Characteristic flow patterns generated by macrozoobenthic structures

A laboratory flume channel, equipped with an acoustic Doppler flow sensor and a bottom scanning laser, was used for detailed, non-intrusive flow measurements (at 2 cm s^− 1 and 10 cm s^− 1) around solitary biogenic structures, combined with high-resolution mapping of the structure shape and position. The structures were replicates of typical macrozoobenthic species commonly found in the Mecklenburg Bight and with a presumed influence on both, the near-bed current regime and sediment transport dynamics: a worm tube, a snail shell, a mussel, a sand mound, a pit, and a cross-stream track furrow. The flow was considerably altered locally by the different protruding structures (worm tube, snail, mussel and mound). They reduced the horizontal approach velocity by 72% to 79% in the wake zone at about 1–2 cm height, and the flow was deflected around the structures with vertical and lateral velocities of up to 10% and 20% of the free-stream velocity respectively in a region adjacent to the structures. The resulting flow separation (at flow Reynolds number of about 4000 and 20,000 respectively) divided an outer deflection region from an inner region with characteristic vortices and the wake region. All protruding structures showed this general pattern, but also produced individual characteristics. Conversely, the depressions (track and pit) only had a weak influence on the local boundary layer flow, combined with a considerable flow reduction within their cavities (between 29% and 53% of the free-stream velocity). A longitudinal vortex formed, below which a stagnant space was found. The average height affected by the structure-related mass flow rate deficit for the two velocities was 1.6 cm and 1.3 cm respectively (80% of height and 64%) for the protruding structures and 0.6 cm and 0.9 cm (90% and 127% of depth) for the depressions. Marine benthic soft-bottom macrozoobenthos species are expected to benefit from the flow modifications they induce, particularly in terms of food particle capture due to altered particle pathways and residence times, but also for the exchange of gases, solutes and spawn. The present results confirm previous studies on flow interaction effects of various biogenic structures, and they add a deeper level of detail for a better understanding of the fine-scale effects.     

双层嵌套多目标概率模型在珠江三角洲港口工程环境分析中的应用

鉴于未来全球气候变暖、台风强度和频次有逐渐加剧的趋势,建港地区工程风险须得到重视。在分析了珠江三角洲所受台风灾害的基本类型后,采用双层嵌套多目标概率模式及复合极值分布模型（MCEVD）对珠三角的台风灾害及超强台风进行了预测,并将计算结果应用于港区最大风速、波高、排水等方面的设计。该模型能全面系统地反映台风致灾的整体机制,在港口工程环境分析中得到了较好的应用。     

轻质耐压壳体减重研究

本文结合几种材料的特性,对壳体的结构做了力学分析,研究了轻质耐压壳体的减重方向。研究中发现,隔板的设计对壳体的重量影响很大,因此详细分析了凹凸两种形式端板的力学特性,发现同等厚度条件下,凸型隔板的变形量小、安全系数高。分析对比了铝基合金、复合材料、钛合金的材料特性、加工特性、国内开发现状以及成本,认为现阶段应以铝基合金的改进为主,并关注其他材料的进展对壳体进行减重设计。     

宣杭铁路复线工程某标段路堤坍塌情况分析

通过对宣杭铁路复线工程某标段路堤坍塌情况的分析可知,采用干喷法加固路基时应结合土层的实际情况．且设计方与施工方要通力合作,对施工方案作相应调整,这是确保工程质量的关键。     

路基填方过度碾压开裂的力学分析

结合兰州市北滨河路银农段路堤填筑施工中出现的大范围的表层裂缝,选取合适的应力函数进行力学分析．从而找到了产生这种裂缝的力学机理．提出防止出现类似裂缝的措施,以指导施工。     

模拟现场工况条件下的无纺布淤堵试验研究

通过对荆江长河段航道整治护坡工程的结构形式及其中常用的短纤针刺非织造土工布进行调研,针对反滤层中无纺布潜在的淤堵问题及其对岸坡稳定性的影响进行分析,研制了模拟现场工况条件的土工合成材料淤堵试验仪,分别将水力梯度、垫层砂厚度、砂的粗细、土质类别及无纺布孔径单一因子对无纺布淤堵的影响进行试验分析,探讨各因子对无纺布淤堵的影响规律。     

Mechanism of Tunnel Water Inflow Caused by Bending Failure of a Waterproof Dike Based on a Circular Thin Plate Mechanical Model北大核心CSCD

Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Model Test on Grouting Law in Dynamic Water-Rich Sand Layers by the Electric Resistance Method北大核心CSCD

In order to study the diffusion law of grouting slurry in the water-rich sand layer under flowing water conditions, a grouting test model consisting of a main test system, a grouting system, and a measurement system was developed. And for detecting the diffusion scope of the grouts, a new resistivity method was proposed. It is found that the relationship between grouting pressure and grouting rate during the test is strong. Under hydrodynamic conditions, the grouting slurry diffuses elliptically. Due to gravity and the effect of the upper water flow, the center of gravity of the ellipsoid is below the grouting outlet, and the grouting effectively improves the physical and mechanical properties of water-rich sand bodies. At the same time, the resistivity method has a good application effect on the detection of grouting diffusion range. The range of slurry diffusion obtained by the resistivity method is basically consistent with the boundary of the stone body after excavation, indicating that the resistivity method is reliable for detection of grouting range in dynamic water-rich sand layer. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

水平旋喷桩施工工艺在深圳地铁施工中的应用

在深圳地铁安托山站—侨香站区间矿山法隧道超前支护施工中,由于采用了水平旋喷桩施工工艺,成功地解决了安-侨区间暗挖隧道在饱和粉细砂层及砾砂层中近距离穿越大断面雨水箱涵及φ500 mm次高压燃气管线的难题,节约了施工成本,充分显示了水平旋喷桩施工工艺在富水砂层浅埋暗挖隧道开挖预支护工程应用上的经济优势。文章论述了水平旋喷桩的工艺机理、适应性、优缺点以及在该工程中的应用效果。