水泥混凝土路面还是沥青路面,水损坏是目前国内外普遍存在的路面破坏形式,成为困扰公路工程质量的世界性难题。分析了路面水损坏的主要现象及其发生机理,阐述了产生水损坏的相关因素,提出了预防路面水损坏的相关对策。     

倒运海水道整治工程斗朗—川槎大桥段实船适航试验

为验证倒运海水道整治工程是否达到整治标准的通航要求,选取斗朗—川槎大桥段作为实船试验河段,采用该航段设计船型500吨级满载船作为试航船,进行实船适航试验。测量试验河段的水深地形、表面流速流向、航标配布和水位,试验船舶沿设计航线进行上下水航行,实时测量试航船舶航行轨迹、对岸航速、舵角、漂角、船舶与河岸之间的安全距离等航行指标及航行状态,并结合通航规范及标准,对整治后航道技术参数的合理性、航标配布的合理性等进行分析评价。结果表明,本试验航段的整治效果达到了整治标准的通航要求。研究成果可为类似工程提供参考。     

透水沥青路面结构与材料技术要求

传统的非透水路面易造成地下水位降低、水量分配不均衡、水质恶化、热岛效应等生态和环境问题。为了缓解这一系列问题,"海绵城市"的概念因此产生,即通过"渗、滞、蓄、净、用、排"等多种技术途径,实现城市良性水文循环,而这一概念的实现是采用透水路面。透水路面作为一种新型路面铺装技术,该研究对其路面结构和材料进行介绍,如能成功引用,将积极支撑起海绵城市的建设与发展,取得显著的环境和生态效益。     

地铁暗挖隧道二次衬砌施工质量控制浅析

文章根据深圳轨道交通二期工程安托山站—侨香站暗挖区间的二次衬砌施工经验,分析了地铁暗挖隧道二次衬砌施工质量的影响因素以及二次衬砌施工过程中容易发生的质量问题,并提出了具体的控制措施。通过经验总结,使地铁施工的管理、质量控制、施工通病防治上升一个台阶。     

箱形拱桥结构检测及加固处理

文章以梧州西江大桥箱形拱桥为例,在对桥梁结构进行外观检测的基础上,利用Midas Civil 2010建立模型,通过静载和动载试验分析了该桥的承载能力及结构力学特性,提出了相应的维修加固措施,并探讨了维修加固处理的工程效果。     

工程总承包模式下项目业主风险防范探讨

文章结合工程总承包的特点,分析了工程总承包模式下项目业主在项目实施过程中所面临的风险,提出了相应的防范风险的措施。     

LNG储罐罐壁工程质量缺陷及控制措施

LNG储罐是LNG接收站中关键的设备之一,其工程质量非常重要。为使罐壁施工质量达到良好状态,可事先采用施工用的混凝土、钢筋和DOKA模板等施工材料建造小段试验墙,根据这段试验墙可以提前发现工程可能出现的缺陷,这些缺陷包括模板错缝、预埋件凹陷、混凝土表面局部气孔麻面、墙体裂缝、漏浆及混凝土表面色差等,对这些缺陷产生的原因进行分析并采取相应的控制措施,以确保罐壁施工顺利且高质量进行。     

Assessing the impact of reduced visibility on traffic crash risk using microscopic data and surrogate safety measures

Due to the difficulty of obtaining accurate real-time visibility and vehicle based traffic data at the same time, there are only few research studies that addressed the impact of reduced visibility on traffic crash risk. This research was conducted based on a new visibility detection system by mounting visibility sensor arrays combined with adaptive learning modules to provide more accurate visibility detections. The vehicle-based detector, Wavetronix SmartSensor HD, was installed at the same place to collect traffic data. Reduced visibility due to fog were selected and analyzed by comparing them with clear cases to identify the differences based on several surrogate measures of safety under different visibility classes. Moreover, vehicles were divided into different types and the vehicles in different lanes were compared in order to identify whether the impact of reduced visibility due to fog on traffic crash risk varies depending on vehicle types and lanes. Log-Inverse Gaussian regression modeling was then applied to explore the relationship between time to collision and visibility together with other traffic parameters. Based on the accurate visibility and traffic data collected by the new visibility and traffic detection system, it was concluded that reduced visibility would significantly increase the traffic crash risk especially rear-end crashes and the impact on crash risk was different for different vehicle types and for different lanes. The results would be helpful to understand the change in traffic crash risk and crash contributing factors under fog conditions. We suggest implementing the algorithms in real-time and augmenting it with ITS measures such as VSL and DMS to reduce crash risk.     

制动器在水力式升船机中的应用

依托景洪升船机工程,探讨水力式升船机制动器的应用。通过对比分析电力驱动和水力驱动式升船机制动器的布置特点及工作方式,阐述制动器在水力式升船机中面临的新的技术问题,据此对水力式升船机制动器的制动力、同步性以及制动方式提出设计指标和要求,并探讨制动器的使用范围。建议水力式升船机制动器采用常开式,升船机正常运行时,制动器在船厢上、下游对接时投入使用。     

舰船电子元器件自主可控现状与发展需求研究

近年来,我国信息化关键软硬件技术得到了长足发展,特别是基础电子元器件性能有了大幅度提升.然而,在信息化相关的电子元器件技术和产品上与国外还存在较大差距,制约了装备的国产化率和自主可控能力水平的进一步提升.本文分析舰船装备领域基础电子元器件的发展现状,并提出下一步的发展需求建议以及确保基础电子元器件自主可控的具体措施.